Top Ptfe Material Reviews

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....

Check Stock

Assigned by Sterling Seal & Supply, (STCC) 7530.0312.12x12.DSC White Virgin Teflon Sheet, 12\ x 12\ Square, 1/32\ Thick by Sterling Seal & Supply (STCC) (Qty 1 Sheet) - DSC

Do it your self (diy) material - this product is great for your home and workplace projects. Sands, drills, cuts with razor blade or scissors & very machineable.
Possible applications - projects like spacers, heat shields, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use ptfe sheet for making seals, washers and insulators. Ptfe is very useful & durable as a low-friction dry bearing surface material. Ptfe is both high impact and tearing resistant.
Teflon material supplied by sterling seal & supply has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability.
Ptfe is unaffected by most corrosive liquids, vapors and gases, and conforms to both fda and ams specifications.

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock

Sterling Seal SSI7530.SM2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/64\

DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.

Check Stock

Sterling Seal SSI7530.SMMD2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/32\

DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.

Check Stock

(400MM) / 15.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..

Check Stock

(450MM) / 17.7 Inches PTFE Coated Stainless Steel Electric Overhead Stirrer Mixer Shaft w/Foldable Paddle Blade Stirring Rod Lab Utensils Supplies (7mm Diameter)

PTFE stirring rod for laboratory use with high quality and stable performance, made of high quality PTFE material, providing low coefficient of friction..
It features high temperature resistant, corrosion resistant and no deformation, it also has chemical resistance along with a service operating temperature of ±500F..
Perfect for stirring solution in scientific research, biochemical laboratory, health and medicine..
PTFE Stirrer Mixer shaft with foldable paddles, stirring rods for science lab experiment equipment..
Stiring rods - coated in white PTFE，anti-corrosion, acid & alkali resistance, high temperature resistance..

Check Stock

Bilway 3D Printer Ender 3 v2 Printer Creality Ender 3 v2 3D Printer with Silent Mainboard Meanwell Power Glass Bed and Resume Printing 220x220x250mm Ideal for Beginners

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more....
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly....

Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
Size: 3x4mm (IDxOD), Fit for 3mm filament.
Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..

Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..

Check Stock

Environmental Express Air Sampling Hydrophobic-PTFE Filters, 25 mm, 1.0 µm; 100/Pk

Description: Air Sampling Hydrophobic-PTFE Filters, 25 mm, 1.0 µm.

Check Stock

VEVOR Jacketed Reactor 5L Laboratory Glass Reactor, Jacketed Glass Reactor, Chemical Reaction Vessel, Lab Jacketed Reactor, Reaction Vessel Chemistry, with Digital Display, for Reaction Distillation

Premium Material: Borosilicate glass (GG17 material) has excellent physical properties and chemical properties. The overall national standard stainless steel new frame structure, compact and sturdy..
Precise Digital Screens: LCD makes temperature measurement easier and more convenient.
temperature range: -60 °C-200 °C, resistant to strong acid and alkali, high-temperature resistance, high strength, high hardness。.
Variable Speed Motor: Lab reaction vessel adopts variable speed motor, which has long-running time, excellent stability, no noise, standard gear, no gap, wear-resistant.
PTFE Component Seal: The PTFE component seal is durable and air-tight, with an abrasive dust collection box. The PTFE discharge valve is designed with a large bottle of mouth, which is easy to clean and disassemble. Solid/liquid substances are easily released from the bottom..
Widely Used: The 5 liter reaction vessel can be safely operated under a full vacuum. Jacketed glass reactor systems are ideal equipment for mixing, reaction, and distillation in the chemical and pharmaceutical industries..

Check Stock