Top Ppr Extrusion Reviews

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

Rotary #10157-6\ x 1\ x .669\ Bore Composite Flat Idler Pulley

  • ... PBA19542LT PB1842LT PB185H42LT CO17542LT PB18H42LT.
  • This 532173437 Idler Pulley Fits for Poulan Decks: HD17542 PBA19542L PBA19542LTX PD17542LT PO14542B PO14542C PO14542D PO14542E PO14542F PO14542LT PO17542LTX PO17542STD PO19542LT PR17542STA PR17542STB PR17542STC PD185H42ST PRK17H42STB PR1742STA DB24H42YT PB18542LT PPR20H42STC PD1842ST PR1842STA HD1842 PPR1742STC PO165H42C PB185H42LT CN1842ST PK1942LT PR16H42STA PR185H42STA.
  • WeedEater WE165T42A WE14542L WE16542D WE16542E WET2242STB S165H42A.
  • Outer diameter : 3-3/4" , Flat outer diameter : 2-7/8" , Flat width : 1.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Gizmo Dorks 3D Printer Filament 3mm (2.85mm) 200g, 4 Color Sample Pack - Flexible Red, Polycarbonate Blue, Nylon Clear, PETG Green

  • Bundle contains 4 sample spools each containing 200 grams of different 2.85mm diameter 3D printer filament: Flexible TPU Red, Polycarbonate Blue, Nylon Clear, and PETG Green.
  • Flexible TPU red filament has a shore hardness of 95A and can be used to print different flexible parts such as cellphone cases.
  • Polycarbonate blue 3D filament is extremely hard and durable as polycarbonate is used in many applications such as bullet proof glass.
  • Nylon 3D printing filament is a great engineering filament that has great wear resistance that can make specialty printed parts.
  • PETG filament combines all the benefits of PLA with ABS producing printed parts that are both strong and flexible.
Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

  • Premium Set: PVC cutter*1 & replacement blade*3.
  • Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
  • Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
  • Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.
Check Stock

10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories

  • Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
  • 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
  • Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
  • Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
  • T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

  • Compatible Models: This Extruder Motor kit is compatible with Creality 3D printers Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10/CR-10S and etc..
  • All-metal Extruder -- Stronger extrusion force with stable performance.
  • metal extruder with high quality aluminum alloy has stronger extrusion force,....
  • Smoothly and precisely -- The extrusion gear with high density is closely matched with U-shaped bearing. The even extrusion forces avoids the slippage....
  • High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which....
  • Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step..
Check Stock

Body-Solid Powerline PLA200X LAT Attachment for use with PPR200X Power Rack

  • Lat attachment for use with the PPR200X Power Rack from Powerline.
  • One-inch diameter weight posts accommodate standard or Olympic weight plates.
  • Nylon coated, aircraft quality 2200-pound test cables.
Check Stock