Top Ptfe Work Wear Reviews

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock

SIQUK 2 Pcs PTFE Teflon Tube 2M 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

  • CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

Cals tan Drag and Reel Grease 1oz

  • 1 OUNCE PURPLE: Cal's Thinner Purple Universal Reel and Star Drag grease is the result of decades of hands-on fishing and reel customizing experience combined with ultra-modern lubrication technology, including PTFE and polymers.
  • Maximum corrosion protection, Incredible salt-water corrosion protection on all metals, including aluminum, steel, and brass.
  • Superior heat and wear resistance, Safe for all metals and common plastics.
  • Reduces gear train friction for easier cranking.
  • 1 OUNCE of Cal's Universal Reel and Drag Grease.
Check Stock

Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
  • The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
  • Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check Stock

Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB - USAlab

  • ● This platinum plate electrode is widely used in electrochemical study. It is an important accessary for electrochemical work-station and three-electrode cell. Besides, the platinum electrode is also used as insoluble anode in electrolysis process..
  • ● The electrode is coated with PTFE (polytetrafluoroethylene), and the size of PTFE is 80mm × φ6.4mm. The terminal is gold-plated copper rod (15mm × φ2mm)..
Check Stock

Slick 50 Original Classic Engine Treatment with Ceramic Cerflon PTFE, SL-750017, 32 fl. oz, 1 Pack, White

  • Protects against power robbing friction and heat.
  • Use every oil change for maximum effectiveness.
  • Lubricity of PTFE but with Ceramic Technology which means the best wear protection and the best thermal stability – Better than PTFE alone.
Check Stock

Slip 2000 EWG 4oz.

  • Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
  • Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
  • Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
  • Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stock

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M, PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Vyper/Voxelab Aquila

  • 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
  • 2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
  • 2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours..
Check Stock

PTFE Magnetic Stirrer Mixer Stir Bar, White Color, Stir Rod Magnetic, Laboratory Bar, Stir Plate Bar, Stir Plate Magnet Stick (8 Pieces,30 mm/ 1.18 Inch)

  • Features: magnetic stir bar can resist high temperatures, corrosion, abrasion and high rotational forces, and has the properties of fine workmanship, no impurities and burrs on the surface, stable speed and no deviation.
  • Quality material: PTFE magnetic stirrer is made of PTFE and quality magnetic steel, and the cylindrical shape and smooth surface will reduce friction and improve smooth rotation.
  • More other applications: laboratory bar is widely applied in scientific research, universities, laboratories in the industrial and agricultural sectors, and also can be applied to stir mixed substances.
  • Widely applicable: stir plate magnet bar will work well with various types of magnetic stirrers or heating stirrers.
  • Package includes: comes with PTFE magnetic stir bars in our package, all of them are 30 mm/ 1.18 inch.
Check Stock

INTLLAB 7pcs/Pack Mixed Size PTFE Magnetic Stirrer Mixer Stir Bars Type-C

  • ✔ CHEMICAL RESISTANT - Teflon PTFE material can be used with corrosive chemicals, including acid and base.
  • ✔ POWERFUL - Teflon (PTFE) casing helps reduce friction and wear while spinning.
  • ✔ EASY USE - Place inside a container of liquid that is seated on a magnetic stirrer.
  • ✔ PORTABLE FOR WIDE USE: perfect for stir a liquid or solution in scientific research, industry, agriculture, health and medicine, homebrew, etc.
  • ✔ 100% MONEY BACK GUARANTEE - We want you to be 100% Satisfied with your purchase. Absolutely no risk. Give our product a try by ordering today..
Check Stock