Top Plate Hanger For Small Plates Reviews

2 Pieces Wall Plate Hanger Decorative Dish Holder 8Inch/10Inch/12Inch/14Inch/16Inch Invisible Plate Dish Hanger Wall Display Hooks Home Decor (14 Inch)

  • The hanger is easy to assemble to use. If you are looking for a hanger to hold your plate, this gadget will be your best choice..
  • The wall plate hangers are almost invisible from the front, with expandable springs, flexible for decorating porch, wall and holding plates..
  • Sturdy and durable, it can hang different kinds of items, and noteasily fall off.Suitable for decorating porch, wall andholding plates..
  • This kind of hanger is very useful andpractical in our daily life.Fit for holding round or square plate..
  • Size:8inches(for 20-23cm / 7.87-9.05 inches dia plate).
  • 10inches(for 24-27cm / 9.44-10.5 inches dia plate).
  • 12inches(for 27-32cm/10.5-12.5inches dia plate).
  • 14inches(for 32-37cm/12.5-14.5inches dia plate).
  • 16inches(for 37-42cm/14.5-16.5inches dia plate).
Check Stock

40 Pieces Invisible Adhesive Plate Hanger Vertical Plate Holders for The Wall Hooks Decorative Plates Wall Holders for Display 1.25 Inch

  • Package Include: you will receive 40 pieces invisible adhesive plate hangers, you can apply them according to your own needs..
  • Hide Hooks:These invisible hanger allows plates to hang flat against the wall with adhesive back design.and not easy to fall off..
  • Wide Applications: These plate hangers fit for decorative plates, antique china, antique plates, art, photo and so on, which can make your house look more beautiful and more artistic..
  • Size information: Our invisible adhesive plate hangerthe size of the vertical plate holder is 1.25 x 1.25 inch/ 3.2 x 3.2 cm, which can hold up to 1.5 pounds, and the diameter of the board is up to 10 inches.
  • You can use 2 or more hangers to store heavier items..
  • Quality Material: the adhesive plate hanger is made of quality ABS material, which is durable and not easy to break, and the hook is made of stainless steel, A fixing that will not age-harden or deteriorate with time..
Check Stock

Btibpse Legs Mounting Plates, Furniture Leg Hanger Bolts, Sofa Legs Attachment Plates Kit for Sofa Table Couches Leg T-Plate 5/16\ (M8)

  • Package included: 4 Pcs T-Plate, 4 Pcs 5/16 inch (M8) hanger bolts, 4 Pcs 5/16 inch (M8) female converters, 16 Pcs screw adapters for 5mm unthreaded holes..
  • Beveled hanger bolts hole: the hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate.
  • Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy installation within minutes: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

Fasunry 12 Pack Plate Hangers 6 8 10 Inch Wall Plate Hangers and 16 Pack Wall Hooks Compatible 6 to 10.5 Inch Decorative Plates Antique China Antique Plates and Arts

  • [MULTIPURPOSE PLATE HANGERS]: Perfect fit for antique plates, art plates, vintage plates, ceramic plates, photo plates, dinner plates, dessert plates,....
  • [RUBBER TIP PROTECTORS]: These plate holders with rubber tip protectors, great for protecting the plates rims, you can apply to the end of hangers to....
  • [INVISIBLE & ADJUSTABLE]: These plate hangers and hooks are almost invisible from the front, expandable length springs. Easy to use and hold tightly....
  • [WELL MADE & PERFECT SIZE]: The wall plate hanger is made of top quality brass with golden color, well-made, sturdy, not easy to get rust. 6 Inch, fit....
  • [FUNCTIONAL HANGING HOOKS]: Included 16 functional hanging hooks, great for hanging plates, arts, photos, clothes, bags, umbrellas, clocks, keys and....
Check Stock

Banberry Designs Brass Vinyl Coated Plate Hanger 8 to 10 Inch - Set of 4 Pcs - Clear Vinyl Sleeves Protect the Plate - Hook and Nail Included

  • POPULAR SIZE PLATE HANGER This most popular size of plate hanger fits most collector plates 8" to 10".
  • STURDY BRASS METAL WIRE is covered with clear protective sleeves.
  • VINYL scratch-proof sleeves over the metal. Hook and nail included.
  • IDEAL for hanging plates on a wall. Hangs plates 8 to 10 Inch in diameter.
  • BANBERRY DESIGNS is a registered brand protected by Trademark and is distributed by Relevant Gifts..
Check Stock

Hillman 122048 Plate Hangers 5-1/2"-8" with Tip Protectors, 1

  • Includes 30 lb. Hillman Professional Brass Picture Hanger.
Check Stock

TRIPAR 14-20 Brass Plate Wires Plate Hanger

  • Includes 30 lb. Hillman Professional Brass Picture Hanger.
Check Stock

Hillman 122052 Plate Hanger, 11 Inch, Brass

  • Includes 30 lb. Hillman professional Brass picture hanger.
  • Weight ratings are based on hangers nailed into studs.
Check Stock

DAN SPEED Invisible Adhesive Plate Hanger, 40/80 Pieces Vertical Plate Holders for Wall Hooks for Decorative Plates and Art Supplies 1.25 Inch (80pcs)

  • Package includes: You will get 40/80 pieces DAN SPEED invisible adhesive plate hangers, enough for your daily use and replacement.
  • Wide Applications: These DAN SPEED plate hangers fit for decorative plates, antique china, antique plates, art, photo and so on, which can make your house look more beautiful and more artistic..
  • Self-adhesive design: These DAN SPEED invisible vertical plate holders with adhesive back design, can fix firmly on the wall or other smooth surface, and not easy to fall off.
  • Size information: Our invisible adhesive plate hanger the size of the vertical plate holder is 1.25 x 1.25 inch/ 3.2 x 3.2 cm, which can hold up to 1.5 pounds, and the diameter of the board is up to 10 inches.
  • You can use 2 or more hangers to store heavier items..
  • Material: The adhesive plate hanger is made of quality ABS material, durable and reusable.
Check Stock

Leg Mounting Plates, 4 Sets Furniture Leg Attachment Plates, 5/16\(M8) Industrial Grade Flat Mounting T-Plates with Hanger Bolts, Screws, Strengthen Weak Furniture Repair Damaged Sofa Couch Seat

  • 【Widely Application】 The mounting plates fit most types of furniture in the market, is good helper in repairing the furniture, attaching legs to new or damaged sofas, couches, seats, ottomans and more, no more wobbly leg..
  • 【Industrial Standard】 Each T-plate is 2" x 2" and 1/4" deep (approx), plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts, have 4 unthreaded holes..
  • 【Easy to Install】No need to purchase compatible hanger bolts and the screws, can be installed in a few minutes. package includes all necessary parts, 4 pcs sofa leg mounting plates, 4 pcs M8 hanger bolts, 4 pcs M8 female converters, 16 pcs screw..
  • 【Convert to U.S. Standard Legs】 If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. standard legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 【Sturdy & Durable】The strong mounting plates is made of premium metal, can hold up the furniture well and extend the life of yourcouch, dresser, table and ottoman. if you have any question about our mounting plates, please feel free to contact us immediately..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

AOWISH 4-Pack Stainless Steel Furniture Legs Furniture Foot Upgraded & Thickened Cabinet Metal Legs 2 Inch Diameter Shelves Sofa Table Kitchen Adjustable Feet with 16 Screws (4 inch/100mm-Black)

  • ✔ SET OF 4 LEG MOUNTING PLATE - 4pcs of 49*49mm /2"*2" T-Plate, 4pcs of M8 hanger bolts, 4pcs of M8 female converters, 16pcs of screw adapters for 5 mm unthreaded holes.
  • ✔ CONVERT TO U.S. STANDARD LEGS - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use standard 5/16” and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame.
  • ✔ FURNITURE REPAIRING REPLACEMENT - this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc.
  • ✔ WIDELY APPLICATION - These plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • ✔ EASY TO INSTALL - No need to purchase hanger bolts and the other screws separately. You can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...s to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock