Edelmann 70004 Replacement Teflon Seals for Type II Power Steering Systems - 25 Pack
- For use on Type II power steering fittings.
- Seal has a .495 inch I.D. and a .040 inch width.
- soften seal in warm water to ease installation.
Top Power Steering Fittings Reviews
Speedway Motors Universal 1964-72 GM Power Steering Hose Kits
- Power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits.
- Return hose will normally need to be cut to length.
- High Pressure Line: 24" long, Inverted flare fittings, one 5/8"-18 and one 11/16"-18.
- Return Hose: 25" long, 5/8"-18 inverted flare fitting.
- 1964-72 GM Power Steering Hose Kits help complete your project.
Permatex 59214 High Temperature Thread Sealant, 6 ml Tube, Pack of 1 , White
- Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels.
- Lubricates threads for easy assembly and disassembly.
- Parts may be repositioned up to 4 hours after application.
- Suggested Applications: head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering fittings.
6DOF Mechanical Arm Claw Kit, DOF Manipulator Industrial Robot Mechanical Arm Gripper Automatic Robot Parts
- ❖『APPILCATION』-6DOF Manipulator is widely used in college teaching, IDY production..
- ❖『FUNKTION』-Its power system consists of 6 servo motors, which can realize the demonstration of front and rear, up and down and left and right gripping of the robot..
- ❖『STABLE &FLEXIBLE』-All bracket fittings are made of 2mm thick aluminum plate, which effectively improves the stability of the robot itself.The chassis is in the form of a disc, which makes the manipulator turn left and right more flexible and smooth..
- ❖『FEATURE』-Imported cup bearings are used at the steering joints, which not only makes the steering more flexible, but also allows the steering of the steering gear to be at the same center..
- ❖『Service』-If you have any questions about quality and instructions during use, we will be happy to assist you..
Pullmaster Model H12 & M12 F Universal Seal Kit 23123
- Adapter Kit for H Series hydraulic winches (part numbers beginning with 70-).
- Connects vehicle power steering pump as power source.
VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System
- Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
- Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
- Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
- Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
- Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Mile Marker 35-5020-07 35Kit Series Hydraulic Winch Fitting Kit for Ford, up to 1998, 1 Pack
- Adapter kit for hi series Hydraulic winches (part numbers beginning with 75-).
- Connects vehicle power steering pump as power source.
Dometic SeaStar Pro Hydraulic Steering Kit, HK7500A-3
- Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
- Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
- Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
- Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
- Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Mile Marker 35-5020-35 35Kit Series Hydraulic Winch Fitting Kit for 2005-2010 Ford Super Duty, 1 Pack
- Adapter kit for hi series Hydraulic winches (part numbers beginning with 75-).
- Connects vehicle power steering pump as power source.
Winibo ZA0350 Marine Hydraulic Outboard Steering Kit for Outboard up to 300HP with Helm Pump Compact Cylinder Tubing Others
- Outboard Hydraulic Steering Kit Universally Fit Outboards up to 300HP.
- Single or dual Station Steering For Boats Rated To a Maximum of 600HP (Total).
- built-in lock valve to prevent the steering load from feeding back, also includes a relief valve provides over-pressure protection.
- Adjustable O-ring seal fittings simplify the installation process and allow for simple reorientation of the fittings after installation.
- made in high class stainless steel, aluminum alloy and copper， Kevlar reinforced Tubing.
gazechimp Stainless Steel Outboard Steering Link Lever Tie Rod End Set for Marine Boat
- Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
- Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
- Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
- Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
- Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
- Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller
- Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
- The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
- Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
- The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
- We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Edelmann 80422 Steering Return Hose
- Edelmann OE quality power steering hoses and components are crafted from long-lasting, high-performing materials that ensure durability under the harshest conditions on the road.
- OE fit, form, and function ensures ease of installation, correct hose/tube routing and leak free performance.
- Hose construction withstands internal oil temperatures of up to 300 degrees Fahrenheit, ensuring component integrity in high-heat, high-stress operating environments.
- Tubing is coated with a Zinc-Aluminum Alloy with an Aluminum-Rich Epoxy topcoat, and the couplings and fittings are zinc-plated for rust and corrosion protection.
- 16MM Male O-Ring fitting X 3/8 inch I.D. Hose.