Top Poe Support Reviews

Samsung SL30 Digital Camera USB Cable 5 USB Data Cable - 8 Pin - Replacement by General Brand

  • Support 48V active POE switch and active POE devices,Not Support passive POE switch and Passive PoE devices..
  • AI 250 meters Extend function，Automatically identify the transmission rate, automatically extend 100 meters or 250 meters according to the terminal....
  • The PoE Extender features one 10/100Mbps PoE input port and one 10/100Mbps PoE output port. Comply with IEEE802.3at and IEEE802.3af..
  • Designed for outdoor use. The PoE Extender includes watertight connectors on the input and output ends. IP66 rating for water resistant enclosure.....
  • Plug and Play, no other settings required. No external power required. Pin Assignment Input: Both 1/2, 3/6 and 4/5, 7/8, Output: 1/2 (-), 3/6 (+)..
Check Stock

TRENDnet 8-Port Gigabit Long Range Poe+ Switch, TPE-LG80, 65W Poe Budget, Ethernet/Network Switch, Long-Range Poe+ Extends Range Up to 200M (656 ft.), 16 Gbps Switching Capacity, Lifetime Protection

  • ETHERNET PORT CONFIGURATION: 8 Port Gigabit Long Range PoE+ Switch includes 8 Gigabit PoE+ ports provide a 16Gbps switching capacity to support edge network installations..
  • PoE+ POWER: A 65W PoE power budget supports up to eight Power over Ethernet devices. TPE-LG80, delivers data and power over Ethernet cables to PoE devices such as access points, VoIP phones, and IP cameras..
  • PoE and PoE+ SUPPORT: It supports both PoE and PoE+ devices with a 65W PoE power budget..
  • LONG RANGE PoE+: Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations..
  • PORT ISOLATION: Ideal for surveillance networking applications, the DIP switch also enables port isolation.
  • LOW-NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noise.
  • PLUG-AND-PLAY: Easy setup, simply power up the switch and plug in connected devices.
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • ...4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circu....
Check Stock

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....
Check Stock

Ubiquiti UniFi Dream Machine SE (UDM-SE)

  • Ubiquiti ER-X-SFP EdgeRouter X Gigabit Router 6-Port PoE, SFP, supports 24V passive PoE to power up to five airMAX devices. 5 Gigabit ports and 1 Gigabit SFP port for backhaul applications..
  • The EdgeRouter X SFP combines cost-effective routing performance with the convenience of passive PoE support in a compact form factor..
  • ER‑X‑SFP supports 24V passive PoE to power up to five airMAX devices..
  • At $79 USD MSRP the EdgeRouter X SFP offers a breakthrough combination of value and performance in routing with passive PoE support..
  • The EdgeRouter X SFP features 5 independent Gigabit RJ45 ports and 1 Gigabit SFP port all six are configurable for switching. SFP port provides fiber connectivity to support backhaul applications for carrier-class networks..
Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

  • 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
  • IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock

Cudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE

  • 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
  • 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
  • Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
  • Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
  • Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
  • 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check Stock

BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) – 96W – 802.3af/at| POE-SW811

  • 8 PoE+ Ports at 10/100Mbps each, 2 Uplink ports at 10/100/1000Mbps each.
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-8 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port..
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

Vonnision 4K POE IP Fisheye Camera, Mic. Audio in, 1.7mm Lens, 49ft Infrared, WDR, Metal housing, IP66 Water-Proof Indoor&Outdoor Panoramic Security Camera(Compatible with Hikvision/Dahua NVRs)

  • ... separated Mic. ). The case is made of metal, special design with IP66 waterproof Level and very user friendly for installation. Built-in Surge and Lightning Protection Devices for Bad Weather. Adopts 3pcs Matrix IR LEDs providing excellent night-vision up to 49 feet..
  • 【Compatible with Third-part NVRs/Softwares】 Support H.265/H.264 dual Compression(Default H.265) and Compatible with multiple 4K H.265/H.264 PoE NVRs and compatible with QNAP, NAS, FTP, Blue Iris and Ispy.
  • Plug&play with Hikvision,LTS, EZVIZ, Dahua, Lorex, Uniview, TVT and Raysharp NVRs after DHCP enable.(Default DHCP enable). SDK for our IP cameras could be provided for profesional customers(Contact to our Tech. support for SDK if you need)..
  • 【1 Year Warranty+Lifetime Tech. Support】 We Provide 1 year warranty and Lifetime Tech. support for this professional PoE 4K fisheye security camera.(via Amazon email or refer to the contact information on the camera label on the gift box..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Cudy 5 Port Gigabit PoE+ Switch 120 W, PoE Switch, 60 watts for Port1, 4 PoE Ports, 1 SFP, 802.3 at/af, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1005PTS1

  • 5 Port Gigabit PoE+Switch,120 Watts total PoE Budget + 4 Gigabit PoE Ports + 1 Gigabit Ethernet Uplink Port+1 Gigabit SFP Uplink Port ..
  • IEEE 802.3 at/af Compliant. Port #1 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #2 ~ Port #4 support IEEE 802.3 af / af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #4 will isolated from each other, can only communicate with Port #5 and SFP slot. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 and Port #4 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at standard. #Important Note: This item only support IEEE802.3 at / af device, does not support any non-standard or passive POE device.#.
Check Stock

Cudy 24 Gigabit Ethernet Unmanaged PoE+ Switch, 300W, 24 * 100/1000Mbps PoE+ Ports, 2 Gigabit SFP, CCTV/VLAN Mode, 19-inch Rackmount, 802.3af/at, GS1028PS2

  • 24 PORT | 24 x GbE PoE+ 300W | 2 x SFP: 24 Gigabit PoE+ ports with 300W total power budget, support up to 32w for one port. 2 Gigabit SFP Port provide flexibility in network access management.
  • One Key Switch for CCTV and VLAN: CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras. VLAN mode isolate the PoE+ ports from each other, which can improve the network environment and reduces network maintenance costs..
  • PD Detect and PD Alive: PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). PD Alive check function (watchdog) supports monitor connected PD (Powered Device) status. If a PD stops working and responding, this PoE switch will reactivate the PD by resuming POE port power. It also support port power supply prioritization, guarantee the continuous power supply of key nodes..
  • Desktop and Rackmount Support: 19-inch metal shape supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box..
  • High Quality chipset inside: Use High Quality POE chipset to ensure stable operation of the product.Plug & play: Mode A alternati....
Check Stock