Top Pry Bar For Pallets Reviews

WORKPRO 2-Piece Nail Puller Set, 12” Pry Bar, 8” Mini Crowbar, Cats Paw Nail Remover, Claw Bar, for Kitchen Remodel, Prying Apart Baseboard, Multi-sided Forged Steel Made

  • APPLICATION: Polished pry bar end can be wedged into narrow spaces. The angled edge is fit for pulling apart walls, prying off decorative strips, tiles, wood panels and removing moldings, nails & trim, and more. It can be very useful when you’re recycling used pallets or other salvaged wood..
  • HIGH HARDNESS: Crowbar is forged from high-quality carbon steel, with high hardness & durability. The bending strength of 8" crowbar is greater than 500 inch pounds. The bending strength of 12" crowbar is greater than 1200 inch pounds..
  • RUST-PROOF DESIGN: Surface of pry bar is coated with anti-rust oil, which can effectively avoid surface rust and have a longer service life. 8" crowbar weighs 180 grams, and 12" crowbar weighs 420 grams..
  • VERSATILE CONSTRUCTION: The design of L-shaped crowbar helps increase torque, and with the help of leverage, it is convenient to use. It is recommended that you clean the surface and dry it after use, which will help to extend the service life of the crowbar..
  • CONVENIENCE: Crowbar complies with relevant environmental protection requirements and can be used with confidence. The head of crowbar allows for striking as a hammer. Hexagonal shaft has six sides for better grip and is great for levering..
Check Stock

Pallet Buster, Deck Wrecker, Wood Dismantling Tool, 3.1 kg/6.83 lb, 3'' Fork Spacing, Steel Black Head, No Prying Bar

  • HEAVY DUTY: This Heavy Duty tool will take a grueling days work of breaking down pallets and allow you to effortlessly get it done in half the time.
  • The tool is made of high quality materials so you never have to worry about it breaking.
  • NO WASTED WOOD: Our pallet buster will easily remove all the good wood from a pallet without breaking it.
  • EASY TO USE: This easy to use tool will allow you to break down twice as many pallets in half the time when using a hammer and pry bar.
  • All you will need to get going is a 1.25" steel pipe of any length which can be purchased at the local hardware store.
  • LOCKING PIN: The locking pin is what holds the handle to the head of the pallet buster.
  • This pin can go through the pre drilled holes in the head of tool and through the handle, ensuring that the two pieces never come apart while you are using it.
  • SATISFACTION GUARANTEED: Like all of U.S. Solids tools, our Pallet Buster Head comes with a one year warranty.
  • If you have any problems with or questions about the Pallet Buster, give our customer service department a call.
Check Stock

Extreme edc Pry Bar with pocket clip | New generation multifunctional pry bar in luxury gift box | Multi Tool with Bottle Opener Box Opener Clip Function

  • The package includes: Pry bar , Bit PH 2.
  • EXTREME EDC PRY BAR is a new generation multifunctional pry bar. | The pry bar is designed with an emphasis on functionality, comfortable everyday wear and perfect workmanship..
  • Thanks to its compact dimensions, many functions and comfortable wearing, our pry bar will become your everyday companion for traveling urban jungle..
  • The main advantages our pry bar are: CNC milled front part serves as a pry bar | Beer opener | Opener beer also used as a bit holder | Exchange bit PH 2 | Cut-out for loosening nuts | Large hexagon for oxygen bottle.
  • The main advantages our pry bar are: Deep carry clip for comfortable wearing | Body made of high quality stainless steel | Unique surface treatment by blasting with glass balls | Perfect edge processing on a CNC milling machine.
Check Stock

MECWORK 7Pcs (8",10",16") Indexing Pry Bar Set, Heavy Duty 7" Flat Pry Bar and 3 screws,adjustable Lady Foot Pry Bar Set for Mechanics

  • Industrial grade standard & 12 years manufacturer: MecWork has ample experience in making indexing pry bar set, high strength chrome vanadium steel in the use of heavy duty equipped with screws can be directly replaced, 3pcs uniform standard manufacturing so you can replace each other adjustable pry bar head use. Otherwise, you still need to spend time to go to the repair store to repair..
  • Flat & Indexing Pry Bar Set Combination：With both crowbar combinations ranging from nails to engines, Indexing Pry Bar is built from sturdy chromium-vanadium steel for automotive repair, engine and construction applications with a 7-inch Bar. Flat Pry Bar perfect for window & door trim, molding and baseboard on nails..
  • Round Button for Flat Head Upgrade:The 14 lock positions and 180° head rotation can be easily adjusted by gently pressing the round button with your thumb, making the product more fluid when adjusting the lock position and reducing wear on the head, further increasing the durability of the pry bar set..
  • 180° Rotation 14 Bar Force Options：Head Rotates 180 Through 14 Locking Positions For Unparalleled A....
Check Stock

K Tool International Pry Bar Set, Lady Slipper Style; Ultra- Strength Heavy Duty Heat Treated Steel, Rolling Head Pry Bars (6\

  • [PRY BAR SIZES] - K Tool International Pry Bar Set comes with 6'',12'',16'',20'' pry bars. This heavy duty pry bar set will complete all of your leverage needs..
  • [ULTRA-STRENGTH] - Pry bar set is made with heat treated steel to proved rolling head with extra durability, strength, and longevity on the job..
  • [SUPERIOR QUALITY] - Heat treated steel provides these pry bars with supieror quality to get any job done. K Tool Intnernational pry bars are made for longevity and are resistant to bending, breaking, or corrosion..
  • [HIGH LEVERAGE] - Pry bars feature high leverage rolling head with long tapered body to align drift. Rolling heads provide high leverage pivot points for heavy machinery, tables etc..
  • [VARIETY OF DUTIES] - Use these rolling head pry bars for many jobs. Align bolt holes on two separate items, wedge pry bar, pull/push seals and bushings into place. Great to move heavy machinery..
Check Stock

Pallet Buster Deck Wrecker Pallet Disassembly Tool Deck Board Remover Best Wrecking Pry Bar for Breaking Pallets Industrial Breaker for Removing or Tearing Down Woods Safety Yellow

  • ✅ QUICKLY AND EASILY DISASSEMBLE PALLETS - After inserting a φ 1.415″ (36 mm) handle, the forks of the pallet buster can be inserted between the....
  • ✅ BUILT TO LAST - Designed by skilled artisans who have a trained eye on every detail and constructed from sturdy and durable solid steel with a....
  • ✅ HEAD ONLY - Save your back, your arms, and your sanity with this pallet pry bar tool head.
  • Includes a φ 1.415″ (36 mm) inside diameter (ID)....
  • ✅ RECLAIM WOODEN BOARDS WITHOUT DAMAGE - Reclaiming boards can be nearly impossible with a crow bar and a hammer. Pallet breakers remove this burden....
  • ✅ SATISFACTION GUARENTEED - These pallet buster tools are the real deal. These tools will save your back, save you money, and most importantly save....
Check Stock

REAPR 11015 Versa TAC Wrecking Bar, Tactical Multitool Pry Bars for Demo, EDC, and Survival Gear, Nail Puller Tool w/Ripper Hook, 4\ Blade Head, and More

  • TACTICAL EDC WRECKING BAR: Get an EDC pry bar with bite for the outdoors and versatility for demo.
  • This small pry bar's mix of style and performance puts you at a tactical and work advantage with its 4” blade head, ripper hook, 10mm, 13mm, 16mm wrench, and more.
  • RUGGED BUG OUT BAG COMPANION: Too many survival tools can weigh you down.
  • Travel lightly with a puller bar multitool that excels at tearing through forest thickets, pulling up tent stakes, ripping cloth, or cutting rope.
  • TEAR THROUGH DEMO PROJECTS: Pull boards, carpet, and trim with our EDC pry tool.
  • Perfect for demo days, the pry bar EDC tool's non-slip TPR molded handle and full-tang 420 stainless steel give you maximum leverage you need in a metal pry tool.
  • BUILT FOR STENGTH AND ENDURANCE: Come to every job or camping trip with the right EDC emergency hand pry tool.
  • Built with 420 stainless steel and a powder-coated wrinkle finish for rust resistance, use the 4.0mm thick tactical pry bar blade to pry boards, slice bushes, and more.
  • BY YOUR SIDE: Portability is key on the job and in the woods.
  • Our demo bar tactical tools come with a 1680D ballistic nylon belt sheath with MOLLE attachment so that your tactical pry bar tool can sit on your hip or in your bug-out ba....
Check Stock

Stainless steel 10 inch pry bar tool

  • DURABLE MATERIAL – Pry bar set is made of high-quality carbon steel, and surface is sprayed with plastic to improve durability and prevent corrosion. The heat-treated crowbar is very strong and flexible, which can avoid breaking during use..
  • VERSATILE CONSTRUCTION – The curved claw improves leverage and reduces damage to work piece. Flat claws can be inserted deeper into narrow spaces, thus increasing leverage. The nail groove function makes it easier to pull nails with utility pry bars..
  • WIDE APPLICATION – ValueMax pry bar is strong enough to handle difficult tasks and easy to control, which can assist with a wide variety of DIY tasks, such as lift flooring, remove moldings, extract nails, and more..
  • CONVENIENCE – Utility pry bar set includes 15” heavy-duty pry bar and 7.5” mini nail puller. Two different size of pry bars meet the needs of multiple tasks. Crowbar complies with relevant environmental protection requirements..
  • TIPS – Nail pullers can be used when precision and control are needed for nail pulling, levering, lifting, scraping. Clean pry bar’s surface and dry it after use, which will help to extend service life of crowbar..
Check Stock

TISUR Titanium EDC Pry Bar, Keychain Multitool Tool, Pocket Tool Pry Bar Bottle Opener Keychain Outdoor Tool, Titanium Key Chain for Men (Matte EDC pry bar)

  • 【TITANIUM EDC PRY BAR】- This edc pry bar is made of high-quality TC4 titanium alloy. Titanium is known for its very high strength-to-weight ratio.high strength, thick and durable, light to carry..
  • 【MULTITOOL EDC TOOLS】 - Use this EDC pry bar for letter opening, everyday carry, camping, cleaning, and don't forget about it's EVERYDAY CARRY CLIP so you can easily carry this bad boy everyday.
  • 【 PORTABLE PRY BAR】- Integrated pocket clip for easy carrying and instant deployment in any situation,Many ergonomic design features allow you to obtain maximum grip when using a pry bar..
  • 【EVERYDAY CARRY】 - Easily carry everyday without the added bulk in your pocket, this pry is slim you will barely even notice it.
  • 【WHAT YOU GET】- 1xTitanium edc pry bar it’s a great novelty gift choice for yourself and the ones you love. We pursue that you have a great shopping experience!.
Check Stock

ABN Ladyfoot Rolling Head 4-Piece Pry Bar Tool Set – 6, 12, 16, 20 Inch – for Automotive Machinery Aligning & Prying

  • MAKE ENGINE AND MACHINE WORK EASIER: When you need extra leverage to move heavy machinery in tight places, the ABN 4-Piece Rolling Pry Bar Set will always come in handy.
  • DUAL/DUO ENDS: Use the lady slipper pry bar end for extra leverage when lifting and prying.
  • The tapered (pointed) end can be used as an alignment pry bar to align metal sheets and parts.
  • PERFECT SIZE FOR YOUR NEEDS: Lady foot pry bar set includes 4 wedged pry bars in 6, 12, 16, and 20 inches (15.3, 30.5, 40.7, and 50.8cm).
  • Ideal for a wide range of work from small to large projects.
  • VARIETY OF DUTIES: Use this rolling wedge pry bar to line up subframes with the dowel end, to align bolt holes on two separate items, to pull seals and push stubborn bushings into place, and to move heavy equipment.
  • BUILT TO LAST: Drop-forged, heat-treated steel provides these rolling head prybar sets with maximum strength and resistance to bending, breaking, and corrosion.
Check Stock

Zenith 10" Self-Prying Bar

  • MULTI-TOOL LIGHT WEIGHT & COMPACT SIZE! The Zenith 10" Self Prying Pry Bar was designed with a lighter weight and compact size, making it perfect for working in cramped spaces where there might not be enough room for a larger tool.
  • THE ULTIMATE SALVAGE, WRECKING AND DEMOLITION MULI-TOOL! The Self Prying Pry Bar functions as a best version of the Trim Puller as it does all the work of a flat pry bar, wrecking bar or claw and is great for smaller DIY projects by safely removing baseboards, crown molding, door casings, chair railing, decorative panel and even nailed or glued countertop.
  • LIFT IT, SEPARATE IT, DESTROY IT OR SAVE IT FAST! The unique self-prying action utilizes the strength of the closed center wedge to easily separate anything with reduced effort to allow for PRECISION SALVAGE when high value materials are involved.
  • INTEGRATED NAIL PULLER: The Pry Bar has 2 integrated precision nail removers, one located in the 90 angled face and the other in the tail making it Ideal for repair and remodel projects.
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This pry bar is....
Check Stock

Titanium Pocket Tool Multifunctional EDC Gadget Outdoor Screwdriver Bottle Opener Wrench Mini Pry Bar and Lanyard Hole by Fanycs (Grey)

  • 【High-Quality Material】:The material of this titanium pry bar is pure titanium, pocket clip material is titanium alloy..
  • 【Specifications】: Total length of this EDC pry bar is 5.51" (140 mm), the width is 0.75" (19 mm), the thickness is 0.31 " (7.8 mm), and the weight is 2.29 OZ (65g)..
  • 【CNC Processing】: The pry bar is made of pure titanium through CNC machining. The surface adopts stone cleaning and flame burnt titanium treatment..
  • 【Multi-function】: The EDC pry tool includes a pry bar, a flat-blade screwdriver, a bottle opener, a hexagon wrench and window breaker..
  • 【Portable】: The titanium alloy pocket clip of the pocket pry bar is detachable, lightweight and portable, and can be carried anywhere..
Check Stock

EDC Titanium Pry Bar Pocket Pry Bar Multifunction Pry Tool with Pocket Clip

  • [High-quality material]: Titanium pry bar is made of TC4 titanium alloy with precision processing, which has the characteristics of high strength and corrosion resistance, strong and durable..
  • [Specifications]: The pocket EDC pry bar weight is 1.76 ounces, the length is 4.92 inches, the width is 0.57 inches, and the thickness is 0.29 inches..
  • [Good workmanship]: The edc pry tool is cut from the whole piece of titanium alloy by tight processing. The chamfer is rounded, which is safe and convenient to use..
  • [Multi-function]: The main functions of this EDC pry tool include a pry bar, a flat-blade screwdriver and a box opener. With a screwdriver bit insertion slot, it can be matched with screwdriver bits of different specifications..
  • [Portable]: The titanium pry bar has a pocket clip and a lanyard hole for easy carrying. The pocket clip is detachable and can be removed or installed as needed..
Check Stock