Top Pulley Magnet Clutch Reviews

The ROP Shop 2496 | PTO Clutch CCW for Husqvarna 179335, 414737, 532179335, 532414737 Lawn Mower

  • The ROP Shop replacement PTO Clutch CCW for Husqvarna 179335, 414737, 532179335, 532414737 Lawn Mower.
  • Specs - Crankshaft: 1 1/8". Pulley Outside Diameter: 6 1/8". Direction: Counter Clockwise (CCW). Belt: 1/2" or 5/8". Refer to images 2 & 3 for more information.
  • Includes - (1) PTO Clutch & (1) Installation Manual.
  • Features - Heavy Duty "FatBoy Series" Upgrade. High Torque Cool Coil Upgrade. Integrated Water Tight Wire Harness. Replaceable Pulley Bearing. Super Smooth "Xtreme Precision" Machined Pulley.
  • To prevent premature clutch failure, follow the instructions included with the clutch.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

AC Compressor for Thermo King Tripac APU 75R86132Q

  • Pulley Type: Poly 8 Pulley Diameter: 123 mm.
Check Stock

AlveyTech Complete Clutch Assembly 50cc 4 Stroke GY6 QMB139 Engines

  • A complete clutch assembly for the Baja Retro 50 (RT50) or Baja Sun City (SC50S - VIN number LWGT) scooters..
  • Complete Clutch Set for 50cc 4 Stroke engine vehicles..
  • Will fit most 50cc chinese scooters as well..
  • This pulley assembly, (aka driver pulley or variator) comes complete as shown in the photos..
Check Stock

Glixal High Performance Racing Clutch Assy with Clutch Bell for GY6 49cc 50cc 139QMA 139QMB Engine Scooter Moped ATV Go-Kart

  • Assembly Comes with 2000RPM Clutch Springs.
  • ID of bearing in clutch shoe assy: 12mm (6901RS).
  • Please Note: The exact performance of upgrade parts will be affected by many other factor.
Check Stock

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

  • The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
  • Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
  • Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
  • Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
  • For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.
Check Stock

KENDA Juggernaut Tire 26 x4.00 Wire Clincher DTC 60TPI Black

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock

Snapper 7034604YP Clutch Control 21

  • Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Specs: Description: PTO Clutch, Crankshaft: 1.000, Pulley: 5.41.
Check Stock

Maryland International Part 1

  • Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 4 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness - with Xtreme's "Integrated Diode".
  • Specs: Description: PTO Clutch, 1.125" Crankshaft, 6.3" Pulley, Counter Clockwise, A/B Belt, 200 ft. lbs. torque.
  • Replaces OEM Numbers: Bad Boy: 070-1000-00, Stens: 255-775.
Check Stock

Polaris Snowmobile Quick Drive Belt Kit, Part 2206046

  • The ROP Shop replacement 103 HPQ Drive Clutch.
  • Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
  • This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
  • This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck

  • PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
  • BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
  • WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
  • WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check Stock