Top Poe Standards Reviews

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....

Check Stock

Netis Combo-Port Gigabit PoE Switch Max Output 140WTP & SFP Shared Interfaces (PE6310)

8 10/100 Mbps Ethernet ports, 210/100/1000 Mbps Ethernet ports supporting both copper and SFP connections.
Supports PoE power up to 30W for each PoE port, 140W for all PoE ports.
Supports PoE IEEE 802. 3at/aft compliant Powered Device (PD).
Complies with IEEE 802. 3at/aft standards.
Intelligent Power Management, Support configuration port power priority.

Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..

Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

...ower efficient, and cost effective compared to having multiple power adapters..
BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the newer HAT specifically for Raspberry Pi 4..

Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

[HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
[ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
[MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
[SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
[STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.

Check Stock

PLUSPOE 2-Pack Wall PoE Injector 48V 24W Power Over Ethernet Adapter 802.3af for Security IP Camera, IP Voip Phones, AP and More,10/100Mbps

Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply..
Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification..
PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive “Always On” power means all devices receive the same voltage (48v)..
Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports..
All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..

Check Stock

Netis P110C 8 POE+2 Uplink 100M Standard Fast Ethernet POE/ POE+ Switch with Plug and Play | IEEE 802.3at/af Compliant Powered Devices (PDs) with Auto MDI/MDIX Function | POE Power Budget of 120 W

8 x 10/ Auto-Negotiation RJ45 ports with Poe function(Port 1-4).
Supports Poe power up to 15. 4W for each Poe port, 62W for all Poe ports.
Supports Poe IEEE 802. 3af compliant Powered Device (PD).
Supports 1K MAC address table, MAC address auto-learning & auto-aging.

Check Stock

StarTech.com 4 Port Gigabit PoE (Power over Ethernet) Card - PCIe Network Card - PoE / PoE+ Up to 25W Per Port - PCIe NIC - Gigabit Ethernet Card (ST4000PEXPSE)

FULLY COMPLIANT: This 4 port Gigabit PoE card is fully compliant with IEEE 802.3at (Type 1 & 2) Power over Ethernet (PoE) standards.
PSE SUPPORT: This PCIe network card features a Power Sourcing Equipment (PSE) endpoint that supports up to 48V, 25.5 watts max. output per port.
POWER YOUR PoE DEVICES: Provide connectivity and power to compatible PoE devices, including cameras and wireless access points using this PCIe PoE Ethernet card.
ULTIMATE SUPPORT: The Gigabit NIC supports IEEE 802.3at, 802.3az Draft 2.2 Energy-Efficient Ethernet (EEE), 802.1q VLAN tagging, 802.1p Layer 2 Priority Encoding and 802.3x Full Duplex Flow Control.

Check Stock

Poe Switch, 10 Port Gigabit PoE+ Switch, Cloud Managed Gigabit Ethernet Switch, 8 Poe Ports @120W, 2 Uplink Ports, APP Smart Managed, Extend to 250M, Overload Protection w/ Port

... anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
Stable Power Supply, Efficient Data Transmission: The single-port maximum power of the switch is 30W and 120W of the whole machine. Supporting IEEE802.3af/at network standards, with output power of 15.4W/30W, ideal for PoE Camera, WiFi Access Point, IP Phone..
Sturdy Metal Casing And Less Noise Sturdy: Metal casing and powerful industrial-grade fans for better heat dissipation while effectively reducing noise, enabling longer-lasting operation in a variety of temperature environments, making the switch run more stable. Desktop or wall mountable.

Check Stock

Aumox 5-Port Gigabit PoE Switch with 4 x PoE 78W, Upgraded Fast Network Switch, Durable Metal Casing, IEEE802.3At/Af, Traffic Optimization, Plug and Play Unmanaged Ethernet Switch.

【Fast 4-Port 78W Gigabit PoE Switch】Supporting 802.3at/af network standards, 10/100/1000 Mbps RJ45 ports, including 4x PoE Ports with 1 x Uplink Port. Providing up to 30W per port and total PoE power budget of 78W..
【Fanless Sturdy Metal Case】Fanless design will effectively reduce noise and keep quiet. With durable metal casing, Aumox ethernet PoE switch features excellent durability and heat dissipation..
【Easy Plug and Play Installation】Simple plug and play setup with no APP to install or configuration needed, automatically detect devices, just plug in the power cord and network cable..
【Compact Size for Easy Use】Aumox PoE ethernet switch has small size with 7.9×4.6×1.7 inches, easily positioned on your desktop or a wall, saving more space..
【One-Key VLAN】Support One-Key VLAN, Port 1-4 will be isolated respectively but can communicate with the 5 port. Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing..

Check Stock

Aumox 18-Port Ethernet Gigabit PoE Switch, 16-Port PoE with 2 Uplink Gigabit Ports, 250W Built-in Power, Metal Casing and 19-inch Rackmount, Traffic Optimization, Plug and Play, Unmanaged(SG518P)

...configuration required. Full Gigabit port, high speed transmission, intelligent and powerful data transmission is realized by AUMOX rich features..
【Stable power supply, efficient data transmission】The single-port maximum power of the switch is 30W and 250W of the whole machine. Supporting IEEE802.3af/at network standards, with output power of 15.4W/30W, ideal for PoE Camera, Gaming, WiFi Access Point, IP Phone..
【One-Key VLAN】VLAN switch, PoE ports will be isolated respectively but can communicate with uplink port,Better Network Bandwidth, 100m fully gigabit distance and higher security. Ideal for PoE IP Camera, EAP, Access Point, IP Phone and other PD devices..
【Warranty】Every Aumox PoE switch is rigorously tested for reliability, quality, and performance. We supply a year warranty for whole products and lifetime technical support..

Check Stock

Tenda 8 Port Fast Ethernet Switch（S108）| Desktop Ethernet Splitter | Ethernet Hub | Plug and Play | Fanless & Quiet | Unmanaged

6 kV Lightning Protection: The switch offers various safety and protection types, including 6 kV lightening protection, PSE short-circuit protection, PoE overload protection, surge current protection etc..
Dual Uplink Port: With two 10/100Mbps uplink ports, the switch can meet the current demand for uplink bandwidth with NVR and router connection..
Standard PoE Power Supply: The switch support IEEE 802.3at/af standards. The entire switch offers a maximum PoE power output of 58 W, and 30 W for a single port, to supply power to and data transmission with IP cameras..
250 m Data Transmission:I t supports extend mode and one-key VLAN. The hardware DIP mode switch makes long distance transmission effortless..

Check Stock

Mikrotik BaseBox 2 Power Over Ethernet (PoE) Grey WLAN Access Point

The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture.
Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
PoE in: Passive PoE, Wireless 2.4 GHz number of chains: 2, Wireless 2.4 GHz standards: 802.11b/g/n, 10/100/1000 Ethernet ports: 1, Number of SIM slots: 1 Modem (Mini SIM), MiniPCI-e slots: 1, Number of USB ports: 1.

Check Stock