Top Pneumatic Disconnect Fittings Reviews

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

SharkBite U714A Disconnect Clip, Push-to-Connect Fittings, SharkBite Fitting Removal Tool, 1 Inch

  • REMOVES IN SECONDS: 1 Inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustmentsREMOVES IN SECONDS: 1/4 inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustments.
  • COPPER, PEX, CPVC: SharkBite disconnect clip removes plumbing fittings that fit copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven and is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

FERRODAY Ball Lock Keg Disconnect Quick Ball Lock MFL Disconnect Flared 5/16” Gas 1/4” Liquid Barbed Stainless Swivel Nuts for Corny Keg Post Ball Lock Keg Fittings for Homebrew with Clamps

  • 【Ball Lock Disconnects for Beer Keg】 Barbed beer keg ball lock disconnect fittings with MFL swivel nuts for beer kegs connecting with other....
  • 【1/4" and 5/16" Barbs Already Included】 Complete ball lock keg disconnect fitting comes with 5/16” barb for white disconnect to connecting gas....
  • 【Long-Lasting Useful Keg Disconnect】 Classic ball lock keg fittings of safe materials, Strong ABS for main body, stainless steel for swivel nuts,....
  • 【Universal Ball Lock Quick Disconnect】 For most ball lock home brew Kegs. Gray disconnect for gas post, black disconnect for liquid post. Perfect....
  • 【No Leaks & No Regrets Purchase】 We have tested hundreds of times and no leaks! We are committed to offer you with high quality product as well as....
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (1/4 Inch OD)

  • You are provided: the package comes with 7 pieces 1/4 inch direct pneumatic parts (PU), 7 pieces 1/4 inch V two-way parts (PV), 7 pieces 1/4 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (3/8 Inch OD)

  • You are provided: the package comes with 7 pieces 3/8 inch direct pneumatic parts (PU), 7 pieces 3/8 inch V two-way parts (PV), 7 pieces 3/8 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

SharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A

  • SHARKBITE PVC DISCONNECT CLIP: 1/2, 3/4, and 1 inch disconnect tools are used to perfectly release a SharkBite PVC fitting from any white collar iron pipe-sized fittings.
  • can adjust or remove PVC SharkBite fittings in tight spaces for easy disassembly.
  • COMPATIBILITY: These push-to-connect fitting disconnect tools can be used to release the white collar of a SharkBite PVC fitting from schedule 40, 80, or 120 PVC pipe and schedule 40 and 80 CPVC.
  • ideal for marking proper safe seal insertion depth on a pipe for SharkBite fittings.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in....
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes Black,1/4 Inch Od

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

SharkBite 3/8 Inch to 1 Inch Pro Push to Connect Disconnect Tool, PEX Pipe, Copper, CPVC, PE-RT, HDPE, PROD3810

  • SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL: This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push-to-connect fittings in tight spaces for easy disassembly.
  • EASY TO USE: This handy disconnect tool can remove any type of fitting from 3/8 inch to 1 inch.
  • does not require any installation or interchangeable faceplates to allow for comfortable and convenient use.
  • DURABLE AND HIGH QUALITY: Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock