Top Precision Press Molding Parts Reviews

2 X Energizer 1.5 Volt #386/301 Watch/calculator Batts

【Precision Molding Open Carry Holster】 Tailor-made for G17/19/31/32(Gen1-5), G22/ 23 (Gen1-4), G19x/45. Our Injection Molding System makes sure that every of our holster is not only precise and perfect fit, but also durable and sturdy..
【Level II Retention System】Level II Retention with Index Finger Release System, that means your weapon will stay in the holster without any chance of falling out unless you press the release button to make your smooth draw. Perfect for law enforcement and personal use..
【 360-Degree Adjustable Paddle with Soft Silicon Attached】This paddle will fit 1.5’’, 1.75’’, 2.0’’ wide belt with soft silicon attached on the skin side to make you feel better when it’s against your skin. The paddle is 360-degree adjustable for all carrying position..
【‘POSI-CLICK’ Locking Feedback】This holster provide locking feedback with a crisp clicking sound when weapon is securely sat in the holster and it won’t come out unless YOU want it to by pressing the release button..
【Lifetime Warranty with 24/7 Customer Service】All of our products come with LIFETIME WARRANTY. If you are not 100% satisfied, we provide full refund and replacement to you no question asked..

Check Stock

YueLi Mavic Mini Carrying Case for DJI Mavic Mini Drone Accessories mavic mini

DJI Mavic Mini Storage Bag Carrying Case Protective Box for DJI Mavic Mini Accessories.
Precision molding and comprehensive protection for Mavic Mini..
Capacity:drone,remote controller,charger..

Check Stock

IRWIN Tools VISE-GRIP Tools GrooveLock Pliers V-Jaw 6-inch 4935351

A simple push of a button adjusts the lower jaw twice faster than traditional groove joint pliers.
Adjustable pliers with Multi-Groove Ratcheting System have twice the groove positions of other groove joint pliers, for precise positioning to grip....
Anti-pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue.
Tongue and groove pliers have right angle teeth to grip in all directions for maximum bite.
Metal Injection Molding process for precision parts delivers strength and exceptional performance.

Check Stock

Toolless Adjustment Taurus G3C/G2C Holster, Level II Retention OWB Holster for Taurus G3C,G2C,G2 PT111,PT140, Outside Waistband Carry, Fit 1.5'' 1.75'' 2.0'' 2.25'' Belt, Quick Mounting/Dismounting

【Precision Molding Open Carry Holster】Tailor-made for Taurus G2C/G3C, Taurus G2 PT111/PT140. Our Injection Molding System makes sure that every of our holster is not only precise and perfect fit, but also durable and sturdy..
【Toolless Adjustment One Hand Rotation】Simply press the top button and the holster can be rotated with one hand. No need to spend time finding tools to adjust. All adjustment can be done without any tool. Please check the video to see how it work without any tools..
【LEVEL II RETENTION WITH AN AUDIBLE CLICK】Provide secure retention with Index Finger Release. A handful of grip makes your drawing and pulling quick and smooth without any scratch on slide..
【Quick Mounting/Dismounting Belt Loop】Press the side release to mount/dismount the holster on your belt within seconds..
【Fit 1.5'' 1.75'' 2.0'' 2.25'' Wide Belt】The belt loop can be adjusted to firmly fit belts of different size. Please check the video to see how to adjust the size of the belt loop..

Check Stock

Gears and Barrels Kydex Leather Holster for Glock 19 | 23 | 32 | 45 - OWB Concealed Carry with Adjustable Retention and Leather Lining - Right Hand

【Precision Molding Open Carry Holster】 Tailor-made for G19/19X/23/32/44/45(Gen 3 4 5 Only). Our Injection Molding System makes sure that every of our holster is not only precise and perfect fit, but also durable and sturdy..
【Level II Retention System】Level II Retention with Index Finger Release System, that means your weapon will stay in the holster without any chance of falling out unless you press the release button to make your smooth draw. Perfect for law enforcement and personal use..
【 360-Degree Adjustable Paddle with Soft Silicon Attached】This paddle will fit 1.5’’, 1.75’’, 2.0’’ wide belt with soft silicon attached on the skin side to make you feel better when it’s against your skin. The paddle is 360-degree adjustable for all carrying position..
【‘POSI-CLICK’ Locking Feedback】This holster provide locking feedback with a crisp clicking sound when weapon is securely sat in the holster and it won’t come out unless YOU want it to by pressing the release button..
【Lifetime Warranty with 24/7 Customer Service】All of our products come with LIFETIME WARRANTY. If you are not 100% satisfied, we provide full refund and replacement to you no question asked..

Check Stock

SEOH Plastic Vacuum Desiccator 250mm

【Vacuum storage】suitable for vacuum drying and storage of biochemical reagents, medicines, optical lenses, precision components, seeds, cultural relics and other items..
【High-quality materials】high-quality polycarbonate injection molding, high-quality silicone rubber O-ring seals between the upper and lower parts of the vessel, better sealing performance..
【Long vacuum maintenance time】30 days after vacuuming, the degree of vacuum changes less than 6%. Dry storage under vacuum can greatly extend the storage time..
【easy to observe the internal situation】the transparent container is convenient to observe the storage state of the internal items at any time. The valve core is precisely processed by metal materials, and the air flow rate is gradually regulated from small to large..
【After-sales service】If you have any questions, please feel free to contact us, we will try our best to provide you with better service..

Check Stock

Bandai Hobby Star Wars 1/72 X-Wing Star Fighter Building Kit, Multi, 8' (BAN191406)

A high detail precision model kit utilizing Bandai’s trademark color injection molding techniques, 1/72 X-Wing features opening and closing S-foils and a cockpit with 2 different canopy options.
Death Star panel themed display stand can connect with stands from other vehicles to recreate the iconic Death Star Trench Run..
The exhaust of the trench and 2 proton torpedo effect parts are included with this x-wing to recreate the Rebel victory in “Star Wars: A New Hope.”.
Product Bears official Bluefin Distibution Logo..
Tested for safety and in compliance with all North American consumer product safety regulations.

Check Stock

Digital Spoon Scales - Food Measuring Spoon, Scale Ounces and Grams 500g/0.1g, Small Electronic Baking Scale with LCD Display for Coffee Beans,Milk,Tea,Flour,Oil (Black)

✔ High Precision - This digital spoon scale is equipped with accurate sensors and LCD displays with a score of 0.1g, the measurement range is 0.5g-500g. (Note: Because of the principle of mechanics, please read the product when the product is at a horizontal position. Excessive tilt will affect its accuracy.).
✔ Perfect Overall Design - The body of this measuring scale is made of high-quality ABS molding, which has high precision digital gravity sensor,lightweight and protable easy to storage..
✔ Easy to Use - Press "Mode" button, you can be in G/OZ/C/Gn, the conversion between the four units can help you measure different ingredients and food. When the displayed weight is stable, press the "HOLD" key to lock the displayed weight..
✔ Easy to Clean & Storage - The digital kitchen spoon does not take up too much table space, and you can also hang digital measuring spoon on the wall of the kitchen by hook up. After use, remove the spoon and clean it. Please be careful not to let the water splash inside the electronic scale..

Check Stock

Toolless Adjustment Glock 19/17 Holster, Level II Retention OWB Holster for G17/19/19X/22/23/31/32/45, Fit 1.5” 1.75” 2.0” 2.25” Belt, Quick Mounting/Dismounting Belt Loop Attachment G19

【Precision Molding Open Carry Holster】Tailor-made for G19/19X/45(Gen 3 4 5) G23 G32(Gen 3 4). Our Injection Molding System makes sure that every of our holster is not only precise and perfect fit, but also durable and sturdy. NOT FIT Gen 5 Glock 23/32..
【Toolless Adjustment One Hand Rotation】Simply press the top button and the holster can be rotated with one hand. No need to spend time finding tools to adjust. All adjustment can be done without any tool. Please check the video to see how it work without any tools..
【LEVEL II RETENTION WITH AN AUDIBLE CLICK】Provide secure retention with Index Finger Release. A handful of grip makes your drawing and pulling quick and smooth without any scratch on slide..
【Quick Mounting/Dismounting Belt Loop】Press the side release to mount/dismount the holster on your belt within seconds..
【Fit 1.5” 1.75” 2.0” 2.25” Wide Belt】The belt loop can be adjusted to firmly fit belts of different size. Please check the video to see how to adjust the size of the belt loop..
【TRIGGER GUARD COVER, NO RISK of PRESSING MAG RELEASE】Our precise Aluminum molds designed by our CAD engineers ensure exceptional consistency and accuracy of holsters, covering all access to the trigger, and uncovering mag release s....

Check Stock

[ J&J Products, Inc] 8-32 Brass Insert 50pcs, 0.251 in OD, 0.185 in Length, Female 8-32 Thread, Press Fitting or Injection Molding Type, 50 pcs

Insert Type : Press Fitting or Heat Sink or Injection Molding.
Size: 0.251x8-32x0.185, OD: 0.251 in, Thread: 8-32, Length: 0.185 in.
Create more polished, professional products.
Securely and permanently add metal threads to 3D printed parts.

Check Stock

[ J&J Products, Inc ] 6-32 Brass Insert 50pcs, 0.219 in OD, 0.25 in Length, Female 6-32 Thread, Press Fitting or Injection Molding Type, 50 pcs

Insert Type : Press Fitting or Heat Sink or Injection Molding.
Size: 0.219x6-32x0.25, OD: 0.219 in, Thread:6-32, Length: 0.25 in.
Create more polished, professional products.
Securely and permanently add metal threads to 3D printed parts.

Check Stock

Sig P365 Holsters, OWB Paddle Holster Compatible with Sig Sauer P365/P365 SAS, Open Carry Holster for Outside Waistband, Index Finger Release System/360-Degrees Adjustable

Precision Molding Open Carry Holster: Tailor-made holster for SIg P365/P365 SAS. Our Injection Molding System makes sure that every of our holster is not only precise and perfect fit, but also durable and sturdy..
Level II Retention System: Level II Retention with Index Finger Release System, that means your weapon will stay in the holster without any chance of falling out unless you press the release button to make your smooth draw. Perfect for law enforcement and personal use..
360-Degree Adjustable Paddle with Soft Silicon Attached: This paddle will fit 1.5’’, 1.75’’, 2.0’’ wide belt with soft silicon attached on the skin side to make you feel better when it’s against your skin. The paddle is 360-degree adjustable for all carrying position..
‘POSI-CLICK’ Locking Feedback: This holster provide locking feedback with a crisp clicking sound when weapon is securely sat in the holster and it won’t come out unless YOU want it to by pressing the release button..
Lifetime Warranty with 24/7 Customer Service: All of our products come with LIFETIME WARRANTY. If you are not 100% satisfied, we provide full refund and replacement to you no question asked..

Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.

Check Stock