Top Psnyko Intercooler Reviews

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Cold Side Intercooler Pipe with Boots Compatible with 2003-2007 Ford 6.0L Powerstroke Diesel

  • Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
  • Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
  • Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Rev9 ICK-056-BLACK ICK-056-BLACK Front Mount Intercooler Kit, Stealth Black FMIC Performance Upgrade, Bolt On, compatible with Ford Focus ST 2013-18

  • compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
  • Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
  • With Wind Deflector To Tunnel Air Into The intercooler.
  • Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
  • Included Hardware For Direct Bolt On Installation.
  • No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..
Check Stock

T04E 8PC T3/T4 UNIVERSAL TURBO KIT V-BAND TURBOCHARGER WASTEGATE INTERCOOLER

  • Perfect for 4/6 cylinder 1.5L-2.5L engines. Up to 400HP. Power performance output capability = 25-35 psi. CNC machined flanges..
  • 1 x Turbo Oil Return / Feeding Line Kit: Stainless steel braided, it helps circulate oil from the turbo charger to the oil pan.
  • 1 x Intercooler : Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Intercooler core size: 21*7*2.5 . Support up to 350 hp for this small intercooler size – tube and fin style ..
  • balancing Test by TURBOTECHNICS VSR3. G3-min-Flow VNT Turbo testing. Advanced Actuator Tester/Programmer.
  • Need modifications – Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. ).
Check Stock

ACDelco Professional 26221 Molded Turbocharger Intercooler Hose with Clamps

  • Color: Silver Pipe & Black Silicone Boots.
  • Upgrade from factory plastic tube that explodes,Tuning is NOT required.
  • Aluminium CNC / Strong durable intercooler boot.
  • Pipe Diameter: 3" (Lower Section), Pipe Diameter: 3.5" (Upper Section), Silicone Boot 1: 3.
Check Stock

Design Engineering 080108 CryO2 Intercooler Sprayer Kit

  • Enhances intercooler thermal transfer ability.
  • Lowers air temperatures by as much as 35%.
  • Improves intercooler efficiency by as much as 50%.
  • Non-invasive system - Ability to run more boost safely.
  • Straight forward easy bolt on installation.
Check Stock

BOXI Turbocharger Intercooler Hose Assembly For 2003 2004 2005 2006 Dod-ge Sprinter 2500 3500/2002 2003 2004 2005 2006 Mercedes-Benz Sprinter 2500 3500 2.7 L5 DIESEL / 26272 5120147AA

  • This Gates Turbocharger Intercooler Hose is compatible with Dodge Sprinter 2500 2006, 2005, 2004, 2003 2.7L L5 (Intercooler to Engine Cold Side ) and is perfect for a tune up or performance upgrade..
  • ENHANCE PERFORMANCE: The Gates Turbocharger Intercooler Hose features a high-quality silicone cover for extreme temperature resistance in high-temperature conditions. The Gates Turbocharger Intercooler Hose has all the parts including turbocharger hose and 2 correctly fitted T-bolt clamps (where shown) needed to complete your repair.
  • MAXIMIZE SERVICE LIFE: Manufactured with multiple layers of reinforcement, the Gates Turbocharger Hose showcases a specially formulated fluoro-elastomer liner that prevents oil permeation while the T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing. Built to last, Gates manufactures OE-quality hose solutions that comply with SAEJ2050 specifications to help minimize maintenance.
  • RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be ....
Check Stock

GT45 13PC T4 TURBO KIT+MANIFOLD+INTERCOOLER CHEVY SMALL BLOCK LSX CAMARO LS1

  • Mustang Fox Body Twin Turbo High Performance Package.
  • Bolt on Aluminum Intercooler with Intercooler Piping kit.
  • Kit now feature Internally Wastegated Turbo Units for ease of installation.
Check Stock

FORTLUFT Universal Turbo Aluminum Intercooler Piping & Joiner Coupling (Straight Pipe, 3.00''/76mm)

  • Outside Diameter 3.00''/76mm - Wall Thickness 0.07''/1.8mm – Overall Length 23.60''/600mm.
  • Universal, Polished Aluminum, Bead rolled edges.
  • Used in automotive, industrial and marine, such as air intake, cooling systems, turbo intercooler piping.
  • FORTLUFT provides the guarantee for the Universal Turbo Intercooler Piping Aluminum tightness for the 2-year period without any limitation on the mileage after the spare part installation..
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock

MooSun 2\ 8-Pcs Universal Intercooler Pipe Piping Turbo Polished Aluminum Kit with Silicone Hoses and Stainless Steel T-Clamps

  • Upgraded replacement - this turbocharger intercooler pipe kit features a metal tube to replace a failed plastic original component.
  • Complete kit - includes pipes and clamps needed for repair.
  • Application specific - made to replace the original intercooler hose on certain Ford Super Duty and Excursion model years.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock