Top Pressure treated Lumber Reviews

Swing Set Anchor Leveling Kit :: Includes Four Large Molded Rubber Blocks with Stakes and Hardware for Installation :: Keeps Your Swing Set Safe and Secure While Protecting Wood from Ground Moisture.

  • ...ngdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" galvanized lag screws and galvanized washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and swollen, it may create a tight fit in the bracket. If your treated lumber is dry, the wood will be easier to fit in the bracket. Once in the bracket and screws are fastened, the lumber should have a snug fit..
  • NOT INCLUDED: The treated lumber, Jungle Gym Kingdom swings, Jungle Gym Kingdom swing hangers, and Jungle Gym Kingdom trapeze shown in the images to the left ar....
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • ...rbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed..
Check Stock

Tenino Copper Naphthenate 17% (2% as Metal) - 1 Gallon - Wood Preservative

  • Ready-to-Use Copper Naphthenate 17% (contains 2% copper as metal), meets the AWPA M4 Standard.
  • Required by building codes (IBC 2303.1.9 & IRC R317.1.1) on end-cuts of all pressure treated lumber.
  • Labeled for General Use, and wood treated with Tenino maybe discarded in local landfill.
  • Water repellant and both toxic and repellant to termites and other wood destroying insect.
Check Stock

Senco #6 X 1-5/8 In. Drywall To Wood Screw

  • All screws are collated in flexible strips.
Check Stock

Fastenmon Wood Screws 10 x 3 1/2 Inch 1200 pcs 21 lb Approx Type 304 Stainless Steel for Outdoor Wood Construction One T 25 Bit Included

  • SIZE: #10 x 3 1/2 inch 1200 pcs pack 21 lb approx. T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration and Self Drilling. FLAT HEAD with NIBS COUNTERSUNK resulting a flush surface with wood..
Check Stock

FastenMon Stainless Steel 304 Wood Screws #10 x 2 Inch - 100 Pieces 1 Pound Approx - Torx Flat Head Type 17 Point - Outdoor Deck Screws Including T25 Star Drive Bit

  • SIZE: #10 x 2 inch 100 pcs pack 1 lb approx. one T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration. FLAT HEAD with NIBS resulting a flush surface..
Check Stock

FastenMon Stainless Steel 304 Wood Screws #10 x 2-1/2 Inch - 1200 Pieces 15 Pound Approx - Torx Flat Head Type 17 Point - Outdoor Deck Screws Including T25 Star Drive Bit

  • SIZE: #10 x 2.5 inch 1200 pcs pack 15 lb approx. T25 star drive bit included..
  • STAINLESS STEEL 304 provides persistent CORROSION RESISTANCE and RUST FREE in most OUTDOOR application..
  • Use with Hardwood, Softwood, Wood Plastic COMPOSITE DECK material, and PRESSURE TREATED LUMBER like ACQ, CA, and CCA lumber..
  • MULTIPRPOSE CONSTRUCTION SCREWS use in Decks, Docks, Fences, Boardwalks, and Jetties, Finishing Millwork, projects require HIGH QUALITY..
  • STAR DRIVE, also known as TORX DRIVE, offers a stable fit resulting an easy drive and preventing “Cam Out”. Type 17 sharp point provides easy penetration. FLAT HEAD with NIBS resulting a flush surface..
Check Stock

Freeman SSSF16-2 16 Gauge 2 Stainless Steel Straight Finish Nails 1 000Count

  • 1, 000-count box of 16 gauge 2 inch stainless steel straight finish nails.
  • Nonmagnetic 304 stainless steel resists rust and can withstand corrosive environments.
  • Stainless steel straight finish nails won't corrode and stain natural finish woods or pressure treated lumber.
  • Ideal for door and window casings, Crown molding and trim installation, and other outdoor projects.
  • Chisel point nails deliver efficient and dependable performance.
Check Stock

Flashing Kings 16oz Copper Sheet Metal Flashing 12 Width

  • 99.9% Pure lead free Copper. Uses include: roof flashing, roof edges, waterproofing, prebents, hobbies, crafts, and DIY projects..
  • Offer includes 10' roll of our mill finish copper in your choice of: 2" flashing width, 4" flashing width, 6" flashing width, 8" flashing width, 10" flashing width, 12" flashing width, 14" flashing width.
  • Order with confidence our products are covered by the Amazon A to Z Guarantee.
  • Flashing material can be used with pressure treated lumber.
Check Stock

Flashing Kings 16oz Copper Sheet Metal Flashing (2' Width)

  • 99.9% Pure lead free Copper. Uses include: roof flashing, roof edges, waterproofing, prebents, hobbies, crafts, and DIY projects..
  • Offer includes 10' roll of our mill finish copper in your choice of: 2" flashing width, 4" flashing width, 6" flashing width, 8" flashing width, 10" flashing width, 12" flashing width, 14" flashing width.
  • Order with confidence our products are covered by the Amazon A to Z Guarantee.
  • Flashing material can be used with pressure treated lumber.
Check Stock

BOSTITCH Framing Nails, Plastic Collated, Metal Connector, Thickcoat Galvanized, Round Head, 21-Degree, 1-1/2-Inch x .148-Inch, 1000-Pack (RH-MC14815G-S)

  • The framing nails have a full round head.
  • BOSTITCH framing nails feature the bend yield of 90,000 PSI.
  • Good for use in all pressure treated lumber.
  • Thickcoat Galvanized Finish, Heat Treated.
  • For Use in the Bostitch F21PL and N88RH-2MCN Industrial Roundhead Stick Framing Nailers.
Check Stock

National Hardware N278-879 V7721 Corrugated Joint Fasteners in Bright, 30 pack

  • Siding Nails 2-1/4-Inch x .092-Inch, 15-Degree Collated Wire Coil.
  • Full round head and ring shank, hot dipped galvanized fiber cement material offers superior protection in all pressure treated lumber.
  • Material - HDG steel (Hot-Dipped Galvanized Steel).
  • 2-1/4-Inch x 0.092-Inch. Also know as siding nails 2-1/4In, siding nails coil, coil nails siding, coil nails 15 degree, coil nails 2-1/4In.
  • Package includes 12 x 300 count siding nails.
Check Stock

Freeman SSAF1534-25 15-Gauge 2-1/2 Glue Collated Stainless Steel Angle Finish Nails 1000 count

  • Ideal for door and window casing, moulding, trim, chair rails, cabinetry and other fine finish applications.
  • Compatible with most 15-gauge angle finish nailers capable of firing 34 degree 2-1/2" glue collated finish nails, such as the Freeman PFN1564.
  • Solid stainless steel for strength and durability.
  • 304 stainless steel angle finish nails won't corrode and stain natural finish wood or pressure treated lumber.
Check Stock