Top Proximity Detection Modules Reviews

3Pcs LJ18A3-8-Z/BX NPN NO Inductive Proximity Sensor Switch Detector 8mm Detecting Distance DC 6-36V M18 Approach Switch 300mA 3 Wire LJ18A3-8-Z/BX for 3D Printer Probe Bed Leveling, MCU Board

LJ18A3-8-Z/BX 5V inductive proximity switch.
Inductive proximity switch lj18a3-8-z/bx theory: Inductive sensor.
8mm sensor inductive proximity supply voltage : DC 6-36V.
Sensitive detection: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
LJ18A3-8-Z/BX application: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is widely used in mechanical automation, 3D printer probe bed leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.

Check Stock

CenryKay LJC18A3-H-Z/BX 1-10mm Sensor Switch Capacitance Proximity Sensor Switch Three-Wire NPN Normally Open Metal Sensor 2PCS

♥【Product name】:Inductive proximity switch is also known as inductive proximity sensor, metal sensor.Detection distance of 8mm to 10mm..
♥【Non-contact switch】:It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching..
♥【Parameter】:Product name : Capacitive Proximity Switch.
♥【Special attention】: After the switch is installed, the sensing distance needs to be adjusted, otherwise, there will be no response when the switch is turned on..
♥【Package content】: 2 x Capacitive Proximity Switch.

Check Stock

ANGEEK 5PCS HC-SR04 to World Ultrasonic Wave Detector Ranging Module for arduino Distance Sensor

...ull set of API drivers and technical documents, making system integration fast and simple. The module package supports the reflow soldering process, complies with the RoHS hazardous substance restriction standards, and is fully compatible with various glass covers and appearance designs..
Unlike traditional infrared proximity sensors, the color and reflected light of the target object will not affect the distance measurement results. But its effective range and accuracy largely depend on environmental conditions and target characteristics, such as reflectivity and size, and sensor configuration. (The accuracy of the sensor is specified as ±3% at the highest, and it is over ±10% under the next best conditions.).
The internal laser emits non-visible light with a wavelength of 940nm, which does not harm the eyes, eliminates the problem of distracting people from emitting red light with other infrared proximity sensors, and enhances the anti-interference performance of external light sources. The sensor's digital architecture and automatic compensation function make it still have a high performance in scenes with high ambient light intensity..
The sensing capability of VL53L0X can support various functions, including gesture sensing or proximity of variou....

Check Stock

Vensans Capacitive Proximity Sensor Switch, LJC18A3-B-Z/AX Capacitive Proximity Sensor Switch 3 Wires NPN NC

【Product Usage】Metal shell. It is a component widely used in automatic control industry for detecting, controlling, and non-contact switching..
【Basic Function 】When proximity switch is close to some target object, it will send out control signal..
【Widely Use】The Proximity Sensor Switch is used for testing parts such as size and speed. Test objects: metal, and non-metal such as plastic, glass, water, oil, etc..
【Perfect Accessory】Also be used in frequency counters, frequency pulse generator, liquid level control and processing procedures for the automatic convergence..
【Operating Instructions】The detection distance varies with the conductivity, dielectric constant, water absorption rate and volume of the tested body, and a large detection distance can be obtained for the grounded metal..

Check Stock

Comimark 3Pcs TL-W5MC1 5mm 3 Wire Inductive Proximity Sensor Detection Switch NPN DC 6-36V

Over-current and short circuit protection,With LED indicator, easily identifiable..
Widely used in automatic control industry for detecting, controlling, and noncontact switching. When proximity switch is close to some target object, it will send out control signal.
The Proximity Sensor Switch is used for testing parts such as size and speed can also be used in frequency counters, frequency pulse generator, liquid level control and processing procedures for the automatic convergence..
Package included: 3 x TL-W5MC1 5mm Inductive Proximity Sensor Detection Switch.
If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply..

Check Stock

uxcell 1-15mm Inductive Proximity Sensor Switch Detector NO AC 110-220V AC 90-250V 500mA 2-Wire PR30-15AO

【Specification】: Detecting Distance: 15mm.
【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity..
【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, paper making, light industry for limiting station, orientation taking count, speeding trial etc..

Check Stock

AITRIP PM Sensor SDS011 High Precision PM2.5 Air Quality Detection Sensor Module Super Dust Sensors Digital Output Compatible with Arduino

[Parameter]: Range length 2m, Range time 30ms, 20mW power, 3V-5V Voltage, I2C Interface, IIC Communication, VCSEL driver.
[Chip]: VL53L0X, measurement results accurate to millimeters.
[Laser]: Laser emits non-visible light with a wavelength of 940nm, does not harm eyes and enhances the anti-interference performance of external light source.
[Application]: Gesture sensing or proximity detection of innovative user interfaces.
Wall detection, Cliff detection & collision detection of home appliances.

Check Stock

HiLetgo 2pcs NJK-5002C Hall Effect Sensor Proximity Switch NPN 3-Wires Normally Open

NJK-5002C Hall Effect Sensor Proximity Switch.
Detection distance 10mm (effective detection distance 0-10mm).

Check Stock

uxcell 4mm Inductive Proximity Sensor Switch Detector PNP NO DC 5-30V 200mA 3-Wire SN04-P for 3D Printer Probe Bed Leveling,MCU Board

【Specification】: Detecting Distance: 4mm.
Wire Type: DC 3 Wire Type (Black, Brown, Blue).
Switch Appearance Type: Rectangular Type.
【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
【Material】: Brass nickel-plated shell, not easy to rust and fade. With 200CM copper wire, strong and durable, and excellent electrical conductivity..
【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc..

Check Stock

InduSKY 2pcs 8mm Inductive Proximity Sensor Detecting Distance Approach Sensor Cylinder Proximity Switch NPN NO DC 6-36V 300mA 3-Wire (Diameter 18mm)

【High Quality】: Brass nickel-plated shell, not easy to rust and fade. With 115CM high-quality copper wire, strong and durable, and excellent electrical conductivity..
【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
【Strong anti-interference】：TVS tube protection, strong anti-interference ability. Non-contact output, and long service life..
【Theory】: Output Type: NPN NO(Normal Open).
【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D printing limit positioning, paper making, light industry for limiting station, orientation taking count, speeding trial etc..

Check Stock

uxcell 4mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 200mA 3-Wire SN04-N Rectangular Type for 3D Printer Probe Bed Leveling,MCU Board

【Specification】: Detecting Distance: 4mm.
Wire Type: DC 3 Wire Type (Black, Brown, Blue).
Switch Appearance Type: Rectangular Type.
【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal..
【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM copper wire, strong and durable, and excellent electrical conductivity..
【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc..

Check Stock

Wiha Non-Contact Voltage Tester Category IV 12-1000V AC with Flash Light - 25506

LED In plastic tip illuminates red and emits audible warning for safe voltage detection.
Non-contact detection on any terminal for safety and efficiency.
Detects AC Voltages between 12 and 1000 volts with the precise proximity sensor.
LED light electrical field meter determines voltage reading for accurate voltage detection.
Universal measurement tip for compatible international usage.
Automatic switch-off after 4 minutes (voltage tester), or 15 minutes (torch) for battery conservation.
Lightweight design with clip for easy portability and storage.
Complies with the EN 61010-1 & IEC 61326 standard and compatible with CAT IV 1,000 AC.

Check Stock

Official Creality 3D Printer Parts Filament Detection Module Detector Sensor Switch Run Out Pause Monitor for Creality Ender 3 V2/CR-10 V2/V3 /Ender 3 Max

Smart module for detecting the status of the filament..
This 3D printer filament detection device sensor kit is compatible with the Creality Ender 3 V2 3D printer..
Independent modularized design: It has been redesigned with new internal structure. The outer cover is frosted, the manufacturing is stylish and....
Precise detection: the blue LED indicates normal filament feed and the blue LED goes out when the filament runs out..
Smooth Filament Travel: The Ender 3 V2 filament breakage detection device contains a microswitch, which uses the principle of mechanical proximity....

Check Stock