Top Polyimide Fep Film Reviews

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock

4 PCS Film Heater, Icstation PI Heating Film 12V 7W Adhesive Polyimide Heater Plate 25mmx50mm

【Fast Preheating Speed】Uses polyimide as an insulator outside, and the thermo foil as an electric heating element inside. During normal operation once the interior is within operating temps, the temperature is very stable..
【Extremely Thin】Lightweight, and flexible polyimide heaters can quickly provide heat to where it is needed. Widely used in electronics manufacturing, medical devices, scientific instruments..
【Safe to Use】Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Safe to use with stable performance..
【Durable】Equipped with self-adhesive can be fixed on the item surface easily.They are formated through high temperature high-pressure and heat-sealing process..
【12V Polyimide Heater Film】 Heating films can not control the temperature itself. You can use it with a temperature controller. Working Voltage: DC 12V, Power: 7W, Maximum Temperature: about 100℃..

Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.

Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..

Check Stock

Calorbot 5 PCS FEP Film 200x260x0.15mm for Anycubic Photon Mono x 6k 4k/Elegoo Saturn MSLA Mono/QIDI Tech S Box/ 8.9 9.25 inch LCD UV 3D Printers

Fep Film Size & Wide Compatibility: (200x260mm.
Quantity: 5 PCS) FEP Release Film for Elegoo Saturn, Anycubic Photon Mono x 6k 4k, 8.9 inch UV 3D Printers, MSLA Mono, qidi tech s-box, Anucubic Photon..
Peeling Force: good peeling performance, meet the release requirement of various products, can be reused..
High transparency: UV transmittance is over 95%, which is perfect for printing and provides product quality..
Corrosion resistance: not affected by almost any strong acid, strong alkali, oxidant, and other solvents, Non-tacky, high cleanliness product surface provides product release and durability..
Easy to install and use: it is very easy to install according to the installation instructions. If you are not satisfied with our Fep Film Or service, we guarantee a full refund. Please Feb assured to buy..

Check Stock

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

...r all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono SE, Photon S, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..

Check Stock

MG Chemicals - POL100-15 Polyimide Tape for 3D Print Beds, High-Temperature, 4' Width x 49' Length

Superior quality Polyimide tape for 3D printing of ABS Filaments. Use for multiple prints before having to change the tape..
High temperature tape for filaments requiring heated build beds.
Apply an ABS Slurry to the tape so your ABS prints stick to the heated bead..
Polyimide tape has 1 mil of Polyimide film with 1 mil of silicone adhesive.

Check Stock

Sovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer

Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono Se , QIDI TECH....
Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing.....
With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage..
2021 New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP....
Perfect spare resin vat when you need to change resin color faster and have a better printing experience..

Check Stock

Icstation 12V 12W Flexible Polyimide Heater Plate Adhesive PI Heating Film 10mmx93mm

【Warm tips】These new heater films are going to supply in pack of 4pcs, but very sorry that we mixed with some independent Packing. If you purchase 4pcs but only get 1pc, please contact with service team freely, we will resend to you for free or refund as a compensation as per your request. The rest inventory is on sale, until new packages restock. Thanks a million for your kindly understanding!.
Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process..
Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments.
Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
Equipped with self adhesive can be fixed on the item surface easily. Working Voltage: DC 12V, Power: 12W, Film Size: 93 X 10mm/3.66 X 0.39inch(L*W), Maximum Temperature: about 170℃ Ship out by USPS with tracking information and 7-15 days delivery time usually.

Check Stock

Opret 5 Pcs FEP Release Film Replacement for ELEGOO Saturn/ANYCUBIC Photon Mono X LCD 3D Printer 185x260mm 0.15mm Thickness 95% Light Transmittance for 8.9 & 9.1 inch Screens

High Compability: Suitable for most LCD/SLA 3D Printer which print size no more than 260 x 185mm, including Anycubic Photon mono X/ Anycubic Photon S/ELEGOO Saturn/ELEGOO Saturn S /Creality LD-002H.
95% Light Transmittance: Ensures high stability of UV lightning, improve the success rate of printing and printing effect.
Easy to Replace: Compared with other products, we offer a more easy-to-follow tutorial on the package.
For Long Term Usage: Heat resistant, premium quality, Perfectly smooth, scratch free. Each FEP film is protected with 2 film protectors.
What you will receive: 5 PCS FEP Release Film, well-packaged design, quick and better customer service.

Check Stock

ELEGOO Mars 3 MSLA 3D Printer Machine UV Photocuring LCD Resin 3D Printers with 6.66 inch 4K Mono LCD and Upgraded COB UV Light Source Printing Size 143.36mm x 89.6mm x 175mm

...rs of continuous printing, which greatly extends the service life..
【Excellent Build Quality】 Z-axis solid liner guide structure has better stability with an accuracy of 0.001mm .The sandblasted build plate provides much stronger adherence and makes the model not easy to fall off during printing..
【Upgraded FEP Film 2.0】 The FEP film is upgraded to version 2.0. Compared with 1.0, 2.0 has lower release tension and protects small supports from being broken, which improves the integrity of model details and the success rate of printing..
【After Sales】 Mars 3 3D Printer comes with CHITUBOX Pro Slicing Software for FREE one year. We provide 1 year warranty on the whole printer(Excluding 4K LCD, FEP Film and Tool Kit)..

Check Stock