Top Polyimide Acrylic Adhesive Tape Reviews

High Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

5 Rolls 20mm x33m(108ft) Heat Tape High Temperature Heat Resistant Tape Heat Transfer Tape Thermal Tape Sublimation Tape Heat Vinyl Press Tape Up to 260℃(500℉) for Soldering Circuit Board, No Residue

  • [HIGH-TEMPERATURE RESISTANT] - Our heat resistant tapes for sublimation are polyimide film tapes provide heat resistance up to 260℃, reliability and durability, Heat resistance: short period heat resistance: 260℃(500℉).
  • long period heat resistance: 220℃（428°F）.
  • [REASONABLE SIZE] - The heat resistant tape is 20mm/0.8 inches in width and 33m /108ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
  • [WIDELY USED] - The heat tape for heat press is not only suitable for sublimation on cups and heat transfer vinyl, but also for protecting electrical wires,electric motor,soldering, 3D printing, PCB boards, electrical insulation, high-temperature powder coating and other DIY projects.
  • [STRONG ADHESIVE] - The heat transfer tapes are made of polyimide film with silicone adhesive, it is easy to stick, not easy to break while peeling and leaves no residue after peel away. Works well in coffee mug press, heat press, T shirt application or other thermal transfer printing.
  • [MEET YOUR NEED] - Package includes 5 rolls heat press tapes. ★ If you have any questions about the ....
Check Stock

Heat Resistant Sublimation Tape,Heat Vinyl Press Tape for Heat Transfer,High Temperature Tape for Soldering,Electronics Masking,Protecting Circuit Board Multi,Heat Resist Up to 482℉(24mm x 98ft x 2)

  • Material:Heat resistant tape is a Polyimide Polymers Film tape with silicone adhesive and high temperature resistant adhesive.It's really indispensable when sublimating and the tape can do the job smoothly..
  • Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board.
  • Package included:High temp tape comes with 3 different size that is fit for your masking, soldering, electronic repair .The width of the tape in variety width, 4.7 Inch(4 rolls ),7 Inch （3 rolls ）and 9.4 Inch（2 rolls ）.it is 30 meters (98 feet) long..
  • Transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
  • Easy use: Superior performance of the heat resistant. Strong silicone adhesive is easy to stick and no residue after peeling off..
Check Stock

MEBMIK 6 Rolls 10mm x33m(108ft) Heat Tape for Sublimation,Heat Transfer Tape,Heat Resistant Tape,Adhesive Transfer Tape,Thermal Tape,No Residue

  • Heat transfer tape is a polyimide film tape with a high temperature resistant adhesive..
  • Heat resistant tape comes off clean，easy peal and no residue..
  • It's a heat sublimation tape for heat press,it's really indispensable when sublimating and the tape can do the job very well..
  • Length: 33m /108ft. Heat resistance: 250°C.Color: mainly tawny..
  • You will receive a package containing 6 rolls heat press tape..
Check Stock

2 Rolls Heat Tape 50 mm x 108 ft High Temperature Polyimide Tape, 572 Fahrenheit Degree Heat Resisitant Heat Transfer Tape Adhesive Tape for Soldering, Electrical, Masking, 3D Printer Application

  • ...hat you get: you will receive 2 rolls of quality heat resistant tapes in brown color, each roll measures approx. 50 mm/ 2 inch in width and 33 meters/ 108 ft in length, it's long enough to meet your most different needs, can serve you for a long time.
  • Reliable material: the high temperature tapes are made of quality polyimide film, durable and sturdy, which is resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion, and will not easily leave residue on the surface when tearing them.
  • High temperature: the temperature range of heat resistant tape from long-term temperature -73 degree centigrade (-100 Fahrenheit degree) to 300 degree centigrade (572 Fahrenheit degree) , which can work well in protecting electronic products, electric motor, solder, as well as painting, packing fixing, printing board.
  • Easy to use: this 3d printer tape has nice heat and solvent resistance, and minimal shrinkage after baking, easy to paste and not easy to break while while you are peeling it off, so you can use it with confidence.
  • Wide range of uses: the polyimide adhesive tape can be applied on baking, sublimation insulating circuit boards, automotive sensor and manifolds, fiber optics cable, high temperature coating and semiconductor manufacturing, capac....
Check Stock

EQUTY BAYMERS 2 Rolls 20mm X 33m 108ft Heat Vinyl Press Tape,Heat Resistant Sublimation Tape for Heat Transfer,Adhesive Transfer Tape for Electronics Masking,Soldering, Protecting Circuit Board

  • Heat resistant tape is a polyimide film tape with heat adhesive..
  • Maximum heat resistance: 482 ¨H (250¡æ)£¬comes off clean£¬easy peal and no residue..
  • It's really indispensable when sublimating and the tape can do the job very well..
  • The width of the tape is 20mm (0.8inch),it is 33 meters (108 feet) long..
Check Stock

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

2 Rolls 10mm X 33m 108ft Heat Tape,Heat Resistant Tape,Heat Transfer Tape,Thermal Tape,Sublimation Tape,Heat Vinyl Press Tape,No Residue,High Temperature Tape,Electronics,Soldering,Circuit Board

  • Heat resistant tape is a polyimide film tape with a high temperature resistant adhesive..
  • Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue..
  • It's a heat tape for heat press,it's really indispensable when sublimating and the tape can do the job very well..
  • The width of the tape is 10mm (2/5inch),it is 33 meters (108 feet) long..
Check Stock

QDiShi 2 Rolls 10mm X 33m 108ft Clear Heat Tape, Heat Resistant Tape, Thermal Tape, Sublimation Tape, Heat Vinyl Press Tape, No Residue, High Temperature Tape for Sublimation with Dispenser, White

  • Clear Heat transfer tape is a polyester film tape with a high temperature resistant adhesive..
  • Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue..
  • It's a heat tape for heat press ,it's really indispensable when sublimating and the tape can do the job very well..
  • High Electric Insulativity: The polyimide tape has excellent electrical properties, the breakdown voltage is above 4500V..
  • The width of the heat tape is 10mm (2/5inch), it is 33 meters (108 feet) long. 2 rolls of tape in 1 package..
Check Stock

3M Foil Tape [UL 181 A & B listed/Linered] (3340): 2-1/2 in. x 30 ft. (Silver)

  • 3M 3340 Foil Tape is a high temperature, high strength aluminum foil tape coated with a cold weather acrylic pressure sensitive adhesive. This tape is constructed using a 2.0 mil aluminum foil backing with a strong, pressure sensitive acrylic adhesive for long-term adhesion, along with for releasing poly coated kraft paper liner to protect the adhesive and keep the tape ready for use. The aggressive acrylic adhesive performs in both cold and hot temperature conditions..
  • An essential requirement for sealing ducts and other surfaces for heating, ventilation and air conditioning systems is foil tape that can stand up to hot and cold temperatures. The foil backing of 3M 3340 serves as an excellent barrier against moisture, dust, and many chemicals. The very low moisture vapor transmission rate makes the tape a good sealant and the acrylic adhesive supplies superior temperature and UV resistance to give you a strong, lasting, and reliable bond..
  • 3M Foil Tape is used in industries such as transportation, metalworking, construction, automotive, military and government, general industrial, electronics, aerospace, and more..
Check Stock

Mr. Pen- Heat Tape, 10mm x 33m(108ft), 2 Rolls, Heat Tape for Sublimation, Heat Resistant Tape, Heat Transfer Tape, High Temperature Tape, Thermal Tape, Heat Press Tape, High Heat Tape

  • Package includes 2 pcs of heat tapes to meet your daily needs in different situations like heat press transfer, masking, electronic repair, and DIY projects..
  • Mr. Pen heat tape measures 0.4" in width and 108 fts in length and is made of polyimide film with silicone adhesive, providing superior performance and easy sticking. The heat-resistant and strong silicone adhesive makes the heat transfer tape easy to stick and no residue after peeling off..
  • This heat-resistant tape is compatible with a wide temperature range of up to 260℃ (536℉). (Heat resistance: short period heat resistance: 260℃ (500℉) Long period heat resistance: 220℃ (428℉)). The heat press tape protects electronic products, electric motors, painting, packing fixing, and printing PCB board..
  • Mr. Pen heat tape leaves zero marks or residue on any material. It gives a clean peel without leaving messy and grubby marks and doesn’t bother you with the smell..
  • Our heat press tape can help you with your business needs of heat pressing and electrical wires, 3D printer, PCB boards, automotive insulation, high-t....
Check Stock

FEPITO 6 Rolls Heat Tape for Heat Press Resistant Temperature Polyimide Tape,Ideal Solution for Heat Transfer,Sublimation,Heat Vinyl Press,3D Printing Electronics,Soldering,Circuit Board and More

  • EXCELLENT THERMAL DURABILITY:Heat resistant tape is a polyester film tape with a high temperature resistant adhesive,and the long-term temperature is -73°C (-99°F) to 260°C(500°F),the short temperature is 662 ℉(350℃)..
  • GOOD COMPREHENSIVE PROPERTIES:Not easy to break while peeling,and the tape also offers excellent resistance to moisture, acids,and chemicals.Works well in Heat press,3D Printing, Soldering, T shirt application or other Thermal transfer printing..
  • LEAVES NO RESIDUES:Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape..
  • WIDELY USE:The polyimide tape has excellent electrical properties, the breakdown voltage is above 4500V.The width of the tape is 2/5.
Check Stock

3M 4905 Clear Double Sided General Purpose Acrylic Tape, 2.5" Diameter Circles (roll of 100)

  • Clear Tape: this transparent tape has been designed to use with glass or acrylic objects and maintains a strong adhesion. It can be used at the place of rivets, screws, spot welds, or liquid adhesives.
  • Durability: the acrylic tape has been durably manufactured and creates permanent bonding. The tape can be used in the heavy-duty working environment, as it is resistant to UV light, moisture, chemicals, and harmful solvents.
  • Dual-Sided Adhesion: the tape is a double-sided adhesive that helps ensure a smooth appearance eliminating the hassles of drilling, riveting, or weld distortion.
  • Applications: use the clear adhesive to bond transparent, thin or lightweight materials. The acrylic adhesive tape can be used to mount backlit signs and thus is ideal for restaurant, lodging, and entertainment industries.
  • Specifications: the 0.025 in. thick VHB tape circle measures 2.5 in. in diameter. This pack contains 100 tape circles.
Check Stock