Top Ptfe Lined Valves Reviews

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

  • CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
  • INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
  • INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
  • NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
  • MADE IN USA with high quality components and assembly.
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Hourleey Brass Garden Hose Splitter (4 Way), Solid Brass Hose Connector 3/4\

  • Solid Brass: 100% solid brass make the 4 way splitter durable, heavy duty brass hose connecter support up to 0.8 MPa water pressure.
  • Durable: 100% solidbrass valves makes Hourleey 4 way splitter more durable than plastic valves, no leaking, standard 3/4 In. connection, fit most all standard hoses..
  • Dividually controlled: All the hose connector can be turned on and off individually, you can use one or others according to your need, greatly enhance the user convenience with freely switch..
  • Package include: 4-way solid brass splitter, 4 installed washers with extra 4 more washers, and 1 pack PTFE tape..
  • Tips: If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND.
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ...bility, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check Stock

Lifynste 4 Way Brass Hose Splitter, 3/4\ Heavy-Duty Brass Garden Hose Splitter, Garden Hose Adapter Connector

  • HIGH QUALITY MATERIAL: The brass hose splitter is made of 100% solid brass, solid and durable, corrosion proof and has a long service time..
  • COMPLETELY LEAK-TIGHT: Garden hose connector are equipped with high quality ball valves for tight closure. Garden hose separator effectively prevents any leakage or dripping..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose splitter is designed to easily accommodate all standard hoses, connects two hoses to one faucet and very convenient for you to control the work in different places at the same time..
  • INDIVIDUALLY CONTROLLED: This handy hose splitter includes 4 shut-off valves, ideal for 1 to 4 sprinkler hose faucet valves and enabling multi-tasking. You can use one or others according to your need, giving you the perfect flow for watering plants, flowerbeds, lawns, vegetable and washing your car, or cleaning your pets..
  • PACKAGE INCLUDES: The 4 way hose splitter comes with 4 pcs free rubber gaskets for replacement, and 1 PTFE pipe seal tape for easy and convenient connecting. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

Mann-Filter W 719/45 Spin-on Oil Filter

  • Silicone anti-drain back valve and PTFE-coated bypass valves.
  • Built tough for the needs of the high-output engines found in many European luxury and performance vehicles.
Check Stock

ZAITOE Magic LUBE Teflon Lubricant Swimming Pool O-Ring Gasket LUBE Grease 631 5 oz 1

  • SUPERIOR lubricant for pool/spa equipment including O-rings, gaskets, chlorinators, valves, etc..
  • FORMULA: Premium, synthetic lube with PTFE. Waterproof, non-toxic, odorless. Won’t drip or dry out..
  • COMPATIBLE with most plastics, metals, rubber, etc..
  • MULTIPURPOSE for use around the house: squeaks, autos, RV's, boats, plumbing, hobbies, etc..
Check Stock

Palmetto 1347AF Series Synthetic with PTFE & Lube Compression Packing Seal, White, 3/8\ Square, 10' Length

  • Compression packing seal protects pumps and valves from fluid leaks in general service applications.
  • PTFE-impregnated acrylic yarn resists wear and prevents corrosion from harsh chemicals.
  • Petroleum-based break-in lubricant extends packing life by reducing break-in time and frictional heat.
  • Operating temperatures range from -10 to 450 degrees F (-23 to 232 degrees C).
Check Stock

Arashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016

  • -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
  • PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
  • PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
  • has a heat range of 158 degree F to 500 degree F.
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check Stock

Krytox by Chemours Krytox GPL206 Grease 0.5 kg/1.1 lb Jar D10170735

  • A high performance grease utilizing PFPE oil and thickened with PTFE powder.
  • Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals,....
  • GPL 206 has a base oil viscosity of 243 cSt @ 40 deg C and is suitable to use in applications up to 500 degrees F.
  • Chemically inert: resistant to oxygen and inert to most all chemicals.
  • inert nature allows krytox grease to outlast/outperform hydrocarbon products.
  • Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....
Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

  • 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
  • Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

American Valve P200 1 1/4 PVC Ball Valve IPS Schedule 40 1-1/4-Inch White

  • Full Port: Double union/double slip ball valve block design permits in-line maintenance without disconnecting the pipe—full flow fluid handling....
  • Ease Of Use: PVC backwater valve with a quarter-turn operation for durable, superior performance in the field. Quick and easy disassembly without....
  • Construction: Ball valve with female socket dimensions comply with ASTM F1498, EPDM O-rings and PTFE seats for long-lasting, superior performance..
  • Applications: True union ball valve can be used in water treatment, water features, fountains, aquariums, landfills, swimming pool as pool valves,....
  • 100% Satisfaction Guarantee: If you are not satisfied, we offer a 30-day hassle-free return policy. No restocking charges, no hassle! We assure you....
Check Stock

6ml High Density Polyethylene Vial, Push-On Caps, Bulk Packed, 2000 per Case

  • Full height partitions minimize breakage.
  • Measures 28mm outside diameter by 57mm height.
Check Stock