Top Plumbing Code Illustrated Reviews

Watts Premier WP116187 Top Mount Twist Air-Gap Monitored Faucet, Brushed Nickel

TUBING SPECIFICATIONS: 1/4 inch Blue tube approximately 4 feet in length for connecting drinking water, 1/4 inch Red tube approximately 4 feet in length for connecting to the air gap of the faucet, and 3/8 inch Black tube approximately 3 feet in length for the connection to the drain.
PLUMBING CODE: This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes. US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch)..
See attached installation manual in the Technical Details section.

Check Stock

Drain Line Adapter (DLA) With 1/2-inch Barb Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher (ET116-004, D-50B, DLA-D)

...nector accommodates various inside diameter (ID) dishwasher hoses (1/2-, 5/8-, 3/4-, or 7/8-inch). Its reverse osmosis 1/2-inch barb insert fits 1/2-inch ID RO drain tube. A hose coupler and stainless steel clamps are provided for a secure connection to the garbage disposal inlet. The ET116-004 installation enables plumbing pipes to stay intact..
❤ DRAIN LINE CONNECTION: The ET116-004 enables the connection of the RO water filter to a garbage disposal with a dishwasher. Installing the ET116-004 is simple and allows bypassing the existing plumbing but with no pipes to undo..
❤ QUIET OPERATION: The ET116-004 is designed to eliminate most reject water noise. It is also equipped with a self-cleaning port..
❤ CERTIFICATION: The ET116-004 is legal to install in any state. It is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested. These certifications assure that ET116-004 is safe to use. The testing is conducted for every manufactured lot to ensure consistent performance..

Check Stock

Drain Line Adapter (DLA) With 1/4-inch Quick Connect Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher (ET116-001, D-25QC, DLA-D)

... dishwasher connector accommodates various inside diameter (ID) dishwasher hoses (1/2, 5/8, 3/4, or 7/8-inch). Its reverse osmosis 1/4-inch push-in connector fits 1/4-inch RO poly tubing. A hose coupler and clamps are provided for a secure connection to the garbage disposal inlet. The ET116-001 installation enables plumbing pipes to stay intact..
❤ DRAIN LINE CONNECTION: The ET116-001 enables the connection of the RO water filter to a garbage disposal with a dishwasher. Installing the ET116-001 is simple and allows bypassing the existing plumbing but with no pipes to undo..
❤ QUIET OPERATION: The ET116-001 is designed to eliminate most reject water noise. It is also equipped with a self-cleaning port..
❤ CERTIFICATION: The ET116-001 is legal to install in any state. It is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code), and NSF (National Sanitation Foundation) tested. These certifications assure that ET116-001 is safe to use. The testing is conducted for every manufactured lot to ensure consistent performance..

Check Stock

HoldRite QuickStand 22 Inch Water Heater Stand, Up to 52 Gallons, Unassembled, 40-S-22-U

WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
assembled QuickStand measures 22 inches in diameter by 16 inches in height.
CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 52 gallons.
VERSATILE: This water stand can be installed on concrete or framed walls.
can also support other equipment such as tanks, washers, and boilers.
CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.

Check Stock

HoldRite QuickStand 30 Inch Water Heater Stand, Up to 100 Gallons, Unassembled, 40-S-30-U

WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
assembled QuickStand measures 30 inches in diameter by 16 inches in height.
CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 100 gallons.
VERSATILE: This water stand can be installed on concrete or framed walls.
can also support other equipment such as tanks, washers, and boilers.
CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.

Check Stock

Eastman 24 Inch Water Heater Stand with Screws, 75 to 100 Gallons Load Rate, 86279

WATER HEATER STAND: The Eastman Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
WHAT IS INCLUDED: This water stand is easy to assemble and includes safety clips to fasten the stand to the wall or floor so that nothing can shake your water heater off its place.
CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 100 gallons.
VERSATILE: This water stand can be installed on concrete or framed walls.
can also support other equipment such as tanks, washers, and boilers.
CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.

Check Stock

Practicon 7078713 Gleco Trap System 64 oz.

Side drain siphons out all water prior to removal, eliminating spillage.
Adapts easily to existing plumbing - the Gleco Trap is the only plaster trap to meet US Uniform Plumbing Code.

Check Stock

Flashers #7 Black EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6\ to 11\) - 100% Made In The USA

MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce.
EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit..
Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile..
Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors..
Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC)..

Check Stock

Flashers #3 Silicone High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4\ to 5\) - 100% Made in The USA

MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce.
Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit..
Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile..
Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors..
Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC)..

Check Stock

Flashers #7 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6\ to 11\) - 100% Made in The USA

MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce.
Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit..
Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile..
Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors..
Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC)..

Check Stock

Coupling, PVC, 40, 8 In., Slip x Slip

Cleanout plug for closing the end of a cleanout adapter.
Male NPT threads for connecting to female threaded pipes.
PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
Operating temperature range of 73 to 140 degrees F (23 to 60 degrees C).
Complies with ASTM D2665 and ASTM D3311 and certified to NSF/ANSI International Standard 14 (NSF-dwv) and NSF International Uniform Plumbing Code (NSF-U.P. Code).

Check Stock

Everflow GWHSE55 Seismic Water Heater Restraining Strap, Galvanized Steel, 55 gallon Chrome 90''

SAFETY: secures water heater to wall, preventing extreme injury and explosion.
SUPERIOR QUALITY: durable galvanized steel construction for ultimate protection.
COMPLETE KIT: includes 2 adjustable straps, brackets, screws, nuts and washers.
ADJUSTABLE FIT: works with any size heater, up to 55 gallon.
COMPLIANCE: complies to The Residential Building Code and Uniform Plumbing Code.

Check Stock

WOODBRIDGE B1536-BG-Drain &O Bathtub, 59\

...on and keeping water at its desired temperature longer and suitable for 1 or 2 persons bathing..
[drain and overflow customization]: choose the drain and overflow finish that perfectly matches with your bathroom's existing décor..
[sealed drain design]: fully integrated sealed overflow and drain system not only meet plumbing code but also prevent risks of future leaks during installation.
[CERTIFICATION & WARRANTY]: Products are in compliance with CSA B45.5-17/IAPMO Z124-2017, approved and meet the Massachusetts Plumbing & Gas Code. Woodbridge warrants 1 Year limited warranty to be free of defects in material and workmanship and US based product support team is happy to assist with any sales or product-oriented queries. .
[easy installation]: freestanding installation allow you to install on anywhere with a floor drain outlet.

Check Stock