Top Precision Milled Reviews

Dahle 20396 High Capacity Paper Shredder w/Jam Protection, Solid Milled Cylinders, Security Level P-4, Shreds CDs, 38 Sheet Max, 5+ Users

  • [AUTOMATIC OILING] -- Automatic EvenFlow Lubricator provides continuous oil across the cutting cylinders to maintain peak performance.
  • [PRECISION MILLED STEEL] -- Precision milled cutting cylinders offer strength and reliability.
  • [AUTOMATIC JAM PROTECTION] -- Motor reverses in the event of an overfeed.
  • [CHAIN DRIVEN MOTOR] -- For powerful slip-free performance.
  • [GERMAN ENGINEERED] -- For trouble-free operation and peace of mind.
Check Stock

WILSON Staff Staff Model Golf Wedge - Men's Right Hand, 54 Degrees, Steel

  • WILSON Staff Staff Model Golf Wedge - Men's Right Hand, 54 Degrees, Steel.
  • SOFT FORGED 8620 CARBON STEEL CONSTRUCTION​: 8620 Carbon Steel provides a soft touch and incredible feel around the greens.​.
  • PRECISION-MILLED FACE AND “ADVANCED SPIN” SCORELINES​: Machine-engraved score lines in the precision- milled face feature a higher density pattern for more consistent contact with the ball. The result is maximum spin and control on every shot.​.
  • TOUR INSPIRED, TOUR PROVEN: The Staff Model wedges have been designed alongside our world-class tour players who provide direct feedback on design and performance. The end result for players at every level is confidence in their short game..
Check Stock

Taylormade MG3 Black HB

  • Wedge technology has evolved. The new Milled Grind 3 features RAW Face Micro-Ribs, engineered for added face texture to deliver more spin around the greens, especially on partial shots..
  • The face rusts over time to preserve consistent spin while the rest of the head maintains its original finish. Omitting plating from the face and grooves allows Milled Grind 3 wedges to have more precise groove geometry, optimizing spin and feel..
  • Raised Micro-Ribs are positioned between full grooves for added texture on the face. They are designed to increase spin and improve performance on shots around the green..
  • Milled Grind soles ensure precision where it matters most. The milling process maximizes consistency, maintaining tolerance levels difficult for a human to repeat..
  • Sharper, deeper, narrower grooves, with radii engineered for more greenside spin and optimal spin in wet conditions..
Check Stock

TaylorMade MG3 Black HB

  • Wedge technology has evolved. The new Milled Grind 3 features RAW Face Micro-Ribs, engineered for added face texture to deliver more spin around the greens, especially on partial shots..
  • The face rusts over time to preserve consistent spin while the rest of the head maintains its original finish. Omitting plating from the face and grooves allows Milled Grind 3 wedges to have more precise groove geometry, optimizing spin and feel..
  • Raised Micro-Ribs are positioned between full grooves for added texture on the face. They are designed to increase spin and improve performance on shots around the green..
  • Milled Grind soles ensure precision where it matters most. The milling process maximizes consistency, maintaining tolerance levels difficult for a human to repeat..
  • Sharper, deeper, narrower grooves, with radii engineered for more greenside spin and optimal spin in wet conditions..
Check Stock

Vandoren SM711 AL3 Optimum Series Alto Saxophone Mouthpiece

  • 100% precision-milled, vintage-inspired jazz mouthpieces.
  • The Select Jazz line is milled not molded, from solid rod rubber, using D’Addario’s precise computer-controlled mouthpiece-making technology.
  • Classic sound and response, with even intonation across the entire range of the saxophone.
  • Features medium chambers and facing lengths.
  • Available in three tip openings: 5, 6, and 7.
Check Stock

TaylorMade Milled Grind Hi Toe Raw Wedge Mens Right Hand Steel Stiff Standard Bounce 56.10

  • Thick-Thin Design. A thinner topline along with additional mass redistributed nearer to the top of the spine allows engineers to optimize CG location for precise flight and enhanced feel..
  • New Aged Copper Finish. Slightly tarnished look creating a classic rich reveal..
  • Milled Grind. Milled Grind wedges ensure precision where it matters most. The process maximizes consistency when crafting each sole for repeatable performance and turf interaction..
  • Raw Face Technology designed for increased spin, precision and feel as well as laser etching. The face will rust over time and was engineered to preserve consistent spin throughout the life of the wedge..
  • Full Face Scoring Lines. Designed to ensure consistent ball contact out of the deep rough and increase spin on off-center strikes..
Check Stock

KAISH Tenor Saxophone Mouthpiece with Ligature, Reed and Plastic Cap

  • 100% precision-milled, vintage-inspired jazz mouthpieces.
  • The Select Jazz Mouthpiece line is milled not molded, from solid rod rubber, using D 'Addario's precise, computer-controlled mouthpiece making technology.
  • Classic sound and response, with even intonation across the entire range of the saxophone.
  • Features medium chambers and facing lengths.
  • Available in four tip openings: 6, 7, 8, and 9.
Check Stock

TaylorMade Milled Grind Hi Toe Raw Wedge Mens Right Hand Steel Stiff Standard Bounce 60.10 , Copper/Raw

  • Thick-Thin Design. A thinner topline along with additional mass redistributed nearer to the top of the spine allows engineers to optimize CG location for precise flight and enhanced feel..
  • New Aged Copper Finish. Slightly tarnished look creating a classic rich reveal..
  • Milled Grind. Milled Grind wedges ensure precision where it matters most. The process maximizes consistency when crafting each sole for repeatable performance and turf interaction..
  • Raw Face Technology designed for increased spin, precision and feel as well as laser etching. The face will rust over time and was engineered to preserve consistent spin throughout the life of the wedge..
  • Full Face Scoring Lines. Designed to ensure consistent ball contact out of the deep rough and increase spin on off-center strikes..
Check Stock

D’Addario Woodwinds Select Jazz Tenor Saxophone Mouthpiece, D6M (MKS-D6M)

  • 100% precision-milled, vintage-inspired jazz mouthpieces.
  • The Select Jazz Mouthpiece line is milled not molded, from solid rod rubber, using D 'Addario's precise, computer-controlled mouthpiece making technology.
  • Classic sound and response, with even intonation across the entire range of the saxophone.
  • Features medium chambers and facing lengths.
  • Available in four tip openings: 6, 7, 8, and 9.
Check Stock

12/Pack Assorted Rainbow Colors Trauma Paramedic Shears Scissors 7.5 Made of Premium Quality Stainless Steel - For EMT Nurses Crafting Tailoring Doctors Firefighter + more

  • HEAVY DUTY: Made of Premium Grade Stainless Steel, precision sharpness, razor sharp edges and milled serrations for cutting through the toughest....
  • PREMIUM QUALITY STAINLESS STEEL BLADES: These Shears are made with high quality corrosion resistant stainless steel blades for peak durability and....
  • CUT THROUGH THE TOUGHEST MATERIALS WITH EASE: Each pair of Heavy Duty Trauma Shears has milled serrations on the blades for precision sharpness that....
  • COMFORT GRIP: The non-slip high impact contoured handles with large finger openings are specially created to stand up to rough treatment and autoclave....
  • IDEAL FOR PROFESSIONALS OR AT HOME USE: Our EMT Shears are designed to be efficient for professionals using durable, long lasting materials but are....
Check Stock

Set of 6 Trauma Paramedic EMT Shears Scissors 7.25 - Made of Premium Quality Stainless Steel - Ideal Gift for EMT Nurses doctors Firefighter and more

  • HEAVY DUTY: Made of Premium Grade Stainless Steel, precision sharpness, razor sharp edges and milled serrations for cutting through the toughest....
  • PREMIUM QUALITY STAINLESS STEEL BLADES: These Shears are made with high quality corrosion resistant stainless steel blades for peak durability and....
  • CUT THROUGH THE TOUGHEST MATERIALS WITH EASE: Each pair of Heavy Duty Trauma Shears has milled serrations on the blades for precision sharpness that....
  • COMFORT GRIP: The non-slip high impact contoured handles with large finger openings are specially created to stand up to rough treatment and autoclave....
  • IDEAL FOR PROFESSIONALS OR AT HOME USE: Our EMT Shears are designed to be efficient for professionals using durable, long lasting materials but are....
Check Stock

Chapman MFG 6810 Standard +Star Screwdriver Set - 27 Pieces - Includes Standard Allen Hex Star Phillips & Slotted Bits Complete Set Offers 24 USA Made Insert Bits Yellow Hard Case

  • 24 SCREWDRIVER BITS - Versatile and durable compact screwdriver set with 24 interchangeable screwdriver bits.
  • Features 11 Standard Allen Hex Bits, 7....
  • AMERICAN QUALITY TOOLS - USA made and machined from USA steel.
  • Non magnetic, ball detent holds bit in place.
  • STANDARD SCREWDRIVER SET - Featuring 24 standard screwdriver bits of different sizes, designed to break before damaging screw, plus Mini Ratchet,....
  • UNSURPASSED VERSATILITY - Precision milled to tight tolerances with flat edges, sharp corners, and no burrs for snug screw fit.
  • EVERYTHING YOU NEED - Insert bits fit screws commonly found on Appliances, Lighting and Fans, Cabinet Hinges and Hardware, Electronics, Furniture,....
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock