Top Push Button Flush Lever Reviews

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

153150 | Optifuse Automotive Circuit Breaker | 58 VDC High Amp | 150A | Type III | Manual Reset | Surface Mount | Bussman Cross: 185150F-011

  • Resets with the slide of the lever (Type III)..
  • Can be used as a master disconnect - simply push the button..
Check Stock

153120 | Optifuse Automotive Circuit Breaker | 58 VDC High Amp | 120A | Type III | Manual Reset | Surface Mount | Bussmann Cross: 185120F-011

  • Resets with the slide of the lever (Type III)..
  • Can be used as a master disconnect - simply push the button..
Check Stock

Jmkcoz Angle Fitting Side Mount Toilet Flush Lever Handle for TOTO Kohler Toilet Tank Universal Fit for Most Toilet, Toilet Repair Handle with Nut, Copper Lever

  • ... Lock Nut handle. strong and durable for long time use..
  • EASY INSTALLATION: Side Mount Toilet Lever Handle, suitable for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install. Please note that there is no install instruction, please make sure you can install it before order for a smooth flush..
  • FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread, which can help prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed..
  • FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread, which can help prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed..
Check Stock

Falcon W301D613 W301 Dane 613 30206 30148 Privacy G2

  • Turning inside lever or closing door releases button. Latch by either lever unless outside lever is locked by push button in inside lever.
  • Emergency Button in outside lever unlocks, with use of a blade screwdriver in outside lever and releases inside button.. ..
Check Stock

Nuk3y Azure Grade 2 Commercial Duty Cylindrical Lever Lockeset ADA UL Rated Satin Chrome US26D Entry

  • HEAVY duty ANSI/BHMA A156.2 Grade 2 Certified commercial leverset for either right or left handed doors.
  • BACKSET & THICKNESS- include 2-3/8" AND 2-3/4" backset latch to work for all standard door.
  • Fit all doors 1-3/8" to 2" in thickness..
  • CLUTCH vandal resistant with freewheeling lever for extra security.(Only for Entry and Storeroom Function).
  • SC "C" Keyway will be provided and outsidekeyed different. 2 Keys per lock with 6 pin cylinder. Dual Entry Push button functions - 1) Push button - lock the outside lever until its unlocked by key or turning the inside lever. 2) Push-&-Turn button will covert function into storelock, which require key to open from outside until inside push button is manually unlocked..
Check Stock

Toilet Tank Flush Lever Handle Replacement,Heavy Duty Toilet Lever Handle Metal Flushing Levers Compatible with THU004-CP,St406,St707,St454E,St743E,St706,St743S (Novel Style)

  • Application: the toilet flush lever is a nice replacement that is compatible with St406, St707, St454E, St743E, St706, St743S.
  • Quality material: the flush lever replacement consists of metal-plated wrench with copper rod, which is well constructed, sturdy and serviceable, can serve you for a long term even in the wet environment like bathroom.
  • Easy to install: featuring durability and easy installation, the side-mounted toilet handle is easy to push after installation, helping the toilet work normally efficient.
  • Friendly to use: discreetly designed, the toilet handle is easy to control for children and the elderly without too many efforts, bringing much convenience to your life.
  • Warm prompt: please keep the flush lever away from all corrosive products to help prong the service life of the product.
Check Stock

Copper Creek AL1231SS Avery Lever Satin Nickel

  • ANSI Grade-3 Security Privacy Lever. Reversible for left or right handing..
  • Push Button Privacy locking Function: Ideal for bedrooom and Bathroom use only. Emergency egress function, push button unlocks by rotating lever..
  • "New" exterior privacy release button: operate with coin or standard screwdriver only. No Privacy key required. Does not have a keyed cylinder, not for use where keyed security is required..
  • Steel Round Corner Adjustable Latch (not suitable for Drive-in application). Nickel plated bolts..
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, White Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

White Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed. Packaging design may vary..
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, Chrome Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

Brushed Nickel Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Satin Nickel finish Handle with Lock Nut, Pre-Drilled 8-Inch RodThe universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

WJSKDQ 2PCS Compression Latch Lock Trigger Latch Lock Zinc Alloy Adjustable Lever Hand Operated Compression Latch Flush Silvers

  • 1.For electrical enclosures,and other compartments on your boat compression latch flush widely used by the major boat and yacht manufacturers.
  • 2.Material and Finish:zinc alloy, silvers plating and steel..
  • 3.Adjustable lever compression latch with raised trigger Compress lever pulls door tight.
  • 4. Applicable Door Thickness: 0.04"-0.94" Grip Range..
  • 5.Button to lock ,packaging 2PCS compression latch flush lock..
Check Stock