Seachoice Cast Bronze Marine Boat 2 In. Garboard Drain w/ Brass Plug
- Cast bronze garboard drain with brass plug allows bilge to drain when a vessel is hauled out of the water.
- Protective clear package for easy visibility and application.
Top Pressure Vessel Pipe Reviews
Beduan Pneumatic Tubing Pipe 3/8\ OD Blue Air Compressor PU Line Hose Tube for Water Fluid Transfer 10Meter 32.8ft
- PU Tubing Pipe Material: PU( Poly Urethane ).
- PU Tubing Pipe Size: 3/8" (Outer diameter) , 1/4" (Inner diameter). Package Total Length:32.8 Feet (10meters).
- Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
- Tubing Pipe Features: Excellent flexibility, Small bending radius.
- Wide range for working temperature and pressure.
- Excellent chemical properties, Minimal pressure loss.
Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)
- 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
- 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
- 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
- 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
- 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
- it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI
- GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
- PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
- CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Beduan Pneumatic Tubing Pipe 5/16 OD Clear Air Compressor PU Line Hose Tube for Water Fluid Transfer 12Meter 39.4ft
- PU Tubing Pipe Material: PU( Poly Urethane ).
- PU Tubing Pipe Size: 5/16" (Outer diameter) , 3/16" (Inner diameter). Package Total Length:39.4 Feet (12meters).
- Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
- Tubing Pipe Features: Excellent flexibility, Small bending radius.
- Wide range for working temperature and pressure.
Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear
- Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
- Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
- Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
- Thick formula fills gaps in large diameter pipe and loose fitting joints.
- Recommended for potable water, pressure pipe, conduit and DWV.
- Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Automotive Smoke Machine Leak Detector, EVAP Vacuum Leakage Diagnostic Tester with Pressure Gauge & Flow Meter for All 12V Cars
- ...ntake pipe of the car with the detector.3. Connect detector with DC12V battery, it starts to work.4.The pipe will be filled with smoke. Check the leak points. Note：The packaging does not contain oil but there is an oil delivery bottle..
- 【ADJUSTABLE AIR FLOW METER & PRESSURE GAUGE】You can easily control the air pressure, because if the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected.
- You can observe the barometer to determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. On the contrary, your car’s pipeline leaks need to be repaired..
- 【WIDE COMPATIBILITY】Fuel pipe leakage locator is used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. It is suitable for all makes and models of cars..
Nasty Bitch (Feat. Money Mark Of Tre+6) [Explicit]
- PROTECTION—Our personal watercraft fenders are designed to protect the sides of your vessel. Constructed with the tough and resilient marine-grade vinyl, these fenders conform to the shape of your watercraft and are used for slow speed docking only.
- INNOVATIVE DESIGN— These Taylor Made boat fenders are specifically engineered with a hook on the bottom that has a ‘hinge’ type action so you can quickly attach to the bond flange. Get the fenders built by the brand who has set the standard on design.
- BUILT TO LAST—These boat fenders are made for resilience and durability. The football-needle inflation valve lets you easily adjust air pressure levels easily with a standard air pump. The fenders come with a suction cup and securing line.
- FIT — Our PWC fender is designed to fit most watercraft profiles but is not a custom fit. It is important to note that you will experience varying and different levels of fit from these fenders based on the exact make, model and year of your vessel.
- MADE IN THE USA — Built right here in the USA, boaters know they can trust the quality and durability of our quality fender when they are docking their vessel. Choose the PWC fenders that everyone is talking about-choose Taylor Made.
Christy's Handy Pack: Wet Or Dry Conditions Medium Body PVC Cement and Purple Primer, 1/2 Pint (8 fl oz)
- Sets and cures quickly in wet/dry conditions for easy, efficient use.
- Cement works without a primer for non-pressure systems up to 6" and with pressure systems below 4".
- Designed for a variety of applications including PVC pipe and fitting, potable water, pressure, non-pressure, conduit, drain, duct, DWV, and sewer.
- Both products are low-VOC for a pleasant working experience.
- Purple Primer aggressively softens the surfaces of PVC and CPVC pipe and fittings - Form a complete pipe joining solution.
Taylor Made Products 144 Personal Watercraft Pickup Buoy (Rocket Red)
- PROTECTION—Our personal watercraft fenders are designed to protect the sides of your vessel. Constructed with the tough and resilient marine-grade vinyl, these fenders conform to the shape of your watercraft and are used for slow speed docking only.
- INNOVATIVE DESIGN— These Taylor Made boat fenders are specifically engineered with a hook on the bottom that has a ‘hinge’ type action so you can quickly attach to the bond flange. Get the fenders built by the brand who has set the standard on design.
- BUILT TO LAST—These boat fenders are made for resilience and durability. The football-needle inflation valve lets you easily adjust air pressure levels easily with a standard air pump. The fenders come with a suction cup and securing line.
- FIT — Our PWC fender is designed to fit most watercraft profiles but is not a custom fit. It is important to note that you will experience varying and different levels of fit from these fenders based on the exact make, model and year of your vessel.
- MADE IN THE USA — Built right here in the USA, boaters know they can trust the quality and durability of our quality fender when they are docking their vessel. Choose the PWC fenders that everyone is talking about-choose Taylor Made.
GrowlerWerks uKeg Carbonated Growler-Great Gift for Beer Lovers, 64 oz, Copper
- CARBONATION CAP - automatically regulates pressure to optimally carbonate beer Choose desired carbonation level from zero (off) up to 15 psi.
- VESSEL - durable double-wall Vacuum-insulated stainless steel.
- PRESSURE GAGE - easily read the pressure inside the growler.
- DISPENSER TAP - easily pours beer any time without removing cap Plus taplock to prevent dispensing.
Morris Products 60272 Tape Roll, 2” X 100ft X 20 Mil, Black
- HEAVY GAUGE VINYL PIPE WRAP TAPE: Find a durable solution to protect against corrosion in electrical and mechanical piping systems with this self-fusing and self-amalgamating Morris Products Black Pipe Wrap Tape available in 10 mil and 20 mil..
- PRESSURE SENSITIVE PIPE WRAP TAPE: Offer electrical and mechanical protection for all types of valves, joints, pipes and conduit with this pressure-sensitive pipe wrap tape that is UV..
- VERSATILE APPLICATIONS: You need durable products when working with indoor and outdoor overhead and direct burial applications and that’s what you get with this lead-free, UPC approved black pipe wrap tape..
- ULTIMATE STRENGTH: This black pipe wrap vinyl tape offers excellent protection against corrosive salts and sewage, sunlight water and acids for ultimate protection of conduits, joints, valves and pipes..
- COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Raindrip PRYF 30 Pressure-Regulating Y Filter, X 3/4 in. MPT, Black
- Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system.
- Connects to pipe commonly used in underground valve systems.
- Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point.
- Use with a ¾ in. FPT Swivel Adapter to connect supply tubing.
- Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water.
- the filter can also be removed from the middle housing and pulled out to clean.
- Regulates water pressure from water source.
- preset at 30 PSI, ideal for most drip irrigation systems.
- 200-mesh filter washer blocks particles in the water from clogging emitters.
- filter is removable for cleaning and maintenance.
- Filter can be flushed out by removing the flush cap or cleanout cap and running water through.
- also can be removed from the middle housing to clean.
- Comes with one ¾ in. MPT X ¾ in. MPT Pressure-Regulating. “Y” Filter.