Top Pneumatic Oil Pump Reviews

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..

Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..

Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
Manually suction fluid with the engine oil....
Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
Time Flies: Draining oil from beneath a vehicle takes eons.
The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
This fluid extractor pump works at 85 PSI and a max....

Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....

Check Stock

3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters

◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.

Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....

Check Stock

DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel

4 gallon electric wheeled dolly styled air compressor with panel.
Oil lubricated pump improving durability.
4.0 CFM delivered at 90 PSI pump provides rapid recovery.
10-inch pneumatic wheel and handle kit for ease of mobility.
Top load panel with positioning holes allows unit to transport loads up to 100 lbs.
High-flow regulator for increased performance.

Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.

Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..

Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..

Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
An Air Motor Effective Dia. of 63mm 2.5" inch.
An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
A Long Pump Life of 840k Liters / 221k+ Gallons.
EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
This pump can be barrel, cart or wall mounted.
A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
Follow manual for setup and always use the proper add....

Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
A Long Pump Life of 960k Liters / 253k+ Gallons.
EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
This pump can be barrel, cart or wall-mounted.
A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
Follow manual for setup and always use the proper additional equi....

Check Stock

DYI Sheng TDS 1/2 inch Stainless Steel SUS 316 Air-Operated Double Diaphragm Pump Teflon Diaphragm Pneumatic Transfer Pump for Chemical and Industrial Use

[SAFETY and EXPLOSION-PROOF] The operating pressure is between 1~8.3 bar, driven by air pressure. A Pneumatic Double Membrane Pump can dry-run for extended periods of time without getting overheated. Blocked suction or discharge pipework, the pump will stop due to air pressure balance, and the pipeline pressure will not continue to rise, not causing the danger of pipeline rupture and liquid leakage..
[AODD PUMP CAN HANDLE A WIDE RANGE OF PH LEVELS] The pneumatic diaphragm pump design isolates the conveyed fluid from the pumping chamber. Diaphragm Pump is ideal for pumping highly corrosive and hazardous chemical fluids and volatile. Normal operation will not cause harm to the environment and operators..
[Wide Applications] The diaphragm pump is suitable for almost of fluids. Pumps can be widely used in the automation industry, water treatment, mining, petroleum, oil and gas, coating, printing, electroplating, chemical industry, electronics, construction, Pharmaceutical, metallurgy, and other industries..

Check Stock