Top Pneumatic Clamps Reviews

BAND-IT CP16S9 5/8\ Wide x 0.025\ Thick 4\ Diameter, 201 Stainless Steel Center Punch Clamp (Pack of 25)

  • 201 Stainless Steel offers superior strength with good corrosion resistance to mild chemicals and fresh water.
  • Center Punch clamps use a punch style clamp for economy and ease of installation.
  • For general plant maintenance or emergency field repairs.
  • BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies.
  • Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or pneumatic production tool: SM1700.
Check Stock

BAND-IT CP3119 3/8\ Wide x 0.025\ Thick 1-3/8\ Diameter, Galvanized Carbon Steel Center Punch Clamp (100 Per Box)

  • Galvanized carbon steel band offers medium strength with medium corrosion resistance to mild chemicals and occasional fresh water.
  • Center Punch clamps use a punch style clamp for economy and ease of installation.
  • For general plant maintenance or emergency field repairs.
  • BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies.
  • Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or pneumatic production tool: SM1700.
Check Stock

BAND-IT CP10S9 5/8\ Wide x 0.025\ Thick 2-1/2\ Diameter, 201 Stainless Steel Center Punch Clamp (Pack of 50)

  • 201 Stainless Steel offers superior strength with good corrosion resistance to mild chemicals and fresh water.
  • Center Punch clamps use a punch style clamp for economy and ease of installation.
  • For general plant maintenance or emergency field repairs.
  • BAND-IT Center Punch Clamps are constructed with a double wrap of band material which increases the holding power of clamped assemblies.
  • Center Punch Clamps can be installed with BAND-IT hand tools: S03869, or T30069, or pneumatic production tool: SM1700.
Check Stock

Medium Spring Clamps Pair – Easy Squeeze Bandy Clamps Woodworking for Thinner Stock & Delicate Moldings – One-Handed Operation Medium Clamps – Easy to Grip Nylon Hand Clamps w/Fiberglass

  • Bandy Clamps for Woodworking: You'll find it easier than ever to clamp edge moldings of almost any contour with our clever new medium rockler bandy clamp pair..
  • Ideal For Delicate Moldings: One easy squeeze is all it takes with our clamps set which has a wide variety of edging profiles. These squeeze clamps are ideal for thinner stock and delicate moldings..
  • Easy Operation: The spring clamp set combines the easy one-handed operation of a spring clamp with the even pressure and no-mar qualities of a super-tough rubber band..
  • High-Strength Material: Our clamps for cutting are made from high-strength nylon with fiberglass fill for added durability. The handle of our hand spring clamps is over-molded with an easy-to-grip rubber for greater comfort and control.
  • Works Great! The spring clamp tool works great for keeping power cables, extension cords, and pneumatic lines out of your way as you work. You'll find countless uses for it around the house as well as in the shop!.
Check Stock

DE-STA-CO 202 Hold-Down Action Clamp

  • One of the most popular series in our line of vertical hold-down clamps. Ideal for use in checking fixtures.
  • Ergonomic handle grip included, along with T-handle options.
Check Stock

DE-STA-CO 202-TU Vertical Hold-Down Action Clamp

  • One of the most popular series in our line of vertical hold-down clamps. Ideal for use in checking fixtures.
  • Ergonomic handle grip included, along with T-handle options.
Check Stock

Vico Marine Flex Support Rubber Flex Support

  • Made of rugged 304 stainless steel construction, rust and sturdiness, good corrosion resistance..
  • They are great parts for providing pressure and accurate positioning.Easy to install and convenient to use, simply press it in for fastening..
  • Widely applicable for mechanical devices, mechanical industry fasteners, pneumatic tools, clamps, molds, automatic machines..
  • There are total 10 pcs of ball plungers in one set that you may use for many projects, suitable for cabinets, cabinets, drawers, doors, etc..
Check Stock

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

  • This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
  • Barbed edges provide positive connection..
  • Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
  • Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..
Check Stock

Wztepeng CV Joint Boot Installation Tool, CV Axle Removal Tool, CV Boot Tool Compatible with: Vtt, Toyota, Corolla, Audi, BMW, UTV, ATV

  • Simple single-button operation expands the CV boot in seconds to fit over the CV joint.
  • Available separately or in a kit with CV Boots, grease, and clamps.
  • Each tool supplied with an Industrial Milton 1/4 In. body 1/4 In. NPT air hose nipple and an instruction sheet.
  • Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.
Check Stock

Babydoll Lingerie for Women,Women's Sexy Fishnet Lingerie Sparkle Rhinestone Stripper Outfits Exotic Sets

  • TACKLE TOUGH SANDING JOBS: The 315 pneumatic straight line sander’s twin piston design keeps extra power in reserve to prevent stalling and handle heavy duty sanding jobs, like smoothing down body filler or shaping and leveling large flat surfaces.
  • ERGONOMIC DESIGN: Every detail of the tool is shaped to fit your hand perfectly and the lever throttle takes pressure off of your palm.
  • ADJUSTABLE: With variable speed up to 3,000 reciprocating strokes per minute, you can adjust the sander’s output according to the task at hand.
  • LOW VIBRATION: Two handle design provides a low vibration operation for smooth, precise performance.
  • PAPER SIZE: Paper size should be 17.5” long to accommodate wrap-around clamps.
Check Stock

826 Pieces Universal O-Ring Kit, SAE Metric Rubber O-Ring Washer Assortment Kit for Plumbing Automotive Faucet Repair More, Nitrile Rubber O Ring Set with 4 Pick & Hook

  • ★【826PC Faucet Repair Kit 】This O-Ring Assortment Set holds 407pcs SAE standard rubber o-rings and 419pcs metric universal standard rings Provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repairs and much more..
  • ★【Have 32 Sizes】Metric O-rings standard have 32 sizes from 3 mm I.D. to 50 mm I.D. SAE O-rings standards have 32 sizes from 1/8” I.D. x 1/4” O.D. to 2” I.D. x 2-1/4” O.D. and outer diameters from 6 to 57mm..
  • ★【Oil Seal Hook】Comes with 4pcs extra hook and pick set, it will allow you to easily remove O-Rings and various seals and bushings. The long shaft allows you to access areas that conventionally sized hook and picks just can't reach. These long hooks and picks are perfect for removing hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets and more!.
  • ★【Premium Quality】Our o ring assortment made of high quality rubber construction gives these o-rings oil and UV resistance, make rings with extra thick wall design provides long-term use. idea for repairing cars, faucets, pipes, hydraulics, pneumatic machines, and more.
  • ★【Easy to Storage】Each one comes in a heavy-duty plastic storage case that keeps each size separated and org....
Check Stock

SHZOND Bag Air Jack 6600LBS Weight Capacity 3 Bag Pneumatic Jack Handy and Easy Storage Air Jack Lift for Fast Set Up on Frame Machine (3 Bag air Jack)

  • Bag air jack weight capacity:6600lbs.Working pressure: 145Psi/10Bar/1.0Mpa.
  • Pneumatic jack lifting height range: 5.71”-15.75”.Air inlet: G1/4.Lifting time: 5sec.Working Temp: -60℃~ 50℃.
  • Powerful and very fast to use.Triple bag jack is the easiest and fastest way to install pinch weld clamps on the frame machine.
  • The air jack has large stressed area, fits on soft and easy-collapsing terrain.
  • Do not try to lift weight beyond capacity.
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock