Top Portable Oil Extractor Reviews

OKOOLCAMP Oil Change Pump Extractor -12V 60W Marine Oil Extractor Pump for Boat Truck RV ATV Diesel Scavenge Suction Pump 60W

  • Quick and Efficient- Oil Extractor Pump, a good helper for quick and clean oil changing. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃):....
  • Premium Quality-Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance. Fully enclosed....
  • Easy to Use-Install the oil transfer pump inlet and outlet hoses, tighten the hose clamps, connect the power clamps to the vehicle battery and turn on....
  • Operation Tips-Except ENGINE OIL/DIESEL/BIODIESEL, this oil extractor CAN NOT extract WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. Before use,....
  • Widely application-This professional oil suction pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving....
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [HIGH QUALITY AND LEAK-FREE]VICRING Oil extractor pump is made of high quality plastic material, which is robust, strong and long-lasting. Fluid extractor exterior has a clear and distinct scale for easy checking of the liquid balance.Oil transfer pump has a capacity of 200cc..
  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or....
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • ...ge pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly without lying under the car. It is an ideal oil change pump extractor equipment. Efficient, fast and labor-saving..
  • 【Wide Application】Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in mo....
Check Stock

SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

  • 【 Work Freely 】 Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs..
  • 【 Easy to Use 】 Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress..
  • 【 Hominization Design 】The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling..
  • 【 Wide Applications 】 EWK oil extractor is designed to drain old fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. It's also works perfectly for low viscosity fluids such as trapped water or coolant. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor..
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

CoCoyes Colinea Oil Change Pump Extractor 12v 80w Marine Oil Change Pump and Electric Oil Pump Great Choice for Oil Changes in Car Ship Truck Motorcycle grey

  • [Quick Oil Change Pump]The oil pump extractor is an ideal device for quick and clean oil changes. DC 12V 80W has enough power, you only need to clamp....
  • [Handle Portable Oil Pump] Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice. The....
  • [Easy To Use]The red clip is connected to the car battery ''+'', the black clip is connected to the car battery ''-'', tighten the hose clamp to....
  • [Multiple Uses]Professional oil suction pump can change motor oil and diesel for ships, cars, motorcycles, trucks, RV, ATV and other vehicles (such as....
  • [Clean and Tidy]An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent....
Check Stock

BOYISEN Oil Change Pump Extractor 12v 60W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Yellow)

  • ...ort and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use..
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit. Overheat protection will cut off the power supply automatically for safety.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. A screw driver would help you to secure the hose clips easily, ensure a smooth oil transfer.
  • 【Widely Application】This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc.
Check Stock

BOYISEN Oil Change Pump Extractor 12v 80W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Orange)

  • ...rt and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping. D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.
  • 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
  • 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. The hose clip enable to thoroughly seal the connection and prevent leaking. A screw driver would help you to secure the hose clips easily, ensure a smooth oil transfer.
  • 【Widely Application】This Scavenge Suction Kit is portable and easy operation, it saves time and keep clean for your oil changing. It is a great helper for Car, Motorcycle, Scooter, Quad Bike, Truck, RV, ATV, Boat, Marine, Forklift, Generator, Tractor, Ride On Mower Etc.
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock