Top Power Supply psu Reviews

Cable Matters 2-Pack 8-Pin PCIe to Molex (2X) Power Cable 4 Inches

  • PCI express power cable adapter connects a PCIe video card with an 8 pin connector to a power supply with two spare L4 Molex power connections.
  • Check that your PSU is rated to power the video graphics card.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power.
  • Dual Molex connectors are designed to connect to separate rails on different Molex daisy chains to power a PCIe video graphics card from an older PSU.
  • 8 pin PCIe to Dual Molex female to male cable provides a convenient solution for video graphics card power with two Molex connectors for GPU cards that require more power.
  • Sturdy graphics card power cable has male Molex connectors and a female PCI connector with a latch to prevent accidental disconnections.
  • Video graphics card compatible with graphics cards from popular manufacturers such as EVGA GeForce, Gigabyte, Sapphire, and XFX.
Check Stock

2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case

  • 【2000-2500W Mining Power Supply】 The mining power supply is mainly designed for cryptocurrency mining. The power supply has ten 6 pin power leads. Note: The power supply cannot be used for ASIC miners with protocols or software..
  • 【Single channel PSU parameters】 The miner PSU can be used in 110V-230V. Input AC110V output rated power is 2000W. Input AC220V, the output rated power is 2500W. Power efficiency is 80% at 110V, Power efficiency is 90% at 220V. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption..
  • 【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
  • 【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..
Check Stock

Rosewill Computer Modular Power Supply Modular 80 Plus Gold 650W PSU for PC/Desktop/Gaming Computer Silent 135mm Fan ATX12V/EPS12V SLI & Crossfire Ready - Capstone 650

  • 80 PLUS GOLD: The Capstone 650 Watt power supply is 80 PLUS Gold certified and delivers up to 90% efficient performance under typical loads. This high....
  • 5 YEAR WARRANTY: The Capstone gaming PSU is backed by 5 years of warranty. Your power supply unit will operate according to its technical....
  • SILENT OPERATION FAN: With Auto Fan Speed Control, the PSU’s 135mm fan turns slowly at low temperatures, reducing power consumption and fan noise to....
  • MODULAR PSU: A semi-modular PSU design comes with only the essential cables pre-attached. This allows for some customization of additional cables,....
  • Over Temperature/Current/Voltage/Power Protection, Under Voltage Protection, and Short Circuit Protection provide maximum safety to your critical....
Check Stock

250 watt Pico PSU ATX Switch PSU Car Auto Mini-ITX Power Supply with Adapter Board for Computer Mainboard and car/Motorcycle

  • Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
  • 250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
  • Pico power supply Short-circuit protection: output shut down when short-circuit.
  • DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
  • The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
  • Perfect DC PSU for mini ITX Motherboards.
Check Stock

3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester

  • 24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
  • 24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
  • 24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
  • Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
  • What You Get: 3x 24-Pin power supply jumper,.
Check Stock

Blucoil 9V 670mA Power Supply with Slim US Plug AC Adapter Center Negative - Compatible with BOSS Behringer DigiTech Jim Dunlop MXR Nobels NUX Roland TC Electronic Xotic Zoom Effects Pedals

  • POWERS STANDARD LOW-CURRENT PEDALS - This Blucoil Power Supply provides 9V 670mA output for different effects pedals with a negative-tip center....
  • SAY GOODBYE TO BATTERIES - This power supply unit (PSU) delivers uninterruptible power, so you don't need to deal with batteries dying during....
  • LOWER NOISE INTERFERENCE - Blucoil provides isolated power to your effects pedal, center tip negative keyboard, or other compatible devices. It gives....
  • ACCEPTS 100-240V POWER - This PSU may virtually work in any country since its AC input power is 100-240V ~ 50/60Hz with 0.2A. Please note that this....
  • COMPATIBLE WITH - This pedal power supply plug works with stompboxes and negative tip keyboards/electronics that have the same voltage requirements.....
Check Stock

OUCAXIA PSU 8 Pin to 6+2 Pin PCIE Cable, Male to Male GPU Sleeved Cable for Corsair Thermaltake ARESGAME Pystar Modular Power Supply (65cm)

  • 1. UL1061 18AWG tinned copper core with U-shiped high current terminal & up to 10A, full length 65cm (including interface)..
  • 2. Compatible with CORSAIR Modular PSU: AX1600i(TITANIUM), AXi, AX(TITANIUM & PLATINUM), HXi, HX(PLATINUM & GOLD), RMi, RMX, RM, SF, CS-M, CX-M, TX-M..
  • 3. Compatible with Thermaltake Modular PSU: RGB GOLD, RGB PLATINUM, ARGB GOLD, Toughpower TF1 GF1 PF1..
  • 4. Compatible with ARESGAME Modular PSU: AGK750, AGK850, AGT1000, AGS750, AGS850. Compatible with Pystar PSU: ES850, ES1000.
  • 5. Not compatible with CORSAIR PSU: AX1200, AX(GOLD), HX(BRONZE & WHITE). Not compatible with other brands of modular power supplies!.
  • 6. [ PACKAGE LIST : 1x GPU power cable, 2x cable combs. ] & [ SERVICE : Support 30 days no reason to replace or refund, support 2 year warranty. ].
  • 7. Please insert the [PSU] single male into the Modular Power Supply.
  • Please insert the [PCI-E] into the GPU (graphics card)..
  • 8. Supports power for GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3060, RTX3070, RTX3080 Ti, RTX3090 Ti, RX570, RX580, RX590, RX5700 XT, RX6700 XT, RX6800 XT, RX6900 XT..
Check Stock

MLLIQUEA 2500W Long-line Mining Power Supply, 2U Mining Power Supply for 8 GPU BTC/ETH Rig Miner Machine, 110V-264V PSU with 12000 RPM Violent Fan

  • Eth Mining Rig PSU – MLLIQUEA 2500W mining power supply can be the perfect tool for your cryptocurrency mining equipment. Low noise design, about 75dB. Above 110V, output rated power 2000W, above 220V, output rated power 2500W. Supports simultaneous use of multiple graphics cards. NOTE: The power supply cannot be used for ASIC miners with protocols or software. ASIC miners L3+, S9, S9i, S9K, 851/852, H0.1, H0.3 can be used..
  • Upgrade Material – Our mining PSU shell is made of high-quality steel, sturdy and durable, and reusable. The internal wire adopts an upgraded copper core, which is resistant to high temperatures and is more durable than other types of copper core wires, the external material of the power cord fully protects the wire from wear and tear and prevents the interface and graphics card from being burned, reducing your use cost..
  • Energy Saving – This power supply has a conversion efficiency of up to 89 percent , high efficiency, and energy-saving, using new large-capacity large magnetic ring materials, very stable performance, and can be equipped with more powerful mining machines, which is safer.DC circuit design, and is equipped with multiple power protections, offers your system more reliable and stable output voltages, providing ....
Check Stock

Lian Li STRIMER+ TRIPLE 8-PIN GPU RTX 30 Series Extension Cable Only Compatible with GPU RTX 30 Series

  • Dual PSU Power Supply 24 Pin (20+4) ATX Motherboard Extension Cable, 12 inch/ 30cm..
  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Compatible with 24 pin and 20 pin ATX motherboards (1x 24 pin(20+4) male port and....
  • Both PSU will be powered up by one single motherboard. Use a second PSU to power multiple graphics cards.
  • Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Reminder: If there are pins off, you can plug back in the direction of the slot, does not affect the use!.
Check Stock

Asiahorse 16AWG Pro Power Supply Sleeved Cable for Power Supply Extension Cable Wire Kit 1x24-PIN/ 2x8-PORT (4+4) M/B,3x8-PORT (6+2) PCI-E 30cm Length with Combs(Dual EPS White)

  • ...Two-way performance., and 3 x 8 to 6+2 Pin PCI-E Cable (for GPU). 4 cable combs per each cable for a smooth installation experience. 30cm length, let this white psu cables easily solve the lack of original cable length, beautify the internal space of the chassis..
  • 【Gold-Plated Terminal】The connector of the power supply cables is designed with a unique gold port, which is more durable and can withstand daily wear and tear. 12 times stronger than ordinary power extension cords. These sleeved cables are suitable for all graphics cards on the market and meets the needs of all customers..
  • 【Upgraded 16AWG】These sleeved psu cables use UL1015 16AWG wire with higher copper content to support higher current output, which fundamentally solves the problem of power cord getting hot due to the use of high-power products. The gpu extension cable is perfect for most power supplies, such as RM, RMX RM550x, RM650x, RM750x, RM850x, RM1000x, HX1000 series, etc..
  • 【Ultra High Quality Assurance】New power supply cables is designed and manufactured with premium materials for better looks and sturdiness. A variety of colors are available for you to choose from, DIY your PC freely, match your computer host as you like, and make your computer unique from now on! The br....
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • ...rt 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't include GPU and PSU. You need to install the windows yourself. The panel of case may be scratched during the production process. If you have any questions, please feel free to contact us..
Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

  • 【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
  • 【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
  • 【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
  • 【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
  • 【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..
Check Stock

Bitmain GENUINE Antminer Power Supply APW7 PSU 1800w 110v 220v New Model for S9 or L3+ or Z9 Mini or D3 ASICs w/ 10 Connectors

  • ✴️ Compared to the older Antminer APW3++, the new Antminer APW7+ Power Supply is 1800w with an input voltage of 220v. The PCB uses a conformal coating to prevent damage from high voltage spark discharges on MOS pins, or near high-pressure solder joints when external conductive particles or dust enter the PSU..
  • ✴️ Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so the APW7 has a much longer lifespan than a general use PSU under similar high temperatures..
  • ✴️ One APW7 can power up one S9i, one L3++, one D3, one V9, one X3, one E3 or one Z9 mini. This APW7 has 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors).
  • ✴️ The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering..
  • ✴️ The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration..
Check Stock