Top Probe Bnc Reviews

200Mhz Oscilloscope Probe Clip Scope Test BNC End Probe P2200 10X/1X Black with Adjust Tool Kits

  • BNC END CABLE: This oscilloscope probe is good oscilloscope accessories, has a cable with standard BNC end, suitable for BNC interface oscilloscope..
  • ADJUSTMENT TOOL: There is a adjustment tool that can adjust compensation capacitance to match oscilloscope..
  • 1x /10x : This probe is 200MHz oscilloscope probes with a switch for either 1x or 10x attenuation, can meet your different needs..
  • DISTINGUISHED BY COLOR : There are marking circles in different colors help to identify different channels, you can tell the channel quickly and easily..
  • STABLE: This probe has stable performance, providing several accessories ,suit for professional testing..
Check Stock

P4250 Oscilloscope Probe High-Voltage Probe Oscilloscope Probe BNC Oscilloscope Scope Clip Probe Test Lead Kit

  • DETACHABLE HOOK TIP: The oscilloscope scope clip probe has detachable hook tip, the hook is well protected by the plastic case.
  • HIGH PRECISION: Oscilloscope probe has insulated BNC head, high precision, suitable for all standard BNC head oscilloscope.
  • EASY TO USE: Oscilloscope clip probes have compact size, several functions combined in one, this probe is convenient to use.
  • STABLE PERFORMANCE: Locating sleeves of oscilloscope passive probes ensure the stability and reliability of the tip exposed to the test point.
  • PRACTICAL: Marker rings of digital oscilloscope clip probe in different colors help to identify different channels.
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..
Check Stock

Hantek PP80B 2pcs Oscilloscope Scope Clip Probe 1x:10x Oscillograph Rapier 80MHz

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Micsig Oscilloscope Probe CP2100A AC/DC Current Probe 800KHz 10A/100A with Standard BNC Interface

  • The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz..
  • The split design makes the probe small and exquisite , easy to carry and use..
  • This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply..
  • It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter..
  • Satisfaction Guarantee: We offer a 1-year manufacturer’s warranty and lifetime customer support for this product..
Check Stock

Proster 100 MHz Oscilloscope Clip Probes with BNC to Mini Grabber Test Lead Kit BNC to Mini-Grabber Clips Oscilloscope Probe

  • Universal Oscilloscope Probe: 10:1 and 1:1 switchable bandwidth 100MHz, suitable for oscilloscopes from all manufacturers , equipped with the standard BNC connector.
  • Test lead of a BNC connector to 2 mini-grabber clips: 48 inch mini-grabber clips coded in black and red, keep this handy lead on hand for your next electronics project.
  • High Sensitivity: Fully shielded welding BNC connector, less signal interference.
  • pure copper plated gold pin, less contact resistance and good contact performance.
  • Interchangeable Probe Tip. High Input Impedance (X10 Range). Low power consumption and energy-saving.
  • Suitable for all digital oscilloscopes and analog oscilloscopes voltage detectors to test circuit.
Check Stock

Goupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..
Check Stock

BNC Head to Clip BNC Oscilloscope Probe, Oscilloscope Probe, 1MΩ/10MΩ for Industrial Instrument

  • The oscilloscope probe has a BNC head that is suitable for most BNC oscilloscopes..
  • The installation is safe and easy to use, so you don't have to worry about the disconnection of the clip..
  • The attenuation rate of this oscilloscope probe is 1X/10X, easy to install and convenient to use..
  • The compensation capacitance can be adjusted, and the high quality ground clip is very strong and not easy to disconnect..
  • Stable performance and high reliability, it is a practical accessory for oscilloscope..
Check Stock

Fluke 80i-110s AC/DC Current Clamp

  • Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter.
  • Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter.
  • Designed to provide you with safe, high accuracy measurements for a wide range of applications.
  • Specially designed built-in safety features such as the 600 V RMS rating at the input jaws, output cable and BNC connector enhance work safety in industrial and commercial power distribution systems.
  • The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems.
Check Stock

GAOHOU PH0-14 Value Detect Sensor Module + PH Electrode Probe BNC For Arduino

  • Getting the voltage varies on what you’re using. The PH for this sensor is not at 0v for a PH7 it’s around 2.51v from the multi-meter and PH4 at 3.03. If you calculate the step, 2.51-3.03 =-0.52. The difference between ph4.01 and PH7 is 2.99..
  • If you’re using a Particle product like the Photon or Argon, be aware of a bug. It’s a hardware issue with the analog ports fluctuating a ghost voltage. This fluctuation is enough at these low voltages reading to make your ph sway by .7 or more. To fix this, you’ll need to add a 0.1uF cap between the analog port your using and ground..
  • This PH electrode probe must be calibrated with standard buffer solution before each use, and the electrode probe cannot be tested continuously for a long time, which will shorten its life. There are two trimmers on the circuit board. One of them is for offset adjustment (closest to BNC connector) accomplished by removing the Ph probe and shorting the BNC connector with a wire. The other trimmer is an upper limit threshold for the digital output pin..
Check Stock

Goupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock