Top Pre assembled Hotend Reviews

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

It's 100% Creality Original Upgrade Assembled Extruder Hotend..
Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
With more terminal housing and pins as spare parts, in case fail installation and waste..
MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

...p to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram..
Wide Compatibility – The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..

Check Stock

Dragonfly Taichi Hotend Dual Extrusion 2 in 1 All Metal Hot End Double Feed 2 Color 2 Filament Extruder for CR10 Ender 3 Pro V2 Ender 5 Pro Plus CR10 V2 3D Printer Part

☀️【2 in 1 Dual Extrusion Hotend】Taichi hotend features integrated double feed port design, which meets the needs of two filaments or multi....
☀️【All Metal Hotend】The heatbreak of TAICHI hotend is made of 0.25mm thin-walled titanium alloy for high wear resistance, great heat....
☀️【Quick Nozzle Changing】The titanium alloy support screws of TAICHI hotend can reach low heat conduction and excellent heat insulation so as....
☀️【Conical All Metal Heatbreak】TAICHI’S conical designed all metal heatbreak fit closely with heatsink so that it’s heat dissipation is....
☀️【Compatible with All Filaments】TAICHI hotend is compatible with all thermoplastic filament including typical composite fiber filament like....

Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
4 24V high speed fan, lose heat quickly and efficiently.
nozzle and tube connect seamless, prevent material leaking and blocking..
5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.

Check Stock

Haldis 3D Printer Bowden Extruder Hotend Kits,Upgraded 24V Volcano All Metal V6 J-Head Extrusion Hot End Parts with 5 Pieces Brass Nozzle + 3 Cooling Fans 3010 for All 1.75mm E3D V6 Makernot

【UNIVERSAL UPGRADED V6 HOTEND KIT】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
HotEnd featuring an all-metal design with....
【STANDARD BRASS NOZZLE】: Nozzles are made of high quality brass,Heavy duty and provide a long service life.Easy to install and change.include 5....
【PREMIUM COOLING SYSTEM】: 24V / 40W heating, the temperature can reach up to 350 ° C，and we adopt 3 pieces cooling fans (30*30*10mm).Multiangle....
【ASSEMBLY NEEDED】: The package include all parts.No-Solder, No-Tape, No-Adhesive Assembly And Maintenance，Easy to Install..
【QUALITY GUARANTEE】: We are committed to providing more reliable product and better customer service to our customers,if you aren't 100%....

Check Stock

Sovol SV02 3D Printer with All-Metal Dual Extruder Silent Board TMC2208 Drive Meanwell Power Supply Tempered Glass Bed & 4.3 inch Touchscreen 240 x 280 x 300 mm

【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the....
【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function.....
【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware....
【4.3 '' Color Touchscreen】 With an intuitive and responsive interface that allows you to change and monitor relevant settings for direct control....
【More Charactoristics】 Removable glass plate, resume printing function, dual Z-axis design, support Bl-Touch add-on, support TF card and USB....

Check Stock

BCZAMD 3D Printing Upgrade Parts Ender 3 Direct Drive Extruder Conversion Kit Complete Set Requires No Firmware or Wiring Modification fit for Ender 3/ Pro/Ender 3X/ CR10 Series Printer Accessories

1. Fits perfectly on your creality series printers, include Ender 3 Pro, Ender 3, Ender 5, CR10.
2. Material: no 3d printed parts, all metal main plate, comes with a kit, so you need to assemble by yourself, install instruction, please reference....
3.This kit is a great little light kit that moves your extruder from the side with a bowden line to the top of your hot end. It obviously adds the....
4. Work well for most filament, expecial very good for flexible filaments, had no problem printing TPU with this setup..
5. Compatible with most extruder hotend, but you need to print a printing before install on V6 hotend, please reference on thingiver..

Check Stock

Bilway 3D Printer Ender 3 v2 Printer Creality Ender 3 v2 3D Printer with Silent Mainboard Meanwell Power Glass Bed and Resume Printing 220x220x250mm Ideal for Beginners

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more....
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly....

Check Stock

Creality Spider All Metal Hotend Up to 500℃ High Temperature High Speed 3D Printer Extruder Hot end Kit Compatible with Ender 3 Ender 3 pro Ender 3v2 Ender 5/6/7 CR-10 Series

【 Up To 500℃ High Temperature Resistance, Compatible With Most Filaments】 With scientific structure and material selection, Creality Spider All....
【250mm/s High-Speed Printing, Save Your Time】The hotend heating block is mainly composed of copper alloy material which has the advantage of....
【No Clogging ,Smooth Extrusion】 With fluid polishing process, the Ra ≤ 0.3 roughness inner wall enhances fluidity of filament. Copper alloy....
【Simple Installation】Fix by screws or built-in joints, installation is a breeze. This 3D printer hotend kit includes Spider Hotend*1,....
【Wide Compatibility】Creality Spider hotend Fits for Ender 3,Ender 3 Pro,Ender3v2, Ender 5, Ender 2, Ender 6, Ender 7, Creality CR-10 ,CR-10S....

Check Stock

Anycubic Kobra Go, 3D Printer Auto Leveling with 25-Point Precise Leveling, Upgrade FDM 3D Printers for Beginners Easy to Remove Model and Resume Printing 220x220x250mm

...ximum printing speed of 100mm/s, quick to turn ideas into reality. The print size is 8.66x8.66x9.84in / 250 x 220 x 220mm, compared to its predecessor Anycubic Mega S, the print volume has increased by 34.4% to reach 12.1 liters. The size of a standard size 5 soccer..
Fast Assembly & User Friendly: For the assembly tutorial, we have detailed video guidance and user manual guidance, allowing you to enjoy the assembly process and the sense of accomplishment of a successful challenge. The step-by-step assembly process allows you to understand various modules and parts of the ANYCUBIC KOBRA GO in more detail..
More Function: ①Smart sensors, No more fear of accidents: The power-off resuming and the filament run-out detection (Needs to Be Purchased Separately) avoid printing failure caused by unexpected power-off or filament run-out, which can reduce the waste of resources and time effectively. ②Knob adjustment is more convenient: Compared to using a screwdriver, the knob XY axis tensioner is easy to adjust the belt tension, which can be operated with hands only without tools. ③New User screen: ANYCUBIC KOBRA GO upgrades the user experience with a newly designed....

Check Stock

MALYAN M300 Mini Delta 3D Printer - Fully Assembled FDM 3D Printers for Kids and Beginners, Free Sample PLA Filament and MicroSD Card Preloaded with Printable 3D Models, Printing Size 110x120 mm

...for numerical adjustment and axis movement, smooth and simple operation, even novices can get started quickly. Larger icons, clear and concise instructions, and overall quality of life improvements make this 3D printer ideal for beginners and professionals alike..
【Fully Assembled】Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include a MicroSD card with preinstalled models, so you can start printing right out of the box!.
【Compact Desktop Design】Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk. You can print from a Windows or Mac PC using a USB connection or can print from 3D model files stored on a MicroSD card, Compatible with Cura, Repetier, and other software..
【All Metal Hotend for Stability】The all metal hotend is capable of superior performance and prevents wear and tear, while the heat brake design allows for efficient dissipation of heat. The sturdy metal base and side filament holder make it easy to use and change the filament..

Check Stock

Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Vyper/Voxelab Aquila

1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend..
2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.【Note】If have any using problem. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours..

Check Stock

Industrial Grade Mosquito Hotend by Slice Engineering | Best Professional 3D Printer Upgrade | Eliminate Heat Creep | Print PEEK & PC | Bimetallic Heat Break | Stops Clogging & Improves Resolution

✔️ ELIMINATES HEAT CREEP – The bimetallic heat break conducts 85% less heat than a standard threaded heat break!.
✔️ 500°C TEMPERATURE RATING – With a temperature rating this high, our Mosquito Hotend will allow you to print virtually any available....
✔️ ONE-HANDED NOZZLE CHANGE - The rigid structure allows for the simplest nozzle procedure of any hotend on the market..
✔️ MODULAR AND ADAPTABLE – Fits almost any FFF/FDM 3D printer with widely available adapters..
✔️ IDEAL FOR MULTI-EXTRUSION SYSTEMS – The Mosquito Hotend’s tiny form factor and low mass (41 g) makes it ideal for multi-extrusion systems..

Check Stock