Top Poe Lighting Reviews

NOYAFA Network Cable Tester, RJ11 RJ45 Cable Tester for Telephone, Ethernet, Video, Tone Generator, Metal, Ethernet Cable Tester Cable Toner with Earphone Flashlight

  • ...ence Collation】 9 alignment test lights make alignment easy. G light is a shielded line of the test light. Alligator clip wire can test the open circuit and short circuit of the wire..
  • 【Humanized design】The network cable tester also has a low battery prompt function, lighting function, headphone function, adjust volume function, and so on, to ensure that you can use the product in various environments and avoid external interference..
  • 【Wide application fields & worry-free after-sales】 Multi-purpose network cable tester is widely used in telephone systems, computer networks, metal wire lines, and other fields. We provide lifetime friendly customer service. If you have questions, please contact us..
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

Tripp Lite Cat6a Junction Box Cable Assembly, Shielded Ethernet Extension Network Cable, Surface Mount, PoE+, RJ45/110 Punchdown, 18 in, Blue (N237A-P18N-WHSH)

  • EASY INSTALLATION: No wall plate? No problem! This Cat6a surface-mount assembly is recommended for above-ceiling applications where wall plate use is impractical or not ideal. The 18-inch Cat6a STP patch cable connects your Cat6a premise wiring to an IP camera, wireless access point (WAP), LED lighting scheme, sound equipment or other PoE+ device installed on a wall, ceiling or any other location far from a power outlet..
  • POWER OVER ETHERNET (PoE): This Cat6a STP patch cord is rated for high-speed 10 Gbps communications. Supply up to 24W of power to the connected PoE or PoE+ device, and save yourself the expense and effort of purchasing, connecting and installing new electrical wiring, outlets and individual power supplies. One end features a 110 IDC punchdown connector for secure permanent installation..
  • 3 YEAR WARRANTY & FREE TECH SUPPORT: Tripp Lite warrants this product to be free from original defects in material and workmanship for the duration of the warranty. If the product should prove defective in that time, Tripp Lite will gladly repair or replace it. Our Chicago-based Tech Support Team is ready to assist you, call them at 773-869-1234 M-F 8am-6pm CST..
  • INCREASED POWER: This network patch cable has been evaluated to for withstanding temp....
Check Stock

Network Cable Tester, Network Tester with TDR, Network Toner Tester with AC Filter, AT278 Multi-Functional Wire Tracker for RJ45, RJ11, BNC, Metal Cable, PING/POE

  • ...ches, which won’t burn out the device..
  • ⏩【Aditional Highlights】Come with TF card included to export data to PC.
  • Voltage detector: included in receiver (90-1000V).
  • Rechargeable Lithium battery for more efficient work. Low voltge alarm function and automatic delay power on-off. Big LCD color screen 320*240 and lighting lamp in darkness. Hub blink to locate network port by the flashing port light on a server/switch/hub/router port..
Check Stock

ANNKE NC800 4K PoE Security Camera Outdoor, 8MP IP Bullet Camera with F1.0 130 ft Color Night Vision, Smart AI Human/Vehicle Detection, IP67 Waterproof, Metal Housing, Audio Recording, Micro SD Card

  • [ NightChroma 4K Color Night Vision ] ANNKE NC800 night color Poe Camera with f/1.0 super aperture and built-in warm supplemental lighting, provides crystal 4K Ultra HD colorful nocturnal images even in complete darkness. The camera also supports up to 130 ft long-distance night vision range..
  • [ Smart AI Multi-Motion Detection ] With this full-color Poe IP camera, you will only get a push notification whenever a person or vehicle is detected on your property. It also supports Line Crossing, Intrusion, Region Entrance/Region Exiting Detection. This effectively reduces the unwanted false alerts. Recorded motion alerts can easily be reviewed with the Smart Search function..
  • [ MicroSD & NVR & FTP/NAS Storage] Record videos onto a 4K PoE NVR, a microSD card up to 256 GB, and FTP/NAS, without paying for monthly cloud storage fees and no contracts. You’ll have full control over your recordings whenever & wherever..
  • [ Easy PoE installation ] This security camera only needs a single Cat5e ethernet cable to connect it to the NVR. This cable provides video transmission, power the camera, a stable network connection, and installation flexibility up to 300 ft (as the camera does not need to be plugged into a nearby power source)..
Check Stock

Anpviz 4.0MP 2560x1440 POE IP PTZ Dome Camera Compatible with Hikvision ,4X Optical 16X Digital Zoom H.265+ Outdoor Security Camera Alarm Pan/Tilt SD Card Slot

  • ...2 mm fixed lens on this camera offers 57° to 19° (Wide-Tele) and Diagonal field of view: 135° to 39° (Wide-Tele)° field of view to cover and protect a wider area. For superior around-the-clock surveillance, you can count on the camera’s 120 dB true Wide Dynamic Range (WDR) that gains better images in diverse lighting conditions, as well as 3D Digital Noise Reduction (3D-DNR) and True Day/Night (ICR)..
  • 【High-Speed 330° Pan & 90° Tilt】 The high-speed dome PTZ IP camera rotates up to 330° horizontally & 90° vertically at up to 100°/s and supports 300 preset positions. Cover every angle with just a single camera. Connect the PoE camera to an NVR with just a single network cable without messy wiring. Notice: There is no Tour or Auto Tracking feature of this PTZ Camera..
  • 【 H.265+ Compression 】– Improves image quality and reduces bandwidth requirements. H.265+ format provides superior improvements in image quality and bandwidth. It also allows for faster, more fluid remote viewing, along with the ability to view more channels remotely. With H.265+ compression, you can store more information using fewer hard drives, which allows you to do more with less, and dramatically reduce file sizes with this latest video compression format.....
Check Stock

XM1000pro

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock

Goalake 6 Port Gigabit Ethernet Unmanaged PoE+ Switch, 4 Gigabit PoE+ @52W Built-in Power, 1 Gigabit Uplink + 1 Gigabit SFP Slot, 802.3af/at, VLAN Mode, 4kV Lightning Protection, AI Detection

  • 【VLAN mode 】VLAN mode(Turn on the VLAN switch) support isolate 4 PoE+ port from each other. It is easy for this 4 port PoE switch to manage and maintain ,Prevent broadcast storms, Prevent data confusion, Wireless networking application data is more stable..
  • 【Active poe switch with 802.3af/at compliant】Goalake poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【4 gigabit poe switch@52W 】PoE switch with 4 1000M PoE port + 1 1000M Uplink port,1 x 1G SFP,4×PoE ports providing up to 30W per port, total PoE budget 52W.1 gigabit ethernet Uplink Port for connecting NVR and Internet , etc...
  • 【4KV Lightning Protection】Goalake PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence..
  • 【AI Watchdog function of poe port】When the data or electrical transmission between the poe port and the term....
Check Stock

TRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K

  • GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
  • PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
  • INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
  • GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
  • PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
  • AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check Stock

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....
Check Stock

TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock