Top Printer Bed Upgrade Reviews

CR Touch 2023 Upgrade Noiseless Auto Leveling, with Beginner Software Pack, Creality 3D Printer Bed Leveling Sensor Kit for Ender 3 Pro/ Ender 3 V2/ Ender 3/ Ender 5/ Ender 5 Pro

【Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers】The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer...
【Independent Development】Compared with traditional BLTouch or 3D Touch, CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360° translucent protective shell makes CR Touch safer and more exquisite. Positioning accuracy ≤0.04mm, Automatic detection and leveling, can be reused for over 100,000 times..
【Strong compatibility】CR Touch 3d printer auto leveling, Compatible with PEI / sticker bed / glass bed / metal bed.
【Easy to install and easy to use】An SD card comes with our product, which contains all you need for the installation, so that the CR Touch is a plug-and-play upgrade part for your 3D printer..
【After-sales Service】If you encounter unsolvable problems during installation and use, feel free to contact us, the technologist will provide you with detailed solutions within 24 hours..

Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
The 3D printer build plate is easily cleaned with water after cooling down.
Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....

Check Stock

WEEDO TINA2S 3D Printers for Kids and Beginners, Mini 3D Printer with Wi-Fi Printing and Auto Leveling, Fully Assembled Small 3D Printer with Open Source Firmware, Work with PLA/PLA+/TPU

3D Printers for Kids & Beginners: Fully assembled, Auto bed leveling, Massive pre-sliced files. You can get the mini printer up and running in minutes. It is a perfect entry level FDM printer! The size of the small printer is 210*210*290mm, the print size is 100*105*100mm, it rarely takes any room..
WIFI Printing: The printer can print by SD card/ USB/ WIFI. It compatibles with Wiibuilder, Cura, Simplify3d and PoloPrint Pro App. You can control print wirelessly and remotely. TINA2S upgrade wifi module to ensure faster and more stable transmission..
APP Model Library: Awesome pre-sliced models are available at your fingertips in our Poloprint Cloud app. You also can slice your own model with the easy to use Wiibuilder Software. Printing is a breeze. It is a perfect gift for kids on Christmas, Birthday, Thanksgiving, Halloween..
Excellent Print Quality & Reduce Clogs: Auto bed leveling improves bed adhesion and accuracy. Dual Z-axis design makes printing more stable. Bring you high print quality. Upgraded high speed cooling fan and hotend reduce the clogs. Clip-on design allows you to replace the nozzle easily and qui....

Check Stock

Creality Original CR-10 V2 Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10 V3 / CR-10S Pro V2 / CR-10S Pro/CR-X/Ender 3 Max 320 x 310mm

EASY REMOVAL OF PRINTS: Upgrade part, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and....
DURABILITY: The bed surface is capable to work at 70℃..
CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models..
SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of....
SIZE: 320x310mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds..

Check Stock

LANMU Glass Bed Clips Clamps Compatible with Ender 3/3 Pro/3 V2/3S,Ender 5/Plus CR-10/10S Pro,CR-20 PRO Adjustable Stainless Steel 3D Printer Heated Bed Clips（Pack of 4）

Adjustable Glass Bed Clips: Ideal tight and stay clip for 3D printer bed, allow you to adjust the clip freely according to the thickness of the....
Upgrade 3D Pinter Platform Clips: Made of high quality stainless steel material, it is not easy to bend or break. It works better than original binder....
Easy to Use: Easy to install and remove, able to hold the glass and tightly in place but will not damage the bed, convenient to use.You can clamp them....
Wide Compatibility: These 3d printer bed clips can match with Creality Ender 3 pro, Ender 3,Eder 3S, Ender 3 V2,Ender 5, Ender 5 Pro,Ender 5....
Warranty: LANMU provides a lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if....

Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle

Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing..
Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..
Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.

Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....

Check Stock

SUNLU 3D Printer S8 Plus FDM 3D Printer with Big Build Volume 310x310x400mm 3D Printing Size Resume Printing Function Fast Assembly DIY 3D Printers Comes with a Roll of PLA Filament

①【Large Build Volume】SUNLU new FDM 3D printer S8 Plus, 310x310x400mm large printing size printer, do not need to print items in parts, save time....
②【Quick Installation】95% pre-assembled, the printer can be used in a few simple steps after receiving. Disassembly is as simple as assembly,....
③【Double-sided Movable Plate】The SUNLU S8 printer is equipped with a double-sided use glass bed/plate, one side has smooth glass surface, the....
④【Resume Printing Function】Users can pause printing at any time, and resume printing after adjusting the filament. Don't need to be afraid of....
⑤【Upgrade Parts】 Compared with the S8 version(SUNLU S8 3D Printer), S8 PLUS 3D Printer has been improved the Extruder Spring, Swing-Arm,....

Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

【Intelligent Detection】Crealtiy CR Touch adopts multi-point detection intelligent compensation technology. CR touch is an automatic leveling accessory for 3d printer platform independently developed by Crealtiy. It is more stable than the traditional BL touch leveling function, and you can get better quality with less money product upgrade..
【Strong Compatibility】CR Touch 3d printer auto-leveling is compatible with all printing platform materials such as PEI/sticker bed/glass bed/metal bed, etc. No matter what kind of printing platform material you use, it can adapt and work stably..
【Longer Service Life】 Crealtiy CR Touch has been upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, thereby greatly increasing the service life of the probe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7....

Check Stock

3D Printer with 10m PLA Filament Mini Printer with Mobile Printing Platform High-Precision Printing Mini Desktop 3D Printing 12 x 12 x 12cm Low-Noise Design

High-precision print head: The 3D printer uses a professional nozzle to ensure the best printing temperature and minimise the risk of clogging and....
Fast heat-up: SX1 printers are much easier to use than their 3D counterparts. It comes with a unique button system that allows you to start, stop and....
Quiet printing: The printer moves smoothly during printing, ensuring stable printing speed and quality and minimising noise. The working decibel is....
Quick assembly: 3D Printer consists of three main parts and can be assembled in a few steps. You can enjoy the fun of assembling parts by yourself and....
Advanced function: The 3D printer can expand the hot bed and display by itself with specific accessories. You can also upgrade the printer to a laser....

Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle

ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Matte Black.
Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.
Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..

Check Stock

SearQing Creality Upgrade 3D Printer Kit with PTFE Teflon Tubing,Premium Metal Bed Springs, PC4-M10 Pneumatic Fittings and Two Blue Collet Clips

【Professional】The tubes in this series are suitable for 1.75mm filaments,and rated for higher temperature usage than cheaper PTFE alternatives.The inner diameter tolerance is much stricter than competitors in this field, and it can bring better performance in all Bowden-style printers that use it..
【Upgrade】 Compared with today's ordinary 3D printer plastic extruders, this upgrade helps to ensure that the feed rate is more uniform over time and has higher wear resistance. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine..
【Compatible with printer】 The spring contained in this package is suitable for CR-10 series printers and is 5 mm longer than Ender series springs. But they are compatible with Ender series printers. You may need to raise the z-axis limit switch by 4-6mm to accommodate the longer length. These 6 heavy-duty springs provide much more resistance and will hold the bed level much longer than your stock printer springs.This ensures more consistent results, higher print quality..
【High-quality upgrade parts】 The stainless steel pneumatic fittings are top of the line fittings with metal teeth inside that will grasp the PTFE tubing ensur....

Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
QUANLITY ASSURANCE-All products in this shop provide free lifetime service.

Check Stock