Top Plastic Hose Fittings Reviews

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
To install fittings, pull up lever on ball lock disconn....

Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
10-foot (3m) long vacuum hose for ample room to reach your equipment.
Small diameter for flexibility and maneuverability.
LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....

Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

Adapter for connecting pipes or fittings of different types.
Fitting connects to hose on one end and has an NPT female connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

Expandable 100FT Garden Hose Pipe - Lightweight, Durable& Felxible - 8 Function Spray Gun/Hose Hanger/Storage Bag/Brass Fittings for Lawn/Pet/Car/Boat Wash (Black-100ft)

☀IMPROVED HIGH QUALITY GARDEN HOSE☀ – leak-resistant connection / anti-rust metal fittings / On Off valve setting / nature latex pipe. never worry kink, twist or tangle. 100% satisfaction guaranteed with 1 year free placement warranty and 180 days money back guaranteed !.
☀ RASS TAP CONNECTOR☀ – expanding hose fits the typical outdoor garden taps in US, this expandable garden hose is equipped with high quality 3/4″ adapters and 3/4″on-off valve. has solid brass fittings that Handle water pressure better than plastic fittings which maximum avoids of hose leaking water..
☀MULTIFUNCTIONAL SPRAY GUN☀ – come with 8 functions spray gun,Angle+Flat+Full+Shower+Centre+Stream+Cone+Mist. you can switch the pattern for your use easily, the ergonomic rubber handle is non-slip and comfortable..
☀ EXPANDING GARDEN HOSE PIPE☀ – flexible garden hose is non kink garden hose and aluminium end-ducting create a ability that is 3 times expansion length in use.thickening latex inner hose pipe combined with tightly knitted outer fabric bring good performance in expanding up and withstanding pressure without leaking or bursting..
☀ What you get☀ – Garden hose comes with 1 year free replacement warranty ,1x 100ft Garde....

Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
【Easy to install】: Quick disconnect simply push tubing in, no to....

Check Stock

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....

Check Stock

Hourleey Garden Hose Shut Off Valve, 2 Pack Heavy Duty 3/4 Inch Solid Garden Hose Shut Off Valve with 10 Extra Rubber Washers (Black)

Solid brass: The Hourleey brass garden hose shut off valve is made of solid brass, making the hose valve durable, leak-free and rust-proof..
Pakcage includes: 2 pack garden hose shut-off valve (each includes a hose washer) and an additional 10 pack garden hose washers..
Easy to use: The large plastic handle is ergonomically designed, it is more comfortable to use, and the water flow is easy to adjust..
Highly applicable: Fit any 3/4-inch garden hose threaded watering equipment and most types of garden hose connectors, and faucets, watering devices also can be installed. High-replacement garden hose fittings can provide complete flow and sturdy fittings..
Good Service -- If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..

Check Stock

Xiny Tool Brass Garden Hose Shut Off Valve, Heavy Duty 3/4 Inch Solid Brass Garden Hose Shut Off Valve with 4 Extra Rubber Washers (4)

Solid brass: Xiny Tool brass garden hose shut off valve is made of solid brass, making the hose valve durable, leak-free and rust-proof..
Highly applicable: Fit any 3/4-inch garden hose threaded watering equipment and most types of garden hose connectors, and faucets, watering devices also can be installed. High-replacement garden hose fittings can provide complete flow and sturdy fittings..
Easy to use: The large plastic handle is ergonomically designed, it is more comfortable to use, and the water flow is easy to adjust..
Pakcage includes: 4 pack garden hose shut-off valve (each includes a hose washer) and an additional 4 pack garden hose washers..
Good Service: If you have any questions, please feel free to contact us, we will reply you within 24 hours..

Check Stock