Top Professional Grade Welding Stick Holder Reviews

Lincoln Electric Traditional MIG/Stick Welding Gloves | 14\ Lined Leather | Kevlar Stitching | K2979-ALL

GREAT HEAT RESISTANCE – Made of a high grade leather and soft cotton liner which is designed to withstand and protect against high temperatures..
INDUSTRIAL DURABILITY – The glove design features a high grade leather exterior, kevlar threading, leather reinforced stress points and a fully lined interior to withstand daily exposure to heat, flames, spatter or sparks..
SUPERIOR COMFORT – The soft cotton hand liner and straight thumb design enhances comfort and fingertip sensitivity. The inside cuff is lined with a twill cotton which absorbs moisture during use..
USED BY PROFESSIONALS – This glove model is used by professional fabricators on a daily basis..
Recommended for Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW) or other high temperature applications.

Check Stock

Lincoln Electric womens Jessi Combs Women s MIG Stick Welding Gloves Black Red Medium Pack of 1 US

Sized for women's / children's hands and intended for use in Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW) or other high....
GREAT HEAT RESISTANCE – Made of a high grade leather and soft cotton liner which is designed to withstand and protect against high temperatures..
INDUSTRIAL DURABILITY – The glove design features a high grade leather exterior, kevlar threading, leather reinforced stress points and a fully....
SUPERIOR COMFORT – The soft cotton hand liner and straight thumb design enhances comfort and fingertip sensitivity. The inside cuff is lined with a....
USED BY PROFESSIONALS – This glove model is used by professional fabricators on a daily basis..

Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
✅5 IN 1:Multi-purpose household and welding repair tool kit.

Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
5-200A comfortably welds thin stainless steel and other various metals..
Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..

Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..

Check Stock

WeldingCity 1-Lb ER309L Stainless Steel 309 TIG Welding Rod 1/8\x36\ | Pack of 1-Lb

TIG Welding Gun Holder: This steel welding torch holder weighs 1.7lb with simple overall shape. It has silver granular matte texture.The base is electroplated and polished to reduce the surface roughness and look bright and smooth.
Strong Magnetic Base: The powerful ferrite magnet that has heavy-duty holding stamina and the base are connected by a SC 4.8 screw and nut, which has good performance strength grade.
Convenient Welding Helper: Torch holder will keep your TIG torch secured, the versatile design provides multiple option for torch placement in the holder.
Free of Working Table: Powerful magnet clamps to workbench or the side of the welder, supporting the welding torch firmly, so it won't get bumped off the welding table. The wire/cable can also be nicely arranged.
Fit Most TIG Gun: Our welding torch stand is suitable for most TIG torches.

Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
【Work Great】Which are easy to remove and clean corrosi....

Check Stock

ARC Stick Welder 200Amp 110V Welding Machine, Mini Welder Machine Beginners Welder With Display LCD Use Welding Rod Tools

☢【Powerful Stick Welder 110v】Welding machine delivers the stable current that can make the welder reduce the damage of copper and iron, increase the welding frequency, and optimize the energy efficiency. The stick welding machine with a high -performance fan has a strong heat dissipation to keep it cool. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current.
☢【Safe and Stable Welding Machine 110v】Arc welder machine adopts automatic compensation for fluctuation, under-voltage protection, over-voltage protection, over current protection, and no electromagnetic noise mechanism that enables safe operation. Start arc easily, stable welding arc,optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
☢【Light Duty Welding Machine】Mini welder machine But Big Power. This 110v arc welder features an easy carrying handle, portable carry with adjustable shoulder strap, compact light-weight design, it is convenient for welding indoors and outdoors. So you can work smarter not harder by bringing the welder to the work, the welder machine can be used anywhere y....

Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

GREAT FOR most Arc, MMA, Hand Stick welding jobs.
ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..

Check Stock

Lincoln Electric Heavy Duty MIG/Stick Welding Gloves | Heat Resistant & Durabilty | Large | K4082-L

EXCELLENT HEAT RESISTANCE – The heavy weight leather construction and multi-layer liner was built to withstand and protect against high temperatures..
LONG LASTING DURABILITY – The glove design features heavy weight leather exterior, kevlar threading, leather reinforced stress points and a fully lined interior to withstand daily exposure to heat, spatter or sparks..
SUPERIOR COMFORT – The high grade leather “breaks-in” with usage for improved dexterity and the fleece + foam hand liner is provides a soft air-cushioned feel..
ADDITIONAL SAFETY FEATURES – The heavy weight leather can withstand higher temperatures and the internal foam liner is Flame Retardant to protect and extinguish fire or flames..
USED BY PROFESSIONALS – This glove model is used by professional fabricators on a daily basis..
Recommended for Mig welding (GMAW), Stick welding (SMAW), Flux-Core welding (FCAW) or other high temperature applications.

Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

Easy To Use - MIG welding is easy to do with the MIG180. With the welding machine being wire feed, most people find it easier to use than other welding methods. The MIG180 allows you to create excellent, intricate welding designs..
Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located ....

Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

Check Stock