Top Pound Valve Shaft Reviews

Minn Kota Riptide PowerDrive 70/CP Trolling Motor with Copilot - 24V-70lb-54 MK-1363565

  • Redesigned Mount & Aesthetics Riptide: PowerDrive has been redesigned with new technology, and remodeled to handle the workload that goes along with....
  • Digital Maximizer Motors: With Digital Maximizer provide up to five times longer run time on a single charge by drawing only as much power as you....
  • Advantage Minn Kota Indestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break,....
  • Cool, Quiet, Power: Nothing runs cooler or quieter than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler....
  • Fully Encapsulated Electronics / Sacrificial Anode: Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic....
Check Stock

RAGE Fitness EZ Curl Bar, 47 INCH, Olympic Curl Bar, Nylon Bushings, Alloy Steel With Chrome Finish, 17 POUND, Great for Home Gym, Weightlifting Curl Bar, 400 Pound Maximum

  • CURLED SHAFT AND KNURLING allows for reduced stress on the wrist and better grip overall.
  • STEEL WITH CHROME FINISH and Nylon bushings.
  • THE RAGE FITNESS CURL BAR can be used for various upper body movements such as rows presses and raise.
  • with the addition to lower body movements.
Check Stock

Fire Extinguisher Bracket, 20 lb.

  • Pack of three Amerex 10 Pound ABC Dry Chemical Fire Extinguisher With Aluminum Valve.
  • ALUMINUM VALVE | LIGHT TO MEDIUM DUTY - Anodized aluminum valve body, Anodized aluminum handle and lever (Temperature range from -65° F to 120° F).
  • USER-FRIENDLY - Easy and more economical to maintain and service, Large loop pull pin, Bar coded and bilingual labels.
Check Stock

Fire Ball Hampton Bay Briarglen with Tree Branches

  • Pack of three Amerex 10 Pound ABC Dry Chemical Fire Extinguisher With Aluminum Valve.
  • ALUMINUM VALVE | LIGHT TO MEDIUM DUTY – Anodized aluminum valve body, Anodized aluminum handle and lever (Temperature range from -65° F to 120° F).
  • USER-FRIENDLY – Easy and more economical to maintain and service, Large loop pull pin, Bar coded and bilingual labels.
Check Stock

CAP Barbell 300 LB Cast Iron Olympic Weight Set with 7’ Olympic Bar, Black

  • 300 lb. weight set – includes one 7-foot Olympic barbell, two chrome spring collar Olympic clips, two 45-Pound, two 35-pound, two 25-pound, two 10-pound, four 5-pound, and two 2.5-Pound Olympic weight plates.
  • Durable cast iron – Olympic weight plates crafted from solid cast iron with a machined center hole and coated in a durable, Black baked enamel finish.
  • Raised silver number help to easily identify weight size.
  • 7-Foot Olympic bar – crafted from solid cold rolled steel with a Black oxide finish.
  • Medium-depth knurling & center knurl for secure grip.
  • rotating sleeves with bushings to reduce pressure on forearms.
  • Versatile uses – get a full body workout or target specific muscle groups.
  • great for powerlifting and strength training routines.
  • great set for advanced or beginner weightlifters.
  • Specs – 30-day Manufacturer limited Warranty.
Check Stock

Weber 66754 Set of 2 Lighted Main Burner Control Knobs for Genesis II LX (Model Years 2017 and Newer).

  • Genuine Weber part 66754 Set of 2 "lighted" main burner control knobs for Weber Genesis II "LX" (model years 2017 and newer)..
  • The 2-7/8" diameter knobs feature a gray plastic body with chrome trim, translucent skirt for emitting light, a red position indicator and a rain boot on the valve stem shaft. The valve stem shaft extends 3/8" beyond the bottom edge of the knob..
Check Stock

Steel Drilling Hammer (2 LBS)

  • Overall Dimensions: 10-1/4" x 3-1/4" x 1-1/4".
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

Himore | 3000 PSI Pressure Washer Pump, Universal, 3/4' Shaft fits Many Troy Bilt, Honda, Excell, Husky & Generac Models

  • Fits Honda Excell units with 3/4″ shaft only. Some Excell units have the 7/8″ shaft and this pump will not work..
  • UNIVERSAL PUMP – FITS MANY MAKES AND MODELS!.
  • HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ..." Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 1 Diverter Valve, 2 Shaft O-Rings, 1 Cap O-Ring, 1 Knob (black).
  • Aftermarket Replacement For Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

ATIE Neverlube Valve Cover/Cap 4606 with O-ring 1132+ and Shaft O-ring R0487100 Replacement For Zodiac Jandy Black/Gray 3-Way/2-Way Valve Covers 4606+, 1303+, 4734+, 1304+

  • Replace/Fit Jandy black 3-Port valve cover 4606+ and gray 3-Port valve cover 1303+.
  • Also Replace/Fit Jandy black 2-Port valve cover 4734+ and gray 2-Port valve cover 1304+.
  • Package Included: 1 Valve cover/cap, 1 Valve O-ring, and 2 Shaft O-rings.
Check Stock

NOS NSJ0301 3-Ton Aluminum Service Jack

  • Ultra lightweight aluminum construction at just 58-Pound. Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability.
Check Stock