Top Ptfe Material Compound Reviews

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
Please check if this size is what you need..

Check Stock

PEAK Silicone Plus Windshield Wiper Blade, 26-Inch (Pack of 1)

LASTS 4X LONGER than the required industry standard for traditional blades providing 2 Million problem-free wipes.
ADVANCED SILICONE TECHNOLOGY: Delivers a special water repellent coating for complete visibility.
TRI-LAYER WIPING ELEMENT TECHNOLOGY: Infused Water Repellant Silicone Compound lasts 4x longer*. Advanced nano-graphite + PTFE + MoS2 coating for maximum durability & smooth glide. Water Repellent Formula coats windshield, shedding rain & winter road spray.
UNIVERSAL ADAPTER SYSTEM: Fits most blade arms for quick & easy installation.
TO ACTIVATE WATER REPELLENCY: Run wipers at medium speed on a clean, dry windshield for 3-5 minutes. Spray washer fluid and allow blades to clear windshield..

Check Stock

SimPure Syringe Filter PTFE Hydrophobic Membrane 100 PCS 0.22um Pore Size 13mm Disc Diameter HPLC and GC Needle Filter Non-Sterile High Throughput Lab Filtration Barreled Packed

✅Hydrophobic PTFE Membrane - The PTFE needle filter material is a PTFE membrane, with the naturally hydrophobic, it with broad chemical compatibility and strong chemical stability and inertia, strong hydrophobicity..
✅Uniform Pore Size - 13mm disc diameter, 0.22μm, pore size, 100 pcs barreled packed. The PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
✅ High-Quality - ISO 9001 certificated, ensuring the quality of the filter from the first inspection, mid-control inspection, patrol inspection, and warehouse inspection..
✅Non-Sterile Syringe Filters - PTFE syringe filters housing is made of premium polypropylene(PP) material with a unique threaded interface (Luer lock) design, non-sterile, no adhesive, and no contamination of the sample. It can be autoclaved and sterilized at 121°C/249.8℉ for 30 minutes..
✅Various Applications - The PTFE needle syringe filters are broadly used for infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. Also, the Luer lock filter is suitable for gas filtration..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

...age Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....

Check Stock

Assigned by Sterling Seal & Supply, (STCC) 7530.0312.12x12.DSC White Virgin Teflon Sheet, 12\ x 12\ Square, 1/32\ Thick by Sterling Seal & Supply (STCC) (Qty 1 Sheet) - DSC

Do it your self (diy) material - this product is great for your home and workplace projects. Sands, drills, cuts with razor blade or scissors & very machineable.
Possible applications - projects like spacers, heat shields, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use ptfe sheet for making seals, washers and insulators. Ptfe is very useful & durable as a low-friction dry bearing surface material. Ptfe is both high impact and tearing resistant.
Teflon material supplied by sterling seal & supply has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability.
Ptfe is unaffected by most corrosive liquids, vapors and gases, and conforms to both fda and ams specifications.

Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....

Check Stock

Sterling Seal SSI7530.SM2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/64\

DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.

Check Stock

Sterling Seal SSI7530.SMMD2.6 PTFE Virgin Teflon Gasket Material Pack, 6\ x 6\ square, 2 thicknesses - 1/32\

DO IT YOUR SELF (DIY) MATERIAL - This product is great for your home and workplace projects. Sands, Drills, Cuts with razor or saw & Very Machine able.
POSSIBLE APPLICATIONS - Arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation.
Use PTFE Sheet for making seals, washers and insulators. PTFE is very useful & durable as a low-friction dry bearing surface and is great as a Drum bearing material for dryers.
Sterling Seal & Supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability. PTFE is both high impact and tearing resistant.
PTFE is unaffected by most corrosive liquids, vapors and gases, and conforms to both FDA and AMS specifications. Contact with food, beverages, cosmetic and pharmaceutical products are suitable.

Check Stock

Vbestlife Black Durable Archery Handle Thumb Caliper Bow Release Grip for Compound Bow Archery Release Aid Archery Thumb Release

...trigger Rugged composite construction, hand held, small hole in the bottom allows you to add a wrist strap..
️【Easy to Use】Compound bow trigger Easy to use trigger for quick release hunting or target practice..
️ 【Feature】Compound bow release Molded handle with rubberized grip surface..
️ 【High Quality Material】Compound bow release trigger made of high quality material Rubber + Alloy.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
️【Suitable for】360 degree swivel mounted caliper head. Hand holded compound bow release is suitable for compound bows..

Check Stock

CMT 219.090.12 Industrial Sliding Compound Miter & Radial Saw Blade, 12-Inch x 90 Teeth 4/30° ATB+1TCG Grind with 1-Inch Bore, PTFE Coating

For fine finish crosscuts. The 5° negative hook limits splintering and "climbing"..
Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates..
0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind..
Micrograin carbide teeth to last longer and deliver smooth cuts..
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..

Check Stock

CMT 219.080.10 Industrial Sliding Compound Miter & Radial Saw Blade, 10-Inch x 80 Teeth 4/30° ATB+1TCG Grind with 5/8-Inch Bore, PTFE Coating

For fine finish crosscuts. The 5° negative hook limits splintering and "climbing"..
Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates..
0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind..
Micrograin carbide teeth to last longer and deliver smooth cuts..
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..

Check Stock