Top Protective Film For Lcd Reviews

JPP Backup Camera Monitor 7 Inch Rearview Reversing LCD Monitor Backup Monitor for car Two Video Input Plug V1/V2 Car Rearview Cameras for RV Truck Pickup Van

TFT Lcd Monitor: We have good customer service, if you have any dissatisfaction with the goods, please contact us. JPP 7 inch LCD color display, high....
Screen Dimensions: 7 Inch. Resolution:800x480P 7 Inch Rearview Reversing LCD Monitor Has Capability To Monitor Two Video Inputs V1/V2. V2 Video Input....
Easy To USE And Operate: JPP lcd monitor Comes With An IR Remote Controller For A Easy Operation，Adjustable To Your Needs.
Easy to install: power the system through the power line (working voltage V : 9-36volts). Our power line is equipped with a fuse device, which can....
Note: There is a screen protection film on the screen. It is normal for the protective film to be uneven or with slight scratches. Please tear it off....

Check Stock

OSTENT Fix Repair Replacement LCD Display Screen for Sony PSP 3000 Console

This is a high quality LCD screen replacement part for PSP 3000 series system. It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked LCD screens, wrong color issues..
Each screen is tested before shipping and are working..
The LCD panel is still protected by a protective film..
Tri-wing screwdriver and instruction manual not included..
Compatible with: Sony PSP 3000 series system (Not compatible with PSP 1000 and 2000 series system).

Check Stock

OSTENT Fix Repair Replacement LCD Display Screen Backlight for Sony PSP 1000 Console

This is a high quality LCD screen replacement part for PSP 1000 series system. It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked LCD screens, wrong color issues..
Each screen is tested before shipping and are working..
The LCD panel is still protected by a protective film..
Tri-wing screwdriver and instruction manual not included.
Compatible with: Sony PSP 1000 series system (Not compatible with PSP 2000 and 3000 Slim series system).

Check Stock

Marame 100mm x 100mm 4mm Thinkness GPU CPU Heatsink Cooling Thermal Conductive Silicone Pad

...dule and so on, and any equipment needing to be filled with heat dissipation.
Use guide: 1.remove the old heat-conducting products of the radiator,and clean the surface of dirt and oil stains. 2.Determine the contact position of the chip and the radiator on the radiator, and cut the appropriate size. 3.Tear off the protective film on one side of the conductive silicone sheet Paste to the fixed radiator position.4.And then tear off the other side of the protective film.5.After installation to the radiator to exert certain pressure to make it close to the radiator surface.

Check Stock

2004 204 20x4 Character LCD Display Module HD44780 Controller Blue Blacklight

Durable hard PCB board and metal, ideal for 1602 interface.
Welded by reflow soldering, no burrs, comfortable and safe.
Power supply IC and SD card slot, convenient to uses.
Transparent protective film covered on the display protect it from damage.
Suitable for beginners of LCD color display module,SCM learners and LCD enthusiasts.

Check Stock

Desktop Calculators, Handheld Angled 8-Digit LCD Display, 2 Pack, by Better Office Products, Standard Function, Black, Dual Power with Included Button Battery, 2 Pack

2-PACK - Handheld electronic desk calculators with two-way power, solar and button-cell alkaline battery (included), large (1/2" x 3/8") 10-key buttons, and auto-off function.
LCD DISPLAY - LCD DISPLAY - Angled flat panel LCD screen provides optimal viewing angle that helps prevent glare from overhead lighting.
DUAL - POWERED - Two-way power, solar and button-cell battery (included).
Screen requires bright light for solar battery to charge and maintain its charge.
Remove protective wrap from (included) battery for uninterrupted use..
DURABLE - ABS plastic casing and separately-molded smooth-response keys.
CONVENIENT - Lightweight with even weight distribution for comfortable calculations while using on the desktop or handheld..

Check Stock

Garmin Striker 4 Chirp Fishfinder/GPS Bundle GPS Accessory Bundle and Protective Cover 010-01550-10

Precise design, perfectly matches Garmin Striker 7dv/7cv/7sv Fishfinder GPS.
Made of tempered glass, excellent work performance and durable..
Strong hardness anti-scratch can effectively improve the existing disadvantage of LCD protection film..
Strong adhesive that can make installation easy and attach the film firmly. keep the GPS easy to clean and stop the scrach from the activity.
Ultra slim thickness, anti-fingerprint and oleophobic coated, light penetration ratio 93.7% (Comparison: Glasses 92%, General protective film 80%)..

Check Stock

DROK USB Power Meter DC 4-24V 5A LCD USB A&C Voltage Current Display USB Tester Multimeter Test Speed of Charger Cables Capacity of Power Bank QC 2.0 3.0

1.44” LCD Display --- The multimeter has a 1.44 inch LCD high-definition color LCD display, on which real-time display of the charging status of....
Fast Charging --- Support QC2.0, QC3.0, APPLE 2.4A/2.1A/1A/0.5A, Android DCP, SAMSUNG. NOTE: This fast charge protocol identification mode is for....
Load Test --- This detector can be used with our DROK load testers to test the output voltage, current, power and other parameters of the phone....
NOTE --- 1. The meter is covered with protection film to protect the meter from scratching during shipping. Scratches on the protective film are....

Check Stock

Top Reasons Why Glasses Gallery Is The Best Lens Specialist For All Your Eyewear Needs!

If your top screen is scuffed and scratched then you can restore the clarity and appearance by replacing the plastic lens cover with this compatible replacement. The replacement has a plastic film on both sides which needs to be removed before installation. Compatible with New Nintendo 2DS XL (LL in north America and some other regions) only. Package include: 1 x Top LCD Screen Lens Replacement Plastic Cover with Adhesive Black.
Restore your top screen to a like new condition by replacing your scratched lens cover..
This screen plastic cover supplied with adhesive..
Clear plastic protective cover with coloured boarder surround..
Front and back protective film protects the lens prior to installation..

Check Stock

XH1 Screen Protector Compatible for Fujifilm X-H1 Top & LCD Screen [2+2Pack] WH1916 Tempered Glass Anti-Bubble Anti-Dust Anti-Scrach

【Touch screen】Fits perfectly for Fujifilm X-H1 digital camera top & lcd glass screen, including touch screen.(2PCS Top Screen+2PCS LCD Screen).
【Hardness】9H tempered glass, 0.3mm thickness, 2.5D edge corner, 99%High definition& High Sensitivity,You don't even notice it..
【Protective】Bubble-Free Anti-Scratch Anti-Fingerprints, works great prevent sudden damage,protect your precious camera screen..
【4-Packs】You Will Get: 2 x X-H1 LCD Screen Glass Film, 2 x X-H1 Top Screen Glass Film 4 x Wet Cleaning Paper + 4 x Dry Cleaning Paper. 4 x Dust-absorber. 1 x Installation instruction..
【Guarantee】Provide return and replacement protection. Please contact us if you have any questions about the product (damaged items are received, installation is not successful, etc.), and we will give you a satisfactory service..

Check Stock

ELEGOO 5PCs FEP Release Film Mars LCD 3D Printer 140x200 MM 0.15mm Thickness

Compatible with ELEGOO MARS LCD 3D printer.
200*140 MM and with the thickness of 0.15 mm.
95% light transmittance which ensures high stability of UV lightning.
Heat resistant and durable quality for long term usage.
Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film. Please remove the double-sided protective film before use..

Check Stock

ELEGOO Mars 3 Pro 3D Printer, 4K Mono 6.6 Inch LCD MSLA UV Resin Printer with Odor Reducing Facility and Screen Protector, Speedy Printing and High Precision, 5.62x3.5x6.8 Inch Build Volume

【6.66” Ultra 4K Mono LCD】Equipped with 6.6” 4K monochrome LCD, Mars 3 Pro can prints out works at 35µm super high XY resolution. Build Volume 143×89×175mm/5.62×3.5×6.8in, 40% larger than Mars 2. A protective film is installed on the LCD to prevent resin leakage from damaging the screen.
【High-End COB Light Source】New generation COB light structure is designed with 36 units LED lights, a free-form surface lens and a Fresnel lens, powerful and reliable, resulting in 92% and more uniform UV distribution for higher printing accuracy.
【Comfortable Printing Experience】Build-in activated carbon reducing bad odor of resin, offer you a more comfortable and fresh experience. ATTENTION USB port next to the vat is for odor reducing facility ONLY.
【For Better Printing Results】Upgraded Z-axis linear railway make a more stable and accurate moving, ensuring you will get reliable and consistent results. FEP films 2.0 helps the prints stick nicely to the build plate and protect small supports from broken, improve completeness of your prints.
【ELEGOO Authorized Distributor】You will receive ELEGOO Mars 3 Pro and tool kit, 1-year warranty on the whole printer for quality problems(LCD screen, FEP film, and tool kit excluded), professional technica....

Check Stock

NTQinParts Tempered Glass HD Clear Protective Screen Protector Guard Film for ZTE K88 AT&T Trek 2 8" HD 16GB WiFi 4G-LTE Android Tablet

Tempered Glass HD Clear Protective Screen Protector Guard Film For ZTE K88 AT&T Trek 2 8" HD 16GB Wifi 4G-LTE Android Tablet.
Protect your device's front LCD screen against dust, scratches and eliminate glare.
Designed for perfect fit with the LCD screen.
Offers tough, durable, transparent surface while keeping the LCD screen clean and unscratched.
Attaches smoothly with self-adhering surface.

Check Stock