Top Ptfe Tube 75mm Reviews

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • ...s tubing has the lowest friction than other ordinary bowden tube. More responsiveness, less retraction, more accurate prints, less slippage, wear,and tear on the extruder, and less clogging when printing chunky filaments..
  • Higher Temperature ResistanceHigh Temperature Resistance due to using only the highest quality PTFE. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion..
  • 4 Pcs Upgraded Bed-Level SpringsThe die springs are stiffer than ordinary spring, making bed levelling easier and stronger than the stock ones, and help your 3D printer much more stable while printing. If you have any questions and concern, please feel free to contact with us. Our....
Check Stock

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

  • Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
  • The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
  • Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

  • Package Content : 1pc PTFE Teflon Bowden Tube.
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ...ocked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile....
Check Stock

Aokin 10 Pcs PC4-M6 Pneumatic Fitting and 10 Pcs PC4-M10 Pneumatic Fitting for Creality Ender 3/3 Pro/3 V2 Ender 5/5 Pro/5 Plus CR-10/10S etc

  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
  • Easy to Install: the extruder fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube and....
  • PC4-M6 fitting: copper and plastic material, durable and sturdy.
  • Thread: 6 mm, inner diameter(blue end): 4mm, fit for the tube whose outer diameter is....
  • PC4-M10 fitting: stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness.
  • Thread: 10 mm, inner diameter(black end):....
  • Aokin 3D Printer accessories use high-quality raw materials and fine workmanship, If you have any questions about our product, please feel free to....
Check Stock