Top Pp Filament Reviews

3Dman Filament Welder Connector Broken Filament Connector Sensor for 1.75mm Filament for Ender 3 V2 Ender 3 Pro Ender 3 Series Ender 5 Series CR10 Series Vyper Series and Other 3D Printers Red

Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a....
Print models in multiple colors: different colors of the same filament can be connected to print out a multi-level model..
Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc. for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro,....
NOTE: The nylon displayed in pictures is just for reference ,NOT included in the package..
NOTE: Filament often lose water and become brittle when exposed to the air for a long time. In order to prevent the filament from becoming brittle,....

Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....

Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....

Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
【3D Petg Filament ACCURACY & CONSISTENCY】....

Check Stock

ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Green

1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations..
2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface..
3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens..
4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger..
5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface..

Check Stock

Inland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools

PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....

Check Stock

Filament Dryer Box,Upgrade FilaDryer S2 Dry Box,SUNLU Dry Box for 3D Printer Filament,Keep 3D Filament No More Brittle/String/Poor Adhesion,Large-Size Touch Screen,Real-time Humidity Display,Black

【Dryer box keep filament dry, 360° even heating】SUNLU S2 filament dryer box, say goodbye to poor 3D printing by damp filament.Dust-free, moisture-free, 360° heating. SUNLU S2 filament dryer has two heat-sinks on top and bottom to provide even heating. Keep the 3D printer filament dry,no more brittle/string/poor adhesion,print smoothly..
【Adjustable temperature up to 70℃, Adjustable time】Users can adjust the temperature of the dryer box according to different 3D filament types, ambient temperature, humidity and other factors. Adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
【Large LCD touch screen, easy to operate dryer box】S2 dryer box has a 3.42*2.87-inch LCD touch screen, touch reaction time less than 0.1 seconds. Dryer box with sensitive response, provide the tablet-like smooth experience. One-Click operation, provide suggested parameters for different 3D filament. Easy operation, make the filament keep drying during 3D printing..
【Real-time humidity display, visualization of filament drying】S2 dryer box has a high-precision humidity detection sensor, displaying real-time humidity ins....

Check Stock

SUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75

① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..

Check Stock

PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent

①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..

Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....

Check Stock

AMOLEN 3D Printer Filament Glow in The Dark Multicolor PLA Filament, 3D Printing Filament Color Change in 10 Meters, 1KG

GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant....

Check Stock

AMOLEN 3D Printer Filament,PLA Filament 1.75mm,Shiny Glow in The Dark,Starry Sky 3D Printing Filament,1kg

✔GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
✔UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔GLOW LIKE STARRY SKY - When not glow, the filament shows transparent and black with some spots. After charge, the spots will glow in the dark and shiny like starry sky. You can change the fulling to change the density of the stars. Higher filling will get more shiny spots..
✔VACUUM & REUSABLE BAG - Vacuum pac....

Check Stock

SUNLU S9 Plus Large 3D Printer, FDM 3D Printers with Filament Dryer Integration, Clog Detection, Auto Leveling, Silent Motherboard, Open Source, Touch Screen, Big Printing Size 310x310x400mm

【8 Rolls of 0.25kg 1.75mm PETG Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PETG filament.Color:Black+White+Grey+Transparent+Blue+Green+Red+Orange.The design of 250g PETG filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【SUNLU Toughness-enhanced PETG Filament】SUNLU 3d filament PETG 1.75mm is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It’s about as stiff as PLA. PETG 3d filament suggest printing temperature is 220-250°C – Base Plate Temperature: 70-80°C if no glue applied..
【High Precision +/- 0.02mm Tolerance PETG filament】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free..
【High Compatiblity & Vacuum Pack PETG Filament】Compatible with ....

Check Stock