9 Inch 9
- turn regular 24 pin power supply to mini 24 pin.
- NEWLY REVISED adapt regular 24 pin to mini 24 pin for Dell power supply application.
Top Pspower Supply Pin Reviews
TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm
- 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
- 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
- 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
- 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
- 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Comidox 1Pcs 20/24 Pin LCD Computer PC Power Supply Tester for ATX BTX ITX TFX SATA with Buzzer Automatic Alarm
- The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply..
- The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash..
- It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage..
- It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power..
- Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface..
TAYCCEU ATX CPU 8 Pin Female to 8 Pin (4+4) Male Power Extension Cable 2-Pack for Motherboard CPU Power Supply PSUs, 12 inch
- Motherboard ATX CPU 8 Pin Extension Cable. Help you extend the connection from power supply to motherboard..
- Connector A: ATX CPU 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
- Connector B: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.).
- Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
- (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
- Length:12inch(30cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs.
- Warning: This cable is used to extend the connection from power supply to motherboard.It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing..
AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0
- The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
- Support for external 5V~12V DC power supply, Support power supply by 9V battery..
- The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
- The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
- Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W
- 8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
- Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
- RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
- 2x20pin expansion pin header, pin height 10mm/0.39".
- Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).
COMeap 24 Pin Female to Mini 24 Pin Male ATX Main Power Adapter Cable for DELL Optiplex 380 580 760 780 960 980 3.94-inch(10cm)
- 『24P – mini 24P』24 Pin end to plug into the standard 24 pin ATX Power Supply, mini 24 Pin end to plug into DELL motherboard.
- 『Solution』Allowing you to convert standard 24 pin ATX power supply to mini 24 pin power supply connector.
- 『Parameter』Gauge: 1007-20AWG (standard tin-coating copper wire), Length: 3.94inches(10cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs.
- 『Compatibility』Compatible with DELL Optiplex 380 / 580 / 760 / 780 / 960 / 980.
- 『Note』Work on Dell Optiplex power supply / MB( May not work on optiplex 980 MT/SMT ( mini tower or small mini tower ) series as it uses a different power supply set up.). If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
LXun Upgraded L265EM-00 265W Power Supply Compatible with Dell Optiplex 390 3010 790 990 MT Mini Tower, YC7TR 9D9T1 GVY79 053N4 D3D1 F265EM-00 AC265AM-00 H265AM-00 Power Supply Replacement
- 【Upgraded L265EM-00 Power Supply For Dell Compatible Model】: Dell Optiplex 390, 790, 990 Mini Tower (MT)Systems Computer Power Supply. Note:Please Make sure that only applicable to Mini Tower (MT), not to DT/SFF/USFF..
- 【Power Supply Replacement For Dell Optiplex 390 Compatible Model Number】: L265EM-00, F265EM-00, AC265AM-00, L265EM-0, H265AM-00, L265AM-00.
- 【265W power supply replacement for Dell Compatible Part Number】: YC7TR, 9D9T1, GVY79, 053N4, D3D1C, 0YC7TR, 09D9T1, 0GVY79, 0053N4, 0D3D1C.
- 【Power Supply Connectors】: P1:24-pin ATX Power, P2:4-pin P4 ATX Power, P3:4-pin Sata Power, P5:4-pin Sata Power, P8:4-pin Sata Power, P9:4-pin Sata Power.
- 【What You Get】1X Desktop Power Supply Unit (265W) For Dell.
Computer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester, 1.8'' LCD Screen (Aluminum Alloy Enclosure)
- [8-in-1 ATX Power Supply Tester] — Support test 20-pin ATX / 24-pin ATX / HDD (IDE) / Floppy 4-pin / PCI-e 6-pin / 4-pin / EPS 8-pin (NOTE: can not fit for PCI-e 8-pin) / SATA connectors.
- [Aluminum Alloy Enclosure] — Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance.
- [1.8” LCD Screen] — Outputted Voltages shows on the 1.8” LCD Screen, Easy to Read ( The 1.8” LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It？Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It’s Not Beautiful, You Can Tear It Off by Yourself.
- [Beep Alarm] — When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know.
- NOTE: The voltage of 20pin / 24pin connectors is displayed by the LCD Screen, as “+3.3V”, “+12V1”, “+5V”, “-12V”, “5VSB”, “PG” (except “+12V2” on LCD Screen).
- The voltage of PCI-e 6P / 4P / EPS P8 connectors is displayed by the LCD Screen as “+12V2”.
9 Inch 9" ATX Power Supply Motherboard 24 Pin to Mini 24 Pin Cable Adpter for Dell Optiplex 380,Optiplex 580,Optiplex 760,Optiplex 780,Optiplex 960,Optiplex 980
- work on Dell Optiplex power supply / MB ( May not work on optiplex 980 MT / SMT ( mini tower or small mini tower ) series as it is using a different power supply set up.).
- NEWLY REVISED adapt regular 24 pin to mini 24 pin for Dell power supply application.
- turn regular 24 pin power supply to mini 24 pin.
S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties
- 【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
- 【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
- 【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire，Able to....
- 【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
- 【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....
Computer PC Power Supply Tester 20/24 4/6/8 PIN for ATX, ITX, BTX, PCI-E, SATA, HDD, IDE with Aluminum Alloy Enclosure 1.8' LCD ATX Power Supply Tester
- 【ATX Power Supply Tester】SAMFINTON computer power supply tester support 20-pin / 24-pin / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors..
- 【Aluminum Alloy Enclosure】Nice thermal conductivity & corrosion Resistance,with a high strength housing. The computer power tester is more durable than the plastic case on the market..
- 【Practical PC Power Tester】The 1.8inch LCD display intuitive and accurate display outputted Voltages (+/-0.01V), automatic fault alarm..
- 【Normal】Turn on the power supply, will hear “DiDi” ring, If all groups of data are not flashing, the power supply output voltage is normal..
- 【Faulty】If a certain voltage signal is not detected, or the detected voltage value exceeds the normal value, a long “beep” buzzer will be emitted.
- if the corresponding voltage value or PG also flashes, it indicates a fault..
Coolerguys 12V Fan Power Supply, Length: 5ft, Input Power: 100-240vAC, Output Power: 12vDC Volts, Multi-Functional, Highly Compatible
- Prime- Quality Material: This premium fan power supply is made from high-quality material. This highly durable and multi-functional 3+ pin computer fan power supply offers long-lasting performance..
- Easy to Use: This computer fan power supply is a 3+ pin supply that eases connection issues and also comes in a length of 5ft, thereby solving all short cable worries. It will run either a standard 3pin or 4pin PWM fan..
- Easy Installation: This 12V fan power supply is easy to plug and use. The cable offers great flexibility, is sturdy, and is highly compatible with fans, spitters, etc..
- Warranty: We offer a 3-year warranty on any manufacturer's defects..
- Satisfaction Guarantee: We are a U.S.-based seller. All items are 100% new & shipped from the United States. We ensure complete customer satisfaction..