Top Ptfe Rod Production Line Reviews

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

Check Stock

EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black(5/16 Inch ID)

ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase!.
PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc..
Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 3000 psi. Bursting Pressure: 10000psi..
Applicable Medium: all automotive fuels, lubricants, and coolants..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock

EVIL ENERGY 8AN PTFE E85 Fuel Line Hose Nylon Braided 20FT Black(0.394 Inch ID)

ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase!.
PTFE fuel line can be used as fuel injection hose, boost line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, fuel supply line, etc..
Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2500 psi. Bursting Pressure: 8000psi..
Applicable Medium: all automotive fuels, lubricants, and coolants..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock

EVIL ENERGY 8AN PTFE Fuel Line Kit,AN8 E85 Nylon Braided Fuel Hose 16FT(0.394Inch ID)

ID: 13/32". OD: 0.543inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.).
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications..
Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants..
-8 ptfe nylon braided fuel line relatively hard,it can't be bend and folding in half. Professional installation is highly recommended..
EVIL ENERGY provide 8an PTFE fuel hose fitting kit 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

(400MM) / 15.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..

Check Stock

(450MM) / 17.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..

Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Check Stock