Top Pulse Tester Reviews

Dental Willis Bite Gauge Stainless Steel Premium Instruments

♥♥【Application】:The dental pulp vitality tester is an instrument that uses a machine to produce pulse current and stimulates the tooth nerve, then records the response value of the tooth nerve to the electrical stimulation, so as to judge the vitality of the tooth nerve,which ensure the accuracy of doctor's judgement on the patient's pulp vitality..
♥♥【Adjustable Frequency】:To press the speed control button to choose three preset speed mode (high-mid-low speed),while the different indicator lights will be on..
♥♥【Data description】：The maximum stimulus----80.Between 0-40, the patient feels ache and anesthesia, it is the alive teeth nerve.Between 40-80,with above-mentioned reaction,part of teeth nerve dead. 80, no above-mentioned reaction, dead teeth nerve..
♥♥【About Testing】:To increase a gentle pulsed stimulus at a rate,If the patient indicates perception, simply release the button. The stimulus stops immediately, but the numbers remain on the tester for about 3 minutes.It is easy to read..
♥♥【Economical】:This pulp tester is battery-operated, Standard 9-Volt batteries, the device turns itself off three minutes later after operation(No wasted batteries.).

Check Stock

QPKING Electric System Circuit Tester,Automotive Electrical System Tools,9V-30V Electrical System Diagnostic Tool With 2.4-inch LCD Display

[Multimeter Mode&Smart Test]: Electric System Tester is covered with comprehensive parameters of Multimeter, it can quickly test and automatically identified the Voltage, resistance, Positive and Negative poles of the tested component, which brings the user a lot of conveniences..
[Oscilloscope Mode&Relay Test]: Car Electric System Tester is not only able to display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc, but also can test the common automotive relay, like 5-terminal relays, and 4-terminal relays..
[Component Activation&Injector Mode]: It can generate "Active" signals for components, such as lights, motors, and other on-board electronic devices. Also different pulse signals can be output to the injector, which provides 4 pulse modes to better detect the condition of the injector..
[0-5V Power Supply&Voltage Alarm]: Capable of setting 0-5V output voltage, used to verify the wiring condition of the tested component. Equipped with voltage setting alarm. If a short circuit or fault causes the voltage to be greater than or less than the set value, the device will alarm..
[Multi-language Feature]: 14 languages supported, English, Spanish, German, Russian, Italian, Polish, Portuguese, French, Vietnamese, Malay....

Check Stock

ALLOSUN Electric Fence Tester Fault Finder Digital Electric Fence Voltage Tester Max 9.9kv, Blue (EM555)

MEASURE RANGE: LCD display screen indicates voltage levels from 0.3kv to 9.9kv.
POWER SAVING DESIGN: The electric fence tester will turn on at the detection of a pulse and turn off after about 4 seconds when no pulse is detected.
Test voltage levels on your fence line and fence controller.
Keep one on hand for regular fence line maintenance.

Check Stock

Pulse Oximeter - HOLFENRY Handheld Pulse Oximeter Fingertip oxygen meter finger pulse oximeter Fingertip with Pulse o2 sat monitor finger for oxygen SpO2 Pulse Oximeter portable oxygen machine Monitor

...ert - The handheld pulse oximeter will beep when it falls below the set threshold, or when the blood oxygen saturation is below 90%, or the heart rate is below 50bpm. The corresponding value will flash on the screen. This oxygen meter finger pulse oximeter will help you and your family to find out the status of the tester in time..
Multi-user management - Up to 10 IDs can be stored. Each user can store 300 sets of data. You and your family members can share an pulse oximeter fingertip..
No Need To Worry About Power - The blood oxygen monitor use USB-C to charge. After fully charged, the pulse ox can be used continuously for 18 hours. Charging method: ①put the oximeter finger with pulse into the charging base. ②Connect the charging base and the power supply with the USB-C cable. ③It is charging!.

Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....

Check Stock

Lightkeeper Pro Miniature Light Repairing Tool - Fixes Christmas Holiday light sets with a squeeze of the trigger- Includes 50 Spare Bulbs and a Battery Tester Which can be Used with C D AAA AA 9V N and Button Cell Batteries

BUNDLE INCLUDES: LightKeeper Pro Holiday and Christmas Tree Light Repair Tool, Holiday Battery Tester, and 50 Spare Bulbs.
3-WAY BULB PULLER: This Light Repair Tool helps release tight and stubborn bulbs from their sockets without any damage.
WORKING: The LightKeeper Pro Quick Fix Trigger sends a shaped, electrical pulse through the defective bulb, clearing the shunt. This forces the....
CONTINUITY/VOLTAGE DETECTOR: Each wall plug has a Hot, Neutral and Ground contact. Electricity is powered from the Hot contact and flows through the....
BATTERY TESTER: The included battery tester helps you to test out all C, D, AAA, AA, 9V, N and Button Cell Batteries.

Check Stock

ZTS MINI-9RL Multi-Battery Tester

Computes State of Charge (SOC) for more than 12 battery types.
Test battery condition - quickly and easily identifies weak or failing batteries.
Patented high accuracy Pulse Load test - battery safe, non-invasive.

Check Stock

Giorgio Armani Aqua di Gio Profumo, 4.2 Fluid Ounce

Apply on pulse point: wrist, inner elbow and neck.

Check Stock

Power Probe PP401AMZ01 Red IV with Connector Kit

Supplies power and ground for functional component testing.
Digital volt and Ohmeter for circuit testing.
Large Color LCD screen with easy to Navigate user menu.
Ac-rms, AC peak to peak, frequency and pulse width for signal testing.
Fuel injector tester for easy circuit diagnosis.

Check Stock

Ultrasonic Fuel Injector Cleaner Machine & Fuel Tester 4 Cylinders 110V, CATUDIY Fuel Injector Cleaner Tool for Diesel Fuel System Cleaner Diagnostic Tester for Motorcycle Automotive Gasoline Test Kit

...ltrasonic Cleaner & Simulating Testing】The injector cleaner machine is a mechatronics automotive tool that combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning & detection technology. To simulate various realistic operating conditions of the engine, This fuel tester cleans and detects the fuel injectors of various automobiles and motorcycles.
【Heated & Reusable & Effective】The fuel injector tester improves a lot of cleaning effect by heating reusable and recyclable cleaning fluid, which is money saving and eco-friendly. With 1.3L large capacity ultra cleaning tank, to perform ultrasonic cleaning on single / multiple injectors simultaneously, the auto cleaner can eliminate thoroughly blockages on the injector accessories and internal parts.
【Portable & Humanized Design】The mini ultrasonic cleaner only weighs 8kg, easy to carry. Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value.

Check Stock

SDI Pulse Load Battery Tester, 12inH x 10inL

Price For: Each Standards: UL/ULC Power Source: (4) AA Batteries Manufacturers Warranty Length: 1 yr. For Use With: Residential or Commercial Detectors Height: 12" Length: 10" Provides: Tests State of Charge and Battery Condition for 2V, 4V, 6V, 8V and 12V Lead Acid Battery Types (SLA, AGM, Gel, Wet) Item: Pulse Load Battery Tester Width: 8".
Country of Origin (subject to change): United States.

Check Stock

Battery Saver 2365-48-LCD 48V 50W Quick Charger Tester and Auto Pulse Maintainer Yellow

Quickly Charges! Perfect for Odd Voltage Battery Systems.
Great for Long Term Maintaining of Vehicles In The Off Season!.
PULSE Cleaning Mode Improves Battery Condition with Continued Use.
Automatically Works with Designated Lead Acid Battery Voltages.

Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.

Check Stock