Top Precision Wire Cut Vise Reviews

Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press

  • Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens..
  • The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise..
  • Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape..
  • Holds blanks up to 1-1/2" square. The pen center vise includes a scrap board piece of mdf. It measures approximately 2" by 1/4"..
  • The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. Wooden base is removable and replaceable. If you need a larger base to clamp the vise to your drill press, simply remove the wooden base and replace it with a base made to your exact specifications.
Check Stock

Rotary Fly Tying Vise - Peak Fishing Vise With C-Clamp Mount

  • The PEAK Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime..
  • Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest you can buy..
  • C-Clamp Mount option is engineered to outperform the competition. Reverse the lower rabbeted jaw to get a grip range from 2-1/4" to 11/16"..
  • Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish..
  • The deep rabbet engages rounded table edges so your vise won't rock..
Check Stock

COMOWARE 55 Pcs Pin Vise Hand Drill with Micro Drill Bit Set, Precision Jewelry Drill, Hand Drill for Jewelry Making, HSS Micro Drill Bits (0.3-3.0mm), Craft Drill for Resin Polymer Clay Craft DIY

  • 【DURABLE HAND PIN VISE】- The hand drill features aluminium body that is strong and durable. The 3-jaw hardened steel chuck delivers firm clamp on micro drill bits. And the anti-slip handle design helps the jewelry drill provide stable control on small, fragile and important projects..
  • 【PRECISION DESIGN】- The precisely designed chuck of this pin vise hand drill allows you to easily rotate the vise head with an adjustable clamp range of 0.3 - 3.4mm. These micro drill bits are made from HSS 4241 and roll forged for proven strength and durability. With sharp cutting edge and 118 degree point tip, these twist drill bits delivers clean drilling performance on precision work..
  • 【FULL SIZE SET】- The 55pcs pin vise hand drill with micro drill bit set includes 1 piece hand drill, 1 pair of tweezers, 1 portable storage case and 52 pieces of micro drill bits in 30 different sizes to satisfy all you demand. (1pc x 0.3mm, 0.35mm, 0.4mm, 0.45mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm.
  • 2pcs x 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • 3pcs x 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm.).
  • 【WIDE APPLICATION】- These mini drill bits are light in weight and compact in size. The multi-purpose craft drill is....
Check Stock

Mophorn High Precision Milling Vice 6 Inch,Bench Clamp Vise Nodular Cast Iron Material,Flat Clamp Vise Mill Vise for Milling Drilling Machine and Precision Parts Finishing

  • Clamp Capacity: High precision clamp vise with a jaw width of 5.9 inch (150 mm). Jaw opening: 6.3 inch (160 mm).
  • Main Parameter: Super-lock clamp vise height: 4.7 inch (120 mm). Jaw height: 1.8 inch (45 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
  • High Precision: Precision milling drilling vise, able to accomplish sawing, filing, chiseling and some assembly and removal jobs in milling, drilling machine and precision parts finishing.
Check Stock

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 12.5 Gauge Metal Wire Galvanized Solid Wire for Tightening 12.5 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: you will receive 4 pieces of anchor vise grape trellis and 1 bundle of galvanized iron wire, enough quantity and good combinations to meet your needs and replacements, and you can share some with your friends.
  • Rust Resistant Material: the wire vises are made of aluminum, and the iron wire with galvanized technology has long term applicability, reliable and reusable, not easy to rust, and the anchor cable vise can effectively avoid the iron wire from slipping out, so you can use them with confidence.
  • Size Information: our wire vise is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, suitable for 12.5 gauge wires, the specification of iron wire is 12.5 gauge and each roll is 32.81 feet in length, the matching combinations are convenient for you to use.
  • Practical Tools: this galvanized wire is suitable for making handicrafts, such as frame making, jewelry making, beading, and packaging, it is long enough to meet your different needs.
  • Widely Applicable: these fence wire and wire vise are practical and useful tools, which can be widely applied for building trellises, fences, vineyards, trees and so on, and you can also use the bendable wire to make some handcrafts.
Check Stock

Mabeeze One Way Anchor Vise 8-11 Gauge Wire with Screws, 10 Pack Tightening Vise for Vineyard, Trellis, Arbor or Fences

  • Our one way vises keep your wire tightened preventing it from slipping back and conveniently securing it to the post. Wire vises can be used for a large range of projects including vineyards, trellises, arbors, orchards, animal fences or any other outdoor wire applications.
  • Easy to use, just insert the wire into the long narrow end of the vise towards the plate end and pull from the other side. Once inserted the wire holds in place and can only be moved in one direction..
  • Made of heavy duty aluminum, our waterproof vises are perfect for outdoor use and work best with bare or galvanized steel wire. Wires with other types of coating may not hold on the vise..
  • Includes 10 vises and 20 galvanized steel screws.
  • Wire vise dimensions are 2.3'' x 1.3'' x 1.3'' (6cm x 3.3cm x 3.3cm) and fits 8 to 11 gauge (0.116"-0.160") wire.
Check Stock

5 Pcs Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 12-13 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Package Contents: you will receive 5 pieces of anchor wire vises for building trellises and vineyards, the sufficient quantity is enough for your daily use and replacement needs.
  • Quality Material: these anchor vises are made of quality aluminum material with long term applicable ability.
  • These anchor wire vises can effectively keep the wire from slipping out.
  • Size Information: the size of our wire vise measures approx. 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, the portable size is convenient for you to carry or store those tiny wire vises.
  • Wide Range of Applications: our gauge wire vises can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
  • Choice of Wire: it is recommended to use the anchor vise for grape trellis with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
Check Stock

Olenyer 6in Cross Slide Vise Drill Press Milling Vise, 6 in Jaw Width, 6.1 Max Jaw Opening, Bench Mount Clamp Machine Vice Holder Clamping Tool for CNC Woodworking Milling Machine Drill Press

  • [High Quality] 6" Drill Press Milling Vise is made of high-quality iron material with high hardness and stiffness. Strong clamping force, xy axis movement, operated simply..
  • [XY axis Movement] The X/Y axis feeds in one direction, saving adjustment time.
  • the surface of the guide rail is smooth, and it can move forward and backward freely..
  • [Powerful Clamping Force] The Press Milling Vise has a powerful clamping force and can fix workpieces very securely. Jaw width: 6", Max Jaw opening: 6.1"..
  • [Flexible Handle] The handle rotates naturally and smoothly. Pursue precision in production process, which made the contact surface finely polished, reduces the jam during use greatly and the vise jaw can be easily adjusted..
  • [Wide Application] Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock

IRWIN VISE-GRIP Wire Stripping Tool / Wire Cutter, 5-Inch (2078305)

  • IRWIN VISE-GRIP wire stripper/cutter works as both a wire cutter and a wire stripper.
  • 10-20 AWG selection dial adjusts for stripping wire of varying gauges.
  • Textured grips help reduce hand slippage.
Check Stock

Gyros Professional Swivel Head Pin Vise Hand Drill with Anti-Slip Nickel Plated Steel Body, and Two Reversible Collets for Precision Drilling, Size Range of 0\ (0mm) to 1/8\ (3.175mm) (97-01818)

  • Durable and Precise: This Gyros handheld drill is constructed of nickel-plated steel to ensure the pin vice drill is ready for hobby, professional, and precision jobs it will be used for. The anti-slip design of the handle provides the right leverage for speed and precision when used for intricate drilling tasks where accuracy is critical. Use with Gyros HSS Wire Gauge Mini Twist Drill Bit Set 45-22010 for best drilling experience..
  • Unique Product Features: This manual drill is equipped with a swivel head for comfortable operation, while its octagonal shape helps prevent rolling. Full-length holes allow the pin vice to accommodate any wire or shank length. The two double-ended collets can be conveniently stored in the barrel when it is not in use to prevent damaged, lost, or misplaced collets..
  • Wide Size Range Equipped with two reversible collets, this mini hand drill has a size range of 0" (0mm) to 1/8" (3.175mm). The adjustable chuck head allows for a wide range of bit sizes. Even the smallest bits can be tightened and held in place firmly providing for a variety of jobs..
  • Multiple Uses: This unique finger drill has many different uses given the diverse nature of the tool. Use for precision drilling, electronic assembly, model making, winding, to....
Check Stock

Mophorn Milling Vise 4'/100mm,Bench Clamp Vise Nodular Cast Iron Material,Clamping Vise Clamping Force 19KN Max, Milling Machine Vise

  • Clamp Capacity: High precision clamp vise with a jaw width of 3.94 inch (100 mm). Jaw opening: 4.7 inch (120 mm).
  • Main Parameter: Super-lock clamp vise height: 3.7 inch (95 mm). Jaw height: 1.2 inch (30 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Well-chosen nodular cast iron offers strong toughness, making this clamping vise solid and durable.
  • High Precision: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
Check Stock

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
  • Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
  • The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
  • Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
  • Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
  • Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Check Stock

HFS R Parrot Vise Multi-Angle Vise 3.5

  • [MULTIFUNCTION]: This is a Multi-Angle Bench Vise..
  • [ANY ANGLE]: When the jaw is tightened, the vise rotates throughout 360 degrees and then locks at any angle..
  • [POSITION OF CLAMPING]: It is able to clamp in both upright and horizontal positions..
  • [PRECISION]: The casting process and machining is precise..
  • [INCLUDED COMPONENTS]: Parrot VISE Multi-Angle Vise 3.5..
Check Stock