Top Pp Camlock Coupling Reviews

Gloxco Aluminum Type DA Cam and Groove Hose Fitting, Reducer, 3\ Female Camlock x 2\ Male Camlock (CAM-3020-DA-AL)

  • Type DA Camlock (Cam and Groove), Reducer.
  • 3" Female Camlock Adapter x 2" Male Camlock Coupler.
  • Aluminum Body: Corrosion and abrasion Resistant, Light Weight.
  • NBR (Buna-N) Seal, Stainless Steel Cam Arms.
Check Stock

SAFBY 2 PCS Aluminum Global Type F Cam and Groove Hose Fitting,1.5“ Plug x 1.5” NPT Male with 2 PCS 1.5 Camlock Gasket Fitting (1.5\)

  • Aluminum Camlock (Cam and Groove) Fittings.
  • Thread Size - 1.5 inch Male National Pipe Thread.
  • Pack of 2 Fittings and 2 PCS 1.5" Camlock Gasket Fitting.
Check Stock

Quest Q40 Metal Detector with 11x9 TurboD Waterproof Search Coil

  • 13kHz VLF (Very Low Frequency) Induction Balance, Fast Release Camlock 3 Sections Straight Rods Extendable From 80CM to 130CM, Built-in Rechargeable 2000mAh Li-Po Battery, 9×11″(22.5x28cm) Wide Scan TurboD Waterproof Coil, 5 Searching Programs.
  • Built-in Speaker, Wireless/Wire Headphone LCD, Display: 60x70mm With Backlight, All Metal, Discrimination, 6 Tones Selectable.
  • 1350g with Raptor coil, 1050g with Blade coil, Battery Life: Up to 20Hrs on Wireless, 30 Hrs on Speaker, Operating Ambient Temperature: 32° to 95° F (0° to 35° C) Non-operating Temperature: -4° to 113° F (-20° to 45° C).
  • Handle: Ergonomic with anti-slip dotted pattern surface, Armrest: Made of Robust PP Material, Ergonomic Design.
  • Ground Balance: Automatic or Manually, Metal ID: 99 Metal I.D. for Target Identification.
Check Stock

Latin Percussion Camlock Bongo Stand

  • Patented LP Camlock Bongo Stand is the most convenient bongo stand made.
  • Unique camlock tensioning system and super strong nylon strap securly hold the bongos by the center block for quick, easy set-up and stable playing.
  • Bongos rest on a rubber lined, L-shaped seat to protect and add stability.
  • Chrome plated steel construction, double braced legs, large rubber feet.
Check Stock

Nerf B8233 Rival Flashlight Grip

  • Includes red dot sight, grip, camlock, and instructions.
  • Compatible with Nerf Rival tactical rails.
Check Stock

Giordana Women's Body Clone FR-Carbon Short Sleeve Cycling Jersey, White, S

  • constructed to fit the body like a second skin on the bike.
  • front and back center panels are made of ultralight Asteria fabric.
  • shoulders are perforated Aerostat for incredible ventilation in the riding position.
  • Three rear pockets with a fourth reflective CamLock zippered compartmen.
Check Stock

Quafwia 2 pcs Aluminum Camlock (1\ part D) Cam & Groove Hose Fittings, cam Lock Fittings Female Coupler x Female NPT Thread cam Lock Fittings camlock Coupling (1'')

  • NPT threads are designed specifically for the U.S. market.
  • A Camlock D with a Gasket, which has been assembled in the Camlock.
Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • 003c/b003e[EASILY USE]:003c/b003e It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
  • 003c/b003e[GOOD SERVICE]:003c/b003e Our aim is to provide durable hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

Gloxco 1-1/2\ x 25′ Blue Lay Flat PVC Hose Assembly with Aluminum Cam and Groove C and E Fittings used with a Sump Pump or Water Transfer Pump for Water Discharge, Pool Drain or Backwash

  • 1-1/2" ID, 2-3/8" Flat Width, Discharge Hose, 25 Ft Length.
  • Blue PVC Hose with 2 Spiral Plies Reinforcement.
  • 1-1/2" Female Type C Camlock x 1-1/2" Male Type E Camlock.
  • Aluminum Cam and Groove Fittings, Installed with 2 Galvanized Steel Bands per Side.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...irectly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
  • [GOOD SERVICE]: Our aim is to provide durable hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...ectly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • [EASILY USE]: It can be easily connected, after Type F is connected to the pump, just slide type F male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
  • [GOOD SERVICE]: Our aim is to provide durable hose. Any questions, please feel free to contact us, I will provide solutions within 24 hour..
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

American Standard AS738756-0070A Champion 4 Tank to Bowl Gasket, 1 pack, Black

  • BEST-IN-CLASS: The American Standard toilet bowl to toilet tank coupling kit ensures there are no surprise leaks with your toilet.
  • PERFORMANCE: American Standard toilet parts provide durability for bathrooms for years to come. With the Champion 2 coupling kit, expect reliable performance and durability.
  • COMPATIBILITY: Before you install, confirm compatibility by ensuring that your toilet will accept this toilet bowl to toilet tank coupling kit by checking repair part information.
  • FLAWLESS DESIGN: Designed to keep the toilet bowl and toilet tank connected with no leaks, this American Standard coupling kit is easy to install and is durably constructed.
  • INCLUDES: Coupling kit includes the toilet tank gasket, speed connect tank to bowl bolt kit with two 5/16 in. hex nuts, captive washers and speed connect bolts, two grommets, a Fluidmaster coupling nut, washer, and a close coupling washer.
Check Stock