Top Profile Cutting Reviews

Makita E-00240 16' Saw Chain, 3/8” LP.043”

Narrow kerf reduces width of cutting face resulting in the saw chain moving through the cut faster than a standard kerf.
Low profile chain for increased cutting efficiency.
Low kickback saw chain in accordance with ANSI B175.1 standard.
Twin cutting corners for improved cutting performance and durability.
Top-plate filing indicators makes sharpening easier.

Narrow kerf reduces width of cutting face resulting in the saw chain moving through the cut faster than a standard kerf.
Low profile chain for increased cutting efficiency.
Low kickback saw chain in accordance with ANSI B175.1 standard.
Twin cutting corners for improved cutting performance and durability.
Top-plate filing indicators makes sharpening easier.

Designed for use with your existing ProTouch coping saw.
Replace damaged or worn-out coping saw blades.
These coarse coping saw blades have a tooth count of 17 pt..
Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.

Bi-metal type, HSS M42 grade, 98" long, 1/2" wide, 0.025" thick, 14TPI teeth profile.
14tpi is suitable for cutting thin pipe tube profiles etc.
14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
Suits all bandsaws which use 98" long, 1/2" wide bandsaw blade.

Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile.
14TPI is suitable for cutting thin pipe tube profiles etc.
14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
Suits all bandsaws which use 64-1/2" long, 1/2" wide band saw blade.

ADJUSTABLE HEIGHT BOLTS WITHOUT CUTTING – extension of up to 3 inches for just the right height with NO CUTTING required and comes with ALIGNMENT bullets that guides you to position toilet with ease. UPPER BOLT screws into doble threaded body while the LOWER BOLT retracts and tightens from below with extender included so bolts work with any toilet.
WORKS FOR ANY TOILET INSTALLATION – if toilet bowl flange is above, below or flush with the floor our Zero Cut toilet mounting bolts can adjust to most situations.
SLIDING ADAPTERS tighten the bolts and attach the low-profile bolt caps.
NO TOOLS OR CUTTING REQUIRED and will not damage or scratch the enamel..
PACKAGE INCLUDES (2) stainless steel bolts, (2) lock nuts, (2) brass tee bolts, (2) alignment bullets, (2) brass extenders, (2) slide adapters, and (2) low profile caps.

Bi-metal type, HSS M42 grade, 62" long, 1/2" wide, 0.025" thick, 14/18TPI.
14/18TPI is suitable for cutting tube and profile, do not cut any non-ferrous metal like aluminum etc..
Suits all bandsaws which use 62" long, 1/2" wide bandsaw blade.

Premium Material:This end cutting nipper is made of forged alloy tool steel Cr-Ni for long lasting performance, laquer treatment on surface to prevent rust.
Sharp Jaw Cutting:Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
Non-slip Handle:This 7 inch end niper plier with no-slip red cushion rounded handle offers comfortable grip.
Multi-Functions:High-leverage design and round head profile for easily cutting off nails and screws, trim wires, and pulling out nails and staples, light but smooth construction, easy to open and close in your hand.
Wide Application:The end cutting plier is good at construction, floor installation, carpentersfor cutting copper, aluminum, steel, and piano wire in solid, stranded, or braided forms.

Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 10/14TPI.
10/14TPI for cutting solid bar and hollow tube, profile.
10/14tpi is variable teeth profile, big teeth distance is 2.5mm per teeth, small teeth distance is 1.8mm per teeth.
Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.

【PARAMETER DETAILS】Aluminum profile: 28x28x910 mm (1.1x1.1x36 inch).
【RAIL MILL GUIDE SYSTEM】This list is a 2.7-meter track suitable for open-plate brackets, which is durable and reliable.
【QUALITY】Six pieces square aluminum profile.
Used with chain saw for wood chip cutting.
Creates a straight and level first cut along a log..
【APPLICATION】This rail mill guide system is used with chain saw and chainsaws frame for log wood chip cutting..
【Service】All our products are shipped from US warehouses and you can receive quickly. Hanseryshop has a professional customer service team, ready to solve any of your problems at any time.

Bi-metal type, M42 grade, 80" long, 1/2" wide, 0.025" thick, 14TPI teeth profile for stainless steel.
Suitable for cutting stainless steel and other steel (hardness less than 30HRC), don't recommend to cut non-ferrous metal.
Fixed teeth profile 14TPI is suitable for cutting thin pipe tube profiles etc.
Please do NOT cut any non ferrous metals with this blade.
Suits all bandsaws which use 80" long, 1/2" wide band saw blade.

★10-PACK, 9-Inch Metal Cutting Reciprocating Saw Blades, 14 Teeth Per Inch..
★Bi-Metal (stronger than HCS) material guarantees long lifetime on metal cutting. Maxmized the cutting range from soft to hard..
★Suitable blade height and flexible thin blade body is more resistant to breaking and shattering.
★Fast straight cut, effortless cutting into thick sheet metal, metal pipe and solid pipes/profile..
★【UNIVERSAL COMPATIBILITY】Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi.