Top Plate Lens Reviews

Welding Helmet, Shade 3 and 8-12, Black

  • Price For: Each Headgear: Ratchet Material: Nylon Features: 1/10, 000 sec. Lens Speed, Sensitivity and Delay Control 0.10 to 1.0 sec., TIG Rating 20A, Auto-On/Auto-Off Power Control Includes: (2) AAA Batteries, Magnifying Lens Holder, (5) Outside and (2) Inside Cover Lenses Grind Mode: No Color: Black Lens Shade: 3, 8-12 Plate Width: 3-3/4" Switching Speed: 1/10, 000 sec..
  • Viewing Area: 5-1/5 sq. in. TIG AMP Rating: 20A Plate Height: 1-2/5" ADF Controls: Analog Graphics: None Battery Life: 2000 hr. Standards: ANSI Z87.1+2010, CSA Power Source: Battery and Solar Series: Classic Battery Type: AAA Item: Auto Darkening Welding Helmet Electromagnetic Sensor: No Number of Arc Sensors: 2 Country of Origin (subject to change): South Korea.
Check Stock

iShoot Metal Lens Collar Tripod Mount Ring Compatible with Canon RF 100-400mm f/5.6-8 is USM, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove

  • ... lens surface when installed correctly.
  • there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation.
  • hollow-out weight reduction design, net weight is about 160g.
  • 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate..
  • 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly..
  • 5. The lens collar IS-RF140 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure..
Check Stock

Metal Tripod Mount Ring D (B) Lens Collar Support Holder Bracket for Canon EF 100mm f/2.8L Macro is USM Lens, Replaces Canon Tripod Mount Ring D (B)

  • Compatible with Canon original tripod mount ring D (B) design, with precise all-metal material processing and surface hardening treatment, fine, smooth and wear-resistant.
  • Junctions of new version are fixed by steel needles.
  • the bottom is electroplated copper nut, more exquisite and perfect.
  • The lens collar is made of all-metal material, there is a 1/4 screw hole at bottom.
  • the lens support bracket with flocking inside and locking knob, combining tightly to the lens without gaps, sturdy and durable.
  • The surface is treated with automobile-painting, and the color is consistent with the lens, integrated with the camera and lens.
  • The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate.
  • also reserved 1/4" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly..
  • Compatible with: Canon EF 100mm f/2.8L IS USM Macro Lens, Not compatible with Canon EF 100mm f/2.8 USM Macro Lens..
Check Stock

iShoot Lens Collar Tripod Mount Ring Socket Compatible with Nikon Nikkor Z MC 105mm f/2.8 VR S, Metal Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove

  • 1. The tripod mount ring is tailor-made based on the shape and structure of Nikon Nikkor Z MC 105mm f/2.8 VR S lens, retains the switch function and is installed close to the lens mount. No stickers can be attached to the mounting part. After installation, only support horizontal shoot, not support vertical shoot, and the tripod ring Can't rotate.
  • 2. The lens collar adopts irregular shape, the edges and corners are polished.
  • and the surface contacting the lens is affixed with 3M plastic film, preventing the lens from scratches.
  • the inner diameter of the lens holder is about 71mm, the maximum width of this contact surface is 20mm.
  • 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate..
  • 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly..
  • 5. The lens collar IS-ZMC105 can be combined with clamp mount converter IS-3950MFT (Sold Separately), which can be used for hydraulic heads with Manfrotto structure..
Check Stock

Welding Helmet, Auto Darkening, 1-9/16in.H

  • Price For: Each Headgear: Ratchet Material: Nylon Item: Auto Darkening Welding Helmet Includes: Lithium Battery, Magnifying Lens Holder, (5) Outside, (2) Inside Cover Lenses Features: 1/15, 000 sec. Lens Speed, Sensitivity and Delay Control 0.10 to 1.0 sec., TIG Rating 5A, Auto-On/Auto-Off Power Control, Accessible Bottom-Mounted Control, (2) Modes (Weld Mode, X-Mode), Integrated Grind Shield Battery Type: Lithium.
  • Viewing Area: 5.8 sq. in. Plate Height: 1-9/16" Graphics: None Electromagnetic Sensor: No Standards: ANSI, CSA Switching Speed: 1/15, 000 sec. Battery Life: 2000 hr. EN379 Classification: 1, 1, 1, 2 Series: Classic ADF Controls: Knobs Power Source: Battery and Solar Number of Arc Sensors: 3 Grind Mode: Yes Lens Shade: 4, 9 to 13 Color: Black Plate Width: 3-3/4".
  • Country of Origin (subject to change): South Korea.
Check Stock

iShoot Lens Tripod Mount Ring for Tamron 100-400mm f/4.5-6.3 Di VC USD A035 CNC Machined Lens Collar Support Bracket Holder Bottom is ARCA-Swiss Fit Quick Release Plate for Tripod Ball Head

  • This lens collar is tailor-made for Tamron 100-400mm f/4.5-6.3 Di VC USD (A035).
  • the tripod mount ring is referencing to and modified from Tamron original standard design, details are improved, quick release plate feature is added to the bottom, more practical than the original lens collar.
  • The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 180g.
  • the inner diameter of the tripod ring is about 81.5mm, the width is about 18mm, with 3M film inside for protecting the lens from scratches.
  • The bottom of the lens bracket is 90mm detachable lengthening quick release plate, with 1/4” and 3/8” screw holes and stainless-steel anti-slip screws at the bottom.
  • The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid.
  • precisely machined by world-class high-end CNC turning center, surface anodic oxidation.
  • appearance and exquisite workmanship is much better than similar products made by mold.
  • This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD ....
Check Stock

Spider Holster - SpiderPro Lens Collar Plate v2 - Easily Carry a Camera with Long Lens on Your Spider Holster! - Compatible with Canon, Sony, Nikon, Fujifilm

  • ✅ FOR LONG LENSES: Designed to be used with telephoto lenses 70-200mm+. Compatible with any Spider Camera Holster..
  • ✅ STRONG CONSTRUCTION: Stainless Steel and aluminum construction is ready for daily use, in and out of the studio..
  • ✅ LEFT OR RIGHT CARRY: Plate comes with x2 pre-installed SpiderPro pins, allowing for carry on either side..
  • ✅ TRIPOD COMPATIBLE: The SpiderPro Lens Collar Plate v2 has x1 built-in 1/4"-20 threads which pair with any tripod quick-release plate..
  • ✅ INCLUDES: 1 SpiderPro Lens Collar Plate v2, 1 Adjustment Wrench, 2 SpiderPro Pins (pre-installed).
Check Stock

iShoot Lens Collar Tripod Mount Ring Support Bracket Holder for Sony FE 24-240mm f/3.5-6.3 OSS, 24-105mm f/4 G OSS, 16-35mm f/2.8 GM, 24-70mm f/2.8 GM, 35mm f/1.4 ZA, 50mm f/1.4 ZA, 85mm f/1.4 GM

  • This lens collar is tailor-made for Sony FE 24-240mm f/3.5-6.3 OSS and other lens (see the below description).
  • the tripod mount ring is referencing to the lenses, quick release plate feature is added to the bottom, more practical than similar lens collar.
  • The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 155g.
  • positioning by the switch and bayonet. Cannot be rotated. All corners are grinding rounded, the inner diameter of the tripod ring is about 61.5mm, the width is about 18mm, with 3M film inside for protecting the lens from scratches.
  • The bottom of the lens bracket is 55mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom.
  • The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid.
  • precisely machined by world-class high-end CNC turning center, surface anodic oxidation.
  • appearance and exquisite workmanship is much better than similar products made by mold.
  • This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot....
Check Stock

iShoot All-Metal Retractable Long-Focus Lens Support Stand Foldable Telephoto Zoom Lens Bracket Camera Holder Bayonet Protector with 1/4 Screw IS-TB01

  • 1. The long-focus lens support‘s main body made of aviation aluminum, CNC precisely machined, surface oxidation treated.
  • weight bearing joints and screws made of 304 stainless steel, weight about 140g.
  • 2. The distance of the screw holes connecting quick release plate is about 23mm.
  • with three joints with damping, foldable and retractable.
  • 3. The telephoto lens bracket can be used with iShoot quick release plate QS-120, QS-220, or QS-350 (Sold Separately), installed between long-focus lens and camera body, sharing the weight of the camera mount, to protect long- focus lens and camera mount from damage, but also increase stability..
  • 4. Package Includes: 1 x iShoot Long-Focus Lens Support IS-TB01 (Note: the other items in the photos not listed here are for illustrating only, not included).
Check Stock

Tripod Mount Ring, iShoot Lens Collar Support Compatible with Canon EF 100mm f/2.8L Macro IS USM Lens (Replace Canon Tripod Mount Ring D), Built-in ARCA Type Camera Quick Release Plate for Tripod Head

  • ...terial and technology based the old version tripod ring TMR.
  • The inner diameter of this tripod ring is about 68mm. The surface contacting the lens is affixed with thicken flocking, the width of this contact surface is 18mm.
  • The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate.
  • also reserved 1/4" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly.
  • The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid.
  • precisely machined by world-class high-end CNC turning center, surface anodic oxidation.
  • appearance and exquisite workmanship is much better than its old version and the similar products made by mold.
  • This lens support bottom is added Quick Release Plate feature of 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK..
Check Stock

iShoot Lens Collar Support, CNC Machined Tripod Mount Ring for TS-71 Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens, Bottom is ARCA Fit Quick Release Plate for Tripod Ball Head of ARCA-SWISS Type

  • 1. The lens collar is tailor-made for Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens, can?t be used with Sigma 150-600mm f5-6.3 DG OS HSM Sports lens..
  • 2. The tripod mount ring's inner diameter is about 80.5mm, width is about 22.5mm, with 3M film inside, preventing lens from scratches.
  • 3. The tripod collar bottom is added 75mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly.
  • more practical than lens collars without QR-Plate..
  • 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly..
  • 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold..
Check Stock

Pyle License Plate Frame Rear View Backup Camera - Reverse Parking Assist Night Vision Waterproof Marine Grade Cam Distance Scale Line Display w/ 170° Wide Viewing Angle & LED for Low Light -PLCM16BP

  • FRAME MOUNT STYLE: Pyle rearview backup camera is like a plate frame mounted on a license plate. It is a durable metal frame with a very solid backup camera. It holds the license plate securely without blocking the license plate info..
  • WIDE VIEWING ANGLE: 170° viewing angle macro lens with angle adjustable camera lens. Also built in with IP67 waterproof, the camera will work fine in all weather conditions. A compact camera system with wide angle lens ability with 512 x 492 pixel..
  • MARINE GRADE WATERPROOF: IP67 high waterproof level, the reverse camera would never be fogged or wet even in a storm or bad rainy day. Plus, the professional shockproof design that assures safety and security assist camera does just work for your vehicle..
  • NIGHT VISION ILLUMINATION: Built-in with LED light for low light performance especially at night. It also features reverse parking assist where outputs distance scale lines are displayed for safe parking..
  • POWERFUL ADDITIONAL FEATURE: Auto image adjustment with colored picture output and 1.0v pp-77 Ohm video output. Horizontal resolution at 420 TV....
Check Stock

Anbee Carbon Fiber Camera & Gimbal Guard + Lens Hood + Lens Cap Bundle for DJI Phantom 3 Professional/Advanced Quadcopter

  • Anbee Carbon Fiber Gimbal Guard Plate + Lens Hood + Lens Cap Bundle.
  • Compatible for: DJI Phantom 3 Professional & Advanced, Not fit Phantom 3 Standard or Phantom 3 SE.
  • Effective Protect Camera when Quadcopter Landing on Rough Ground Outdoor , Lens Cap protect Your camera Lens During Storage and Transport..
  • Package List: 1x Gimbal Guard, 1x Lens Cap, 1x Lens Hood..
  • Phantom 3 Quadcopter for Display only, Not include for sale!.
Check Stock