Top Power Isolation Reviews

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

UMI AV250 Isolation Transformer 250W Noise Filtering and Surge Suppression and Power Clean 2 Outlet

  • 1. Power Clean: Complete line isolation, Eliminate EMI/RFI line noise and provide clean power for sensitive equipment.
  • 2. Isolation Transformer: Toroidal transformer and Faraday Shield, reduce the static interference from the wall outlet.
  • 3. Power supply: 120V AC input and 120V AC output.
  • 4. 2 outlets: allow to use 2 equipment at same time and a power strip for more.
Check Stock

Frequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz

  • WITH VARIOUS PORTS-- There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
  • POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
  • EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
  • APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base sta....
Check Stock

Tripp Lite IS500HG Isolation Transformer 500W Medical Surge 120V 4 Outlet TAA GSA

  • Complete line isolation, noise filtering and surge suppression.
  • 500 watts, 4 5-15R-HG hospital outlets, 10-ft. power cord with NEMA 5-15P-HG plug.
  • Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line.
Check Stock

Tripp Lite IS1000HG Isolation Transformer 1000W Medical Surge 120V 4 Outlet TAA GSA

  • Complete line isolation, noise filtering and surge suppression.
  • 1000 watts, 4 5 15R HG hospital outlets, 10 feet power cord with NEMA 5 15P HG plug.
  • Internal low impedance isolation transformer with Faraday shield offers 100 percent isolation from the input AC line.
  • Floating AC output prevents noise coupling.
Check Stock

Donner DPA-100 Guitar Pedal Power Supply Adapter 9V DC 1A Tip Negative 5 Way Daisy Chain Cables for Effect Pedal

  • 【9V ADAPTER】OUTPUT: 9V DC, 1A (1000mA), Tip Negative (-) design .INPUT: AC100V-240V, 50-60Hz, 9W.
  • 【live for music.】Stable power supply circuit design, enough power for guitar pedals..
  • 【5 way power chain cables 】5 way cable chain could power on 5 pedals at the same time.
  • 【Fit for Guitar Pedals】Fit for most brands of guitar effect pedals.
  • 【Professional noise isolation performanc】- High quality copper core daisy chain cable with special anti-hum. The professional noise isolation....
Check Stock

Tripp Lite IS1800HG Isolation Transformer 1800W Medical Surge 120V 6 Outlet TAA GSA

  • Complete line isolation, noise filtering and surge suppression.
  • 1800 watts, 6 5-15R-HG hospital outlets, 10-ft. power cord with NEMA 5-15P-HG plug.
  • Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line.
  • Leakage less than 100 microamps. Total harmonic distortion-Less than 1%.
Check Stock

Intona USB 2.0 Hi-Speed Isolator Standard Version Black 1.000VRMS

  • New: auxiliary power input The secondary side may be powered by an external power feed with up to 2000mA for energy-hungry devices via Micro-USB. The....
  • Provides galvanic isolation to the USB bus.
  • Compliant to USB 2.0 Hi-Speed (480 MBit/s).
  • Isolation withstands 5kVrms, Advanced ESD protection (20kV).
Check Stock

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

  • Support international standard IEEE802.3 af & IEEE802.3at(30W).
  • POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
  • PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
  • Support the isolation circuit protection, can effectively protect electrical equipment.
  • Support the short circuit, overvoltage protection.
  • 12V 2A power output, easy to access Poe network for non-PoE terminal.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

LMV339IPT, Comparator Quad 5V 14-Pin TSSOP T/R (50 Items)

  • ✔[High Quality PCB Material]: High quality PCB material, corrosion‑resistant, anti‑oxidation, increased service life..
  • ✔[2-Way]: There should be a certain degree of isolation between the output ports of the power divider, and the input signal of one channel can be divided into equal or unequal signals of two channels..
  • ✔[Large Heat Dissipation Area]: With large heat dissipation area, which can increase the continuous working time..
  • ✔[Good Contact Performance]: The connecting part has good contact performance, which ensures stable working..
  • ✔[Low Loss]: The power divider has wide operating frequency, low insertion loss, high gain, high isolation and stable performance..
Check Stock

BESTEK 150W Power Inverter DC 12V to 110V AC Converter 4.2A Dual USB Car Adapter (Yellow)…

  • Patented Isolation Voltage Protection: BESTEK 150W Car Power Inverter equipped with low voltage and high voltage isolation, provides a perfect protection for your device.
  • Smart Dual USB: 4.2A output USB ports with smart IC that can automatically detect your devices to deliver optimal charging speed up to 2.4A per port, 4.2A total, one 110V AC outlets for charging larger devices such as laptops and tablets.
  • Safety Door & Multi-Protection: AC outlets with built-in safety door protecting kids from unexpected electricity Shock. Safe charging design provides protection against overheating, under and over voltage charging, short circuiting, overloads, and overcharging.
  • Ultra Compact and Lightweight: iphone-sized design ideal for use on vacations, work trips, and camping. 32 inch long cigarette lighter plug makes the power inverter can be plugged into almost any vehicle.
  • ETL certification: BESTEK 150W power Inverter with ETL certification provides 150 watts continuous DC to AC power and 250 Watts of peak power, 18 months warranty.
Check Stock

BESTEK 150W Power Inverter DC 12V to 110V AC Converter 4.2A Dual USB Car Adapter Blue …

  • BESTEK Advantage: America's #1 power inverter brand. Provides 150W continuous DC to AC power and 250W instantaneous power, featuring 1 AC outlet and 2....
  • Patented Isolation Voltage Protection: This certified beast comes with low pressure and high pressure isolation and 25 amps fuse. Perfectly protect....
  • Fast Charging: Powerful 110V AC outlet for charging larger devices such as laptops and tablets. 2 USB ports (0-2.4A) for powering USB compatible....
  • A Must Have for Road Trips: Ultra compact and lightweight, only 3.2 x 2.5 x 1.5 inches, 8 oz+. Space-saving and easy storage. 32 inch cord makes it....
  • 100% Satisfaction: 18-Months Warranty, ETL certification. Durable metal housing provides advanced protection from drops and bumps. Integrated silent....
Check Stock