Top Plumbing Cutter Reviews

AccEncyc PVC Pipe Inside Cutter Kit 1/4\ Hex Shank Plumbing Inside Cutter Internal Plastic Pipe Cutter with 6Pcs Saw Blade

  • PVC Pipe Inside Cutter Kit: Including 3pcs saw blades of 32mm/1.25" diameter, 3pcs blades of 44mm/1.75" diameter, 1/4" hex shank, serrated & flat washers, fasten screws..
  • Heavy Duty & Strong: The quality carbon steel shank features with the high hardness and smooth surface for good handling. Made of strong HHS and coated with the protective oil, the saw blades are durable, sharp, rust & corrosion-resistant..
  • Perfect Cutting: The plumbing inside cutter is not only great for cutting PVC pipe, plastic pipes and wood, but also for some soft metal pipes with the help of coolant or water to cool the hot saw blade..
  • Work Efficiency: This internal plastic ABS pipe cutter is suitable for most electric drills. Small but practical and portable, effective to cutting the PVC pipes from the outside and inside..
  • Safety Precautions: When use this plumbing tool cutter, please wear gloves and goggles to prevent the flying spark. Keep away from children. The maximum speed of the saw blade cannot exceed 20,000 rpm..
Check Stock

Ezygrind Inside Pipe Cutter with 1 1/2\ (36mm) Diamond Blade

  • Pipe cutter for cutting plastic pipe 1 1/2" - 3" from the inside..
  • Internal pipe cutter includes 2 Free Flow Guide Wheels that stabilize the blade during cutting..
  • Plumbing tool with reduced cutting vibration for a smooth cutting action..
  • Inside PVC pipe cutter for cutting HDPE and ABS pipe in hard to reach places..
  • Internal PVC pipe cutter comes with a longlife diamond blade that can cut concrete..
Check Stock

Ezygrind Inside Pipe Cutter with 3 1/8\ (80mm) Diamond Blade

  • Pipe cutter comes with 2 Free Flow Guide Wheels for cutting 4" - 6" pipe from the inside..
  • Internal pipe cutter with a measured blade cutting depth for longer blade life and faster cutting..
  • Plumbing tool comes with a segmented diamond blade that will cut plastic and concrete..
  • Inside PVC pipe cutter attacks PVC, HDPE and ABS plastic fast without melting the pipe..
  • Internal PVC pipe cutter uses the Free Flow Guide Wheel to minimizes vibration..
Check Stock

Plumbing Inside Cutter, 1/4\ Hex Shank Pipe PVC Inside Cutter Internal Plastic Pipe Cutter(32mm Saw Blades*3, 44mm Saw Blades*1，Hexagon wrench）

  • Plumbing Inside pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), two sets of screw fastening parts and a hexagon wrench. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The plumbing saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pip....
Check Stock

PVC Pipe Inside Cutter, AngleKai Stainless Steel Plumbing Inside Cutter with 4Pcs Saw Blades(44/35/32MM), Internal Plastic Pipe Cutter with 1/4\ Hexagonal Rod for PVC Pipe Inside/Outside Cutter

  • ...et of PVC pipe inside cutter, including 4 saw blades (1.73in/ 44mm, 1.37in/ 35mm, 1.26in/ 32mm, 1.26in/ 32mm), a rich quantity to meet the requirements of different sizes of cutting pipes. There is a layer of protective oil on the saw blade, please wipe it clean before use..
  • ✦【Corrosion-resistance & Sturdy】The plumbing inside cutter is made up of high-quality 304 stainless steel, wear-resistant, sturdy, durable, and highly hard. The hexagonal connecting rod has a smooth surface, no burr, comfortable grip, and can be used for a long time..
  • ✦【Effective & Sharp】Saw blade has high glossy, features a smooth surface, and uniform and neat distribution of teeth, the sharp saw blade can help to cut the pipe quickly and effectively, 3 different sizes can be cut both internally and externally. The internal plastic pipe cutter can save time and effort..
  • ✦【Wide Application】PVC pipe inside cutter has a wide range of uses, not only suitable for cutting plastic tubes, but also suitable for cutting wood, and soft metals (Warming: Use with coolant and water to prevent overheating), is one of the essential tools for handymen..
  • ✦【Easy to Install】Place the flat washer into the screw first, then put the saw blade, next insert the serrated gasket, and f....
Check Stock

Inside Pipe Cutter, 1/4\ Hex Shank PVC Plumbing Inside Cutter Internal Plastic Pipe Cutter Set (32mm Saw Blades*3, 44mm Saw Blades*1）

  • Inside plumbing pipe cutter kit installation sequence: extension rod (first) - serrated washer - saw blade - flat washer - screw (last). The screws must be tightened and reinforced! Refer to the fourth photo for example~.
  • A set of plumbing PVC pipe internal cutter with 4 saw blades (3 blades with 1.25 inch diameter and 1 blade with 1.75 inch diameter), and two sets of screw fastening parts. Please protect the saw blade. There is a layer of protective oil on the saw blade. Do not mind. Refer to the fourth picture for parts installation sequence..
  • The saw handle is made of heavy-duty carbon steel for hardness, durability and smooth surface. The saw blade is made of strong HHS, durable and sharp, very suitable for PVC and plastic pipes, also can be used for soft metal pipes, but when cutting soft metal pipes, please use coolant or water when cutting to prevent the saw blade from overheating..
  • The overall length of plumbing pipe cutteris 10.5 cm(4.13"), and the length of the hexagonal handle is 2.8 cm(1.1"). The pipe cutter is suitable for most electric drills and is very easy to install and replace. Small in size and easy to carry, it is not only suitable for cutting from the outside but also for work scenarios where pipes need to be cut from the....
Check Stock

HEDWETO Faucet and Sink Installer Plumbing Tools 18-in-1 Multifunctional Plumbers Wrench Sink Faucet Basin Wrenchs for Tight Spaces Under Sink Kitchen Bathroom Toilet Bowl

  • APPLICATIONS -- Not all devices are suitable. Please check the 18 functions of this sink wrench in the pictures 2-4. Note that this is a metric....
  • FRIENDLY & EFFORTLESS -- A versatile plumbing wrench for homeowners to fix plumbing system without calling a plumber. Easy to install, use and reach....
  • MULTIFUNCTIONAL -- 18-in-1 Faucet and Sink Installer Tool for plumbing task in bathroom toilet bowl kitchen / under the sink by yourself (even non....
  • SMART DESIGN -- The open slot allows for easy access to your supply lines. Foldable handle design makes it easy to grip and rotate, prevent the....
  • WORRY FREE -- You will get: 1× Plumbing Tool, 1× Plastic Insert Head, 1× Aluminum Alloy Insert Head, 1× Phillips Screwdriver Bit, 1 × Cutter.....
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

ENGiNDOT 75Ft x 1/2 Inch Drain Cleaner Machine Fit 2”(50mm) to 4”(100mm) Pipes Plumbing, 5.8A Electric Sewer Snake Machine with 6 Cutters, Autofeed, Professional Drain Snake Sewer Pipe Cleaner

  • ❤Please read the User Manual carefully before use..
  • HIGH-QUALITY STEEL CORE CABLE: 75FT x 1/2" premium steel core cable ensures long-term durability. This drain cleaner machine can easily go through complex crooked pipes and clean away plumbing clogs, especially for 2" to 4" pipes, can be used for commercial or residential applications such as Sewer, Roof stacks, small floor drains, drainage pipes outside, etc..
  • PROFESSIONAL TOOL FOR PLUMBING CLEANING: Advanced autofeed Assembly technology makes cable in and out of the drain automatically, the automatic control saves effort, 5.8A motor, more powerful, makes cleaning more efficient. Once you own this sewer machine, you can clean pipes by yourself, rather than pay much to call a plumber..
  • CONVENIENT TO TRANSPORT: Heavy-duty 8" wheels design, makes it's easy to move drain cleaner machine to anywhere you want, the retractable handle for convenient transport and saving a lot of space when you need to store it. Strengthened metal frame ensures its long-term durability..
  • MULTIPLE CUTTERS: Equipped with 6 different shapes of cutters, Boring Bulb Cutter, C-cutter, Spade cutter, Side Cutter, Saw Tooth Cutter and Drop Head Auger, can be used for different pipes, the quick-change cutters with ease, satis....
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock

DURATECH Tubing Cutter 3/16\-1-1/8\(4-28MM), Copper, Aluminum, Brass and Plastic Tubing Compact Cutter, With Replacement Wheel

  • High-quality steel construction offers reliable durability and long-lasting service, this powerful cutter allows you to make clean and precise cuts. in addition, contains a spare wheel storage for easy replacement..
  • Extra compact design for plumbing work in hard-reach place, this compact cutter makes tight cutting jobs significantly easier and more manageable..
  • It features knurled feed screw knob that provides users with optimal cutting pressure control to produce superior clean cuts. 3 rollers for more precision cuts operation..
  • Only need to rotate the knob to grip the tube, revolve copper tubing cutter around the tube(taking care not to move the cutter as this could result in an uneven cut or damaged pipe), tighten grip smoothly after each full circle until full cut..
  • The copper tube cutter can cut through 3/16-inch-1-1/8-inch（4-28MM) copper, brass, aluminum, plastic or other thin tubes with superior ease and efficiency..
Check Stock

DURATECH Mini Tubing Cutter 1/8"-3/4"(3-19MM), Copper, Aluminum, Brass And Plastic Tubing Compact Cutter, With Replacement Wheel

  • High-quality steel construction offers reliable durability and long-lasting service, this powerful cutter allows you to make clean and precise cuts in addition，contains a spare wheel storage for easy replacement..
  • Extra compact design for plumbing work in hard-reach place, this compact cutter makes tight cutting jobs significantly easier and more manageable..
  • It features knurled feed screw knob that provides users with optimal cutting pressure control to produce superior clean cuts. 2 rollers for more precision cuts operation..
  • Only need to rotate the knob to grip the tube, revolve copper tubing cutter around the tube(taking care not to move the cutter as this could result in an uneven cut or damaged pipe), tighten grip smoothly after each full circle until full cut..
  • The copper tube cutter can cut through 1/8"-3/4"(3-19MM) copper, brass, aluminum, plastic or other thin tubes with superior ease and efficiency..
Check Stock

IWISS PEX TUBING Cutter & KG-1096 F2098 Clamp Cinch Tool Kit Bundle

  • Plumbing Tools fits all pex cinch clamps except for Zurn Quick Clamp.
  • This tool is factory adjusted and does not require any additional calibration or adjustment.
  • This tool is universal and will work with Stainless Steel Clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1" with Calibration Gauge.
  • Capacity: IWISS PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in.....
Check Stock