Top Ptfe Electronic Parts Reviews

Slip 2000 - Extreme Weapons Grease Syringe (EWG), 1 Fluid Ounce / 30 Milliliters

  • Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
  • Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
  • Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
  • Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

  • Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
  • Size: 3x4mm (IDxOD), Fit for 3mm filament.
  • Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
  • Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
  • Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

Arashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016

  • -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
  • PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
  • PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
  • has a heat range of 158 degree F to 500 degree F.
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check Stock

KOOKYE Robot Tank Car Kit Tank Chassis Platform Metal Stainless Steel 2DW Motor for Arduino / Raspberry Pi DIY (Silver Tank Chassis)

  • The KOOKYE robot tank platform is designed for learning robotics electronic car with arduino or raspberry pi programming. You can add robotic arm or robotics HD Camera on this robotic car platform for DIY..
  • The robotic tank car chassis contain extra-large size stainless steel car body and a variety of subplates for DIY. With 1 pairs drving wheels and 5 pairs carrying wheels, it make walk more easily on complex ground conditions..
  • This product only contains tank chassis.If you are an intermediate player and have time to read our code comments,you can buy the robotic car chassis platform andour tank electronic parts kit,then you can easily customize this robotic tank car to make your own project for science fair, college home work or even commercial applications..
  • The tank car chassis kit and the electronic parts kit can be purchase separately for your DIY.The electronic parts kit contains module parts including: Ultrasonic Sensor module, Tracking module, Infrared Remote Control, Bluetooth module and WiFi Expansion board etc. With these modules, the robot car can work in multiple modes such as auto-go, infrared control, obstacle avoidance, line tracking. You can use our Android APP to change working mode through Wifi or Bluetooth..
Check Stock

HRX Package 20pcs Large Premium Anti Static Bags with Antistatic Sticker, 12 X 16 inches Open Top ESD Shielding Anti-Static Bag for Motherboard SSD HDD Laptop Electronic Components

  • ★ The Anti-static reusable bags are made of Quality LDPE ( low-density polyethylene ) which is not only Chemical Stability,Flexible and Sturdy, but also Non-toxic and free from extraneous odor, it guard PC parts and electronics from ESD effectively.
  • ★ The large Anti Static Bags is approx 12x16 inch ,it can store almost All Electronic Components, Laptop PC parts, static-sensitive electronic parts like HDD hard drives, motherboard video cards, RAMs, Processor, I/O cards, etc. Ideal for intercompany transfers, storing and shipping.
  • ★ Package includes 20 PCS reusable top open design anti static bags and 20 PCS Self adhesive ESD shielding anti static sign stickers to seal up the bags.
  • ★ 4.6 mil Thickness SEMI-TRANSPARENT Plastic Static Free Bag is thick but also can easily see what's inside the bag.
  • ★ The Anti-static bags is totally a no-brainer necessity for protecting your more valuable electronic goods such as hardware, arcade boards, large graphics card, electronic components, PC parts, laptop components, LED light bar PCB and more.
Check Stock

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock

Daarcin Open Top Antistatic Bag,10pcs 12X16in/30x40cm Large ESD Anti Static Bags for Motherboard Video Card LCD Screen with Anti-Static Labels

  • Items:Include 10pcs Premium Open Top Large Antistatic Bag 12X16in/30x40cm and 10pcs Anti-static Labels,which can be Used to Store Your Large Electronic Parts.
  • High temperature resistance: it is made from high quality Polyethylene Terephthalate (PET) with an aluminized film, high temperature resistance, non-toxic and eco-friendly, no odor.
  • Multi-use:Motherboard and other big size electronic parts such as LCD Screens,Video Card,Sensitive Electronic Components,Hard Disks, RAMs, Processor, I/O cards, etc.
  • Translucent bag: easy to see the items inside, ideal for store electronic parts, such as Motherboard, Video Card, ect.. We also attach matching antistatic lables for better use.
  • Warm Tips:Please note that this product doesn't have zip lock design, Please make sure you choose the right size.
Check Stock

For Redcat Blackout Parts Turnbuckle Redcat Blackout Xte Pro Parts 2X Machined Alloy Tie Rod red

  • ✔Replacement of redcat Blackout Parts# BS213-016.
  • ✔Full redcat blackout xte pro parts set turnbuckles.
  • ✔Compatible with Brand name Redcat, BSD Racing Item: RedCat BlackoutSC short-course, XTE Monster Truck, XBE Buggy, BSD Racing monster truck.
  • ✔Hard-anodized colour,CNC machined PTFE-coated hardened alloy 6061-T6 The lightweight aluminum alloy material is durable and improves the overall....
Check Stock

Lg EBR76542931 Dryer Electronic Control Board Assembly Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • Electronic control board assembly EBR76542931 manages the functions of the dryer such as drying time and temperature.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Lg.
  • This electronic control board assembly (part number EBR76542931) is for dryers.
  • refer to you parts diagram for a complete list of parts included.
Check Stock

Snap Circuits Extreme Electronics Exploration Kit SC-750R & Jr SC-100 Electronics Exploration Kit for Age 8+ STEM

  • Product 1: Build Over 750 Experiments With 80 Parts.
  • Product 1: Toy Industry Association - Specialty Toy Of The Year, Dr. Toy 100 Best Children's Products, Dr. Toy 10 Best Educational Products.
  • Product 1: Parts Included: Photoresist Or, Power Amplifier, Variable Capacitor, Analog Meter, Solar Cell, Computer Interface, Full Color Manuals.
  • Product 1: Includes Snap case 7 Heavy Duty Plastic Case With Custom Foam Inserts For Housing Your Snap Circuits Parts.
  • Product 2: With this building toy, young engineers can assemble over 100 different electronic circuit projects with just 30+ electronic parts..
Check Stock

Snap Circuits Beginner Electronics Exploration Kit Stem Kit for Ages 5-9 SCB-20 & Elenco Jr SC-100

  • Product 1: Snap circuit’s beginner has 14 parts to build over 20 projects..
  • Product 1: These STEM activities are a wonderful introduction to problem solving, following directions, and the satisfaction of a job well done..
  • Product 1: The color manual makes it easy-to-follow for all builders..
  • Product 1: One of the award winning Snap Circuits line of electronic exploration kits..
  • Product 2: With this building toy, young engineers can assemble over 100 different electronic circuit projects with just 30+ electronic parts..
Check Stock