Top Ptfe Plastic Reviews

Slip 2000 Gun Lube 4oz Pump

Long-lasting lubrication: Slip2000 gun lubricant penetrates into the smallest, tightest areas that regular oils cannot usually reach. This allows it to replenish the lubricant that has been lost, providing a long-lasting protective coating that reduces F.
PROTECTION FROM CORROSION: Slip 2000 Gun Lubricant's unique formulation provides a long-lasting barrier on all metal parts that protects against corrosion and that will not attract dust, dirt, or other abrasive contaminants..
NO SILICONE OR PTFE INGREDIENTS: Slip 2000 Gun Lube does not contain any silicone or PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
Reduce cleanup time by 50%: Slip2000 gun lube does not stick to carbon, Copper, lead, or plastic and will reduce cleanup time by 50%!.
Non-toxic and non-hazardous: Slip2000 gun lube is non-toxic and non-hazardous. All Slip2000 products are developed with your health and safety in mind!.

Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

Package Content : 1pc PTFE Teflon Bowden Tube.

Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
Size: 3x4mm (IDxOD), Fit for 3mm filament.
Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..

Check Stock

Loctite 2087067 567 Thread Sealant 50 mL Tube, White

MULTI-PURPOSE WHITE PTFE THREAD SEALANT: Uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections.
SOFT SET WITH NO CURE TIME: Forms leak-free joints that can be tested and put into service immediately with no cure time required, and it holds tight against expansion, vibration, and contraction.
HEAVY DUTY: Withstands temperatures from -200 degrees Fahrenheit to 500 degrees Fahrenheit, and it has a maximum working hydraulic pressure of 12,000 PSI.
COMPATIBILITY: Can be used on all metal, PVC, ABS, and CPVC plastic lines carrying water, steam, caustics, and dilute acids, and it is suitable for use with all liquids and gases except for oxygen.
EASY TO APPLY: Brushable and non-separating for easy application, and it will not run or drip from joints.

Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..

Check Stock

Slip 2000 EWG 4oz.

Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.

Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

...e filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufacturers..
2 complimentary hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
F1rst Layer is proud to provide 24/7 customer support and we strive to achieve 100% customer satisfaction. If you have any questions or concerns about this product, please do not hesitate to contact us directly and we will assist with any and all questions..

Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
Convenient to Use: the thread seal tapes are convenient to use.
Just clean the 2 threaded connections that need to be sealed.
Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
If the thread sealing is not good, you can increase the thickness of the tape.

Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock