Top Push In Lock Reviews

Master Lock Trailer Lock Trailer Coupler & Receiver Lock Combo Pack 3794DAT Red

  • LOCK APPLICATION: Best used for vehicles, trailers, and RV hitch locks.
  • EASE OF USE: Receiver lock features convenient Push to Lock locking mechanism: push lock body firmly onto the pin and remove key.
  • DURABLE DESIGN: Weather Tough seal and watertight cap provide protection from moisture and dirt.
  • SPECIFICATIONS: Stainless steel trailer coupler lock adjusts from 9/16 in. to 2-3/4 in..
  • Fits 1-7/8 in., 2 in. and most 2-5/16 in. couplers.
  • INCLUDES: One trailer coupler lock, one receiver lock, one trailer coupler latch lock.
  • two keys (both keys open all three locks).
Check Stock

BANVIE ① Car Keyless Entry Security Alarm System + ② Remote Engine Start Starter + ③ Push to Start Stop Iginition Kit Button

  • Keyless Entry: with the basic keyless entry function. such as remote control lock/unlock door, trunk release..
  • 1-Way Alarm: the siren will alarm for 8s when car body shocked, will alarm for 25s when side door opened/ footbrake pressed..
  • Remote Start: remote engine start your car in cold winter or hot summer in advance..
  • Push Button Start: keyless go push button to start stop the engine, very convenient to replace the old key lock.
  • Push Button Auto-lock: 30s after engine stop, the system will auto-lock the push button, do not worry someone will drive your car away..
Check Stock

MICTUNING Trailer Hitch Lock Pin Set 5/8 and 1/2 Inch with One Locking System Anti-Rattle for Class I,II,III,IV,V Hitches

  • 1/2" and 5/8" Hitch Pin Lock Set - Share with One Locking System. 1/2" hitch pin fit Class I and Class II receivers (1-1/4" x 1-1/4"), and 5/8" hitch....
  • Simple Push-to-lock - Simple push-to-lock and 1/4 key turns to unlock mechanism, makes it super convenient to lock and unlock. Our upgraded Anti-theft....
  • Added Security - Extra Safety Clip & Hole in each hitch lock pin add to security in case of the locking system falls out or damaged. Rubber O-rings to....
  • Sturdy & Durable - Made from solid hardened steel with chrome plated finish for high strength, anti-rust and anti-corrosion. The watertight rubber cap....
  • Complete Trailer Hitch Pin Lock Set - Includes 1x 1/2" Pin Lock, 1x 5/8" Pin Lock, 1x Push-to-Lock system with cover, 1x Safety clip, 10x O-rings, 2x....
Check Stock

Zarges Roof Rack Clamps (2) C/W 2 Padlocks

  • 【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
  • usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • 【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • 【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • 【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • 【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check Stock

Master Lock 1479TAT Receiver Lock, 2 Pack

  • Usable length of receiver pin is 2-3/4 in. (70mm).
  • Push to Lock locking mechanism – push lock body onto pin firmly and remove key.
  • Weather Tough seal and water tight cap protects lock from moisture and dirt.
  • 10, 000 lb. Load Rating.4-pin cylinder for added pick resistance.Same key opens both locks.
Check Stock

Master Lock Receiver Lock Stainless Steel Barbell™ Receiver Lock Fits 5/8 in Receivers Weather Resistant Automotive Receiver Lock 1469DAT

  • LOCK APPLICATION: Best used for vehicles, trailers, and RV hitch locks.
  • EASE OF USE: Receiver lock features convenient Push to Lock locking mechanism: push lock body firmly onto the pin and remove key.
  • DURABLE DESIGN: Weather Tough seal and watertight cap provide protection from moisture and dirt.
  • Hitch lock is rated for Class III/IV 10,000 pound load.
  • SPECIFICATIONS: Usable length of receiver pin is 3-1/2 in..
  • Stainless steel lock fits 5/8 in. receiver openings.
  • Extended length shaft fits Toyota Tundra, Ford F-150/F-250/F-350, GMC/Chevy 2500/3500 and Dodge trucks with heavy-duty tow packages.
  • INCLUDES: One trailer reciver lock, two keys.
Check Stock

Land Rover Genuine ROOF Rail Rack Lock System with Keys Range Rover 03-12 VUB002240

  • ▶【Locking hitch pin】 fits 1/2 in. (13 mm) and 5/8 in. (16 mm) receivers.
  • usable length of each chrome hitch pin lock is 2-3/4 in. (70 mm).
  • ▶【1/2 in.】 trailer hitch locking pin is rated up to 3,500 lbs (Class I and II), 5/8 in. trailer hitch locking pin is rated up to 10,000 lbs (Class III and IV).
  • ▶【Locking head】 rotates 360 degrees allowing keyway to conveniently face forward.
  • receiver lock features push-to-lock locking mechanism to ensure a secure lock every time.
  • Push head firmly onto the pin and remove key.
  • ▶【Snap-on cover】 provides weather resistance and prevents dirt and moisture from entering keyway, four-pin cylinder for added security to prevent lock picking.
  • ▶【Receiver lock】 provides added security and theft deterrence while towing. Included Components: Two Pins Two Keys One Locking Swivel Head.
Check Stock

Padlock - Digits Combination Lock,Button Combination Security Padlock Digital Lock, for Gym or Sports Locker, case, Toolbox, Fence, hasp Cabinet (Black)

  • 10 number push button padlock with 5 number pre-set (unchangeable) ，uses: backyard gates, pool fence, cabinet, gym locker, security box Children and elder friendly due to the ease of use.
  • Quick and easy to open 10-digit push button padlock with 5-digit locking mechanism. Hardened steel shackle. Each padlock is individually tested at the factory to ensure smooth performance before packaging..
  • From the Manufacturer locks offer superior security to protect your possessions from theft.This heavy-duty Push Button Combination Padlock uses a 10-number push button face system.Hardened steel-plated shelf-locking shackle and 5-digit locking mechanism.Durable, heavy zinc die cast housing..
  • Random preset numbers for each lock,It can't be modified. The password of this lock has been set, and each lock has a unique and life-long password, so we must remind you not to forget its identity card password, 5 number pre-set （unchangeable) 。.
  • Unlocking method: (1) press this number according to the number of your ID card password. (2) the buckle below the lock. (3) the lock buckle is opened automatically Locking method: (1) press the lock button (2) per return number..
Check Stock

METOWARE Keyed Alike Trailer Hitch Receiver& Coupler Lock Kit, 5/8\ Dia Pin Lock, 1/4” Dia 2-1/2\ Trailer Coupler Lock

  • KEYED ALIKE - One key opens two locks. Each lock comes with 2 keys, for a total of 4 keys..
  • RECEIVER LOCK FEATURE - The Trailer Hitch Receiver Lock Pin is designed with 5/8" diameter and 3-1/2” long to make it works well with class III IV hitches, big towing vehicle, truck, 2” 2-1/2” hitch receiver. (Please confirm your required size or email us for more suggestion before having the order)..
  • HITCH LOCK FEATURES – Made of premium strength steel and coated with electrophoretic paint, our trailer hitch is durable and rust-proof. It is reliable for long-term hauling and is secure for full protection, safely protecting your trailer, boat, camper and so on from theft..
  • RUST PROTECTION& DURABILITY - The electrophoretic paint on the surface of trailer pin lock with the addition of its watertight rubber cap, keep rust at bay even the lock always get soaked on any journey over wet or snowy roads, and keep the keyhole away from water and dirt..
  • PUSH-TO-LOCK DESIGN - Both our trailer hitch lock and receiver lock are designed for easy operation. With the push-to-lock design, you can easily push to lock it without using key. To open it, just turn the key a little bit and the pin will pop out by itself..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)

  • utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
  • Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
  • At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
Check Stock

Prime-Line MP5007 Push Button Screen/Storm Door Latch, Black, (1 set)

  • White Free Hanging Handle Push Button Latch.
  • Designed for out swinging wood or metal doors.
  • Contains two sizes of strikes and shims to provide adjustment for latching.
  • No Lock Out' feature prevents accidental lock out. Can be converted to key locking set.
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock