Polyken NAT236 Multi-Purpose Double Coated Carpet Tape, 36 yards Length x 2\ Width, Natural
- Release Liner: low-density polyethylene (LDPE) film.
- Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Top Ptfe Adhesive Release Liner Reviews
Polyken 105C/NAT136 105C Multi-Purpose Double Coated Carpet Tape 1 x 36 yd Natural
- Release Liner: low-density polyethylene (LDPE) film.
- Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black
- 3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
- Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
- Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
- Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
- Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
- Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..
Polyken 105C-P/NAT225 105C-P Multi-Purpose Double Coated Carpet Tape Paper Liner 2 x 75 ft Natural
- Release Liner: low-density polyethylene (LDPE) film.
- Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
JVCC FELT-09 Polyester Felt Tape [4mm thickness felt] 1 in x 10 ft Black
- JVCC FELT-09 Polyester Felt Tape is a 4mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has....
- On many of the adhesive felt products the rolls will have an approximately 2-inch to 4-inch leader of double-sided film tape applied to the release....
- It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you....
- Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-09 hides seams being....
- Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
ISC Racers Tape HT1614 ISC Helicopter-OG-HD Surface Guard Tape: 1" x 60 ft, Transparent
- ...de: Body panels on race cars. Bicycle frames. Skis. Kayaks. Surfboards. Ground effects. Bumpers. Tailgates. Top fuel wings. Trailer walls. Rail protection on stand-up paddle boards (SUPs). Any painted or unpainted surface that is prone to weathering, chipping or scratching. Etc..
- Carrier/Backing: polyurethane film. Adhesive: acrylic. Release Liner: 92 lb. polycoated white paper. Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier) 4.7 mils (liner)..
- Adhesion: 110 ounces per inch (to stainless steel test panel). Tensile Strength: 80 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 275F. Application Temperature: 50F (minimum). Elongation: 500%. Core: 3-inch diameter..
Jaybird and Mais MOLESKIN Moleskin Roll: 2 in. x 1 yds. (Tan)
- Jaybird & Mais Moleskin Roll is widely used to help with blister recovery and to protect against high friction areas. It's made from softly brushed, extremely strong napped cotton sateen fabric that is coated with latex-free zinc oxide adhesive..
- This soft material protects sensitive areas. Since the tape has high tensile strength, it can be effectively use as ankle stirrups. It can be used along with foam tape to keep securely in place and prevent from sticking or shredding in shoes or socks..
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered)..
- Adhesive: latex-free zinc oxide. Carrier/Backing: cotton sateen cloth fabric..
- Release Liner: paper. Thickness: 35 mils (carrier, adhesive, liner) 29.5 mils (carrier, adhesive) 5.5 mils (liner). Made in the USA..
3M RP25/GRY055 Scotch RP25 VHB Tape: 1/2" x 15 ft.
- Carrier/backing: closed-cell acrylic foam (conformable). adhesive: multi-purpose acrylic.
- Adhesion: 272 ounces per inch (to stainless steel test panel). tensile strength: 90 pounds per inch (longitudinal). thickness: 25 mils (carrier, adhesive).
- Service/operating temperature: up to 200F. Short term temperature resistance: up to 250F. Application temperature: 60F to 100F.
- Density: 45 pounds per cubic foot. Dynamic overlap shear: 80 pounds per square inch.
- Release liner: red film (1/2 inch wide), white paper (3/4 and 1 wide).
- Please note that 3M supplies RP25 1/2-inch on a white liner or a red liner. The product is the same for both liner colors.
JVCC FELT-08 Polyester Felt Tape [3mm thickness felt]: 3/4 in. x 10 ft. (Black)
- JVCC FELT-08 Polyester Felt Tape is a 3mm thick synthetic needle punched felt made from polyester fibers..
- One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops..
- Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries..
- JVCC FELT-08 hides seams being photographed and is used for applying a clean, dark edge to platforms, flats, and portals. Can also be used to create matte borders or edges and to line display and jewelry cases..
- Carrier/Backing: polyester felt. Adhesive: synthetic rubber. Release Liner: paper (reverse wound). Thickness: 128 mils (carrier, adhesive, liner) 118 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel). Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum). Core: 3-inch diameter..
3M 9425/TRL0572 Scotch 9425 Removable Repositionable Tape: 1/2" x 72 yd, Translucent
- 3M 9425 Removable Repositionable Tape is a translucent UPVC film differentially coated with a removable/repositionable, medium tack, adhesive on one side (back/liner side) and a permanent, high tack, adhesive on the other (face/exposed side). Industries 3M 9425 is used in includes electronics.
- The medium-tack adhesive allows removal from many foils and films without adhesive residue. In many cases, the tape can be reused numerous times. The user should perform specific tests to determine the product’s suitability for the particular application..
- The UPVC film carrier on the tape provides differential stability which offers improved handling for laminating and die-cutting. 3M 9425 is used for repositioning or multiple openings and closings and works on a variety of substrates or materials for temporary adhering, affixing, mounting, holding, attaching, and positioning of lightweight materials such as paper, photographic paper, plastics, films, foams, and cardboard..
- Carrier/Backing: unplasticized polyvinyl chloride (UPVC) film. Adhesive: acrylic. Release Liner: 58# polycoated Kraft paper..
- Thickness: 5.8 mils (carrier, adhesive) 4.4 ....
Flex Tape Rubberized Waterproof Tape, 8\ x 5', Clear
- tesa 4970 Double Sided White PVC Tape is a white double-sided, 8.9 mils self-adhesive tape consisting of a PVC-film backing and a tackified acrylic adhesive. The product is easily identifiable by its white color and the mustard yellow liner. Since a PVC film carrier/backing the tape is not hand tearable and would require scissors to cut..
- tesa 4970 has an excellent combination of high-tack and immediate adhesion for a quick and easy application process. In addition, the tape has a high coating weight for good bonding performance on rough or dusty surfaces for a wide range of projects..
- This tape is ideal for long-term bonding applications and useful for mounting and bonding applications in all types of industries. tesa 4970 Double Sided White PVC Tape features good resistance to chemicals and is suitable for the bonding of PVC materials due to a good softener resistance. This tape has excellent resistance to aging (UV) and humidity, making it an ideal choice for challenging environments..
- Applications for tesa 4970 Double Sided White PVC Tape include mounting and bonding of plastic and wooden trims, decorative point of sale (POS) materials and displays, signs, and scales, and products in the appliance industry..
- Carrier/Backing: polyvinyl chloride (PVC) ....
JVCC FELT-06 Polyester Felt Tape [1mm thickness felt]: 3/4 in. x 15 ft. (Black)
- JVCC FELT-06 Polyester Felt Tape, 1 millimeter thick, is synthetic needle punched felt made from polyester fibers. On one side, it is felt.
- This tape is most frequently used to join and temporarily repair curtains, fabric and cloth drapes used in backdrops and for other general use vibration dampening. There are many other kinds of uses as well..
- Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered)..
- Adhesive: synthetic rubber. Carrier/Backing: polyester needled felt. Release Liner: paper (reverse wound). Thickness: 49 mils (carrier, adhesive, liner) 39 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel).
- Tensile Strength: 23 pounds per inch (longitudinal) 21 pounds per inch (transverse). Service/Operating Temperature: -30°F to 150°F. Application Temperature: 60°F (minimum). Standards Met: meets RoHS Directive 2011/65/EU. Core: 3 inch diameter.
3M 9415PC Removable Repositionable Tape [Double-Sided]: 4 in. (96mm actual) x 72 yds. (Translucent)
- 3M 9415PC Removable Repositionable Tape is designed for those times when you need a tape that can stand up to repositioning or multiple openings and closings. It’s a double-sided translucent polyester film that’s coated with a removable and repositionable low tack adhesive on its liner side and a high tack, permanent adhesive on the exposed side..
- Double-coated 3M 9415PC tape is effective on various materials or substrates. It can be used to temporarily mount lightweight items such as paper, film, plastic or foam. With most paper stock, it won’t cause delamination. The flexible material surpasses rigid materials such as cardboard in adhering to low tack adhesive. It offers fair resistance to solvents, medium temperature resistance, and good UV resistance..
- Industries that can benefit from using 3M 9415PC removable tape include direct mail marketing, paper and print, electronics, medical labeling, and commercial printing..
- Product applications include mounting, attaching, adhering, affixing, holding and temporary positioning of paper, photographic paper, foams, cardboards, and plastics. Mount notes on classroom walls, adhere posters to foam-core boards, install plastic sheets onto windows, reclose envelopes or bags, create removable labels and stic....