Top Pressure Reducing Regulators Reviews

Water Pressure Regulator Valve for Travel Trail Lead Free 3/4" Pressure Regulator Valve Rv Water Pressure Regulator Brass Adjustable with Gauge and Inlet Screened Filter

  • ...re regulator valve,compatible with all U.S. water sources, including 3/4″ garden hose threads and NH threads,bring you continuous water flow and will not reduced the water flow rate..
  • ★【Adjustable Water Pressure Regulator】 – Adjustable from 0- 160 PSI.You can protect your plumbing systerm with our regulators.Adjust screw on the top of regulator to select your desire pressure setting.Suitable for drinking/potable water.Preset at 45PSI.Working temperature:28℉-176℉.Never had it frozen to protect the gauge..
  • ★【Water Pressure Regulator for Travel trailer】 – With regulator gauge can clearly see the water pressure.Regulator gauge contains oil to reduce friction of internal components and greatly increases the life of the RV EQUIPMENT..
  • ★【Camper Pressure Regulator for Easy Installation】- There is installation guide shipped together with the pressure regulator,which means it is easy for you to install the water pressure regulators..
  • ★【Water Pressure Regulator With 2 Years Warranty】 – Using the solid lead free brass, You can reply on our service of 2 years warranty. Each of our Valve have passed the factory inspection before it arrive your home.If you have the slightest problem with your product, give us a me....
Check Stock

Milton 1114 3/8\ NPT Regulator

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/8" center mount..
  • Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

Taprite Primary Keg Brass Beer Regulator With Commercial Pressure Gauge (Dual Gauge 742HPN)

  • Use this regulator on any High Pressure Tank with a CGA-580 valve..
  • Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread..
  • Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder..
  • This regulator has a duck-bill check valve which prevents back flow of liquid into the regulator..
  • 1P1P, CGA580 Inlet, 5/16″ Barb Shutoff w/Duckbill Check, 60lb & 3000lb gauges.
Check Stock

Taprite CGR283 3 Way Secondary CO2 Regulator

  • A secondary regulator will allow you to regulate the pressure of each keg individually..
  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve.
  • Forged brass body for greater durability..
  • All regulators are pressure tested for leaks and defects prior to delivery.
Check Stock

Ninja Air HPA PRO V2 SHP Series Tank Regulator – 4500 PSI

  • The air regulators change the fluctuating output pressure from your tank into a steady supply that provides a consistent and accurate function..
  • Please make sure that your maximum pressure regulation range is below 2800psi, otherwise it will easily cause the regulator valve to leak..
Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Brand New BETOOLL Argon / CO2 regulator and flow meter..
  • Flow Meters are more accurate than the flow gauge regulators..
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
Check Stock

OTC 5630 Fuel Pressure Test Kit , Black

  • OTC's Fuel Pressure Test Kit quickly and easily locates any malfunctioning fuel system component - fuel filters, pressure regulators, fuel lines, and fuel pumps - without removing it from the vehicle.
  • Large, easy to read gauge features an impact resistant rubber encased housing.
  • High quality solid brass fittings, hose, and tubing for long lasting performance and reliability.
  • Convenient pressure relief valve allows for safe, clean testing.
Check Stock

YaeBrew Dual Gauge CO2 Regulator for Draft Beer Homebrew Kegerator CGA320

  • Working Pressure of this YaeBrew Beer Regulator: 0-60 PSI.
  • Tank Pressure of this Keg CO2 Regulator 0-3000 PSI.
  • All YaeBrew regulators are pressure tested before shipment to ensure good performance. there is a Safety Pressure Relief Valve with high fatigue strength and durable inside springs..
  • Application: This Regulator can be used in Shops,Home, Bars, Outdoor, Plants, factories etc..
Check Stock

1/4\ Mini Regulator W/Gauge for Compressor Compressed AIR Pressure

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 3/8" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
  • Max Air Flow: 212 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

EXELAIR by Milton FRL Air Regulator - 3/8\ NPT (EX45R-03)

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 1" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
  • Max Air Flow: 280 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

PneumaticPlus SAR400-N06BG Compressed Air Pressure Regulator 3/4\ NPT - Bracket, Gauge

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/4" center mount..
  • Max Air Flow: 212 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

BW SR-X2V - 4OXV Oxygen (O2) Sensor

  • Brand new high pressure nitrogen tank made of high strength aluminum alloy 6061-T6.
  • 580 valves are CGA approved and have a female thread for nitrogen regulators.
  • Service pressure is up to 2216 PSI/153 BAR.
  • Measures 19.5" tall and 5.5" in diameter.
  • PLEASE NOTE: This tank ships empty and will need to be filled before use.
Check Stock

GasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black

  • Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check Stock